GB/T 35160.6-2017Test methods for agglomerated stone—Part 6: Determination of impact resistance (English PDF)
合成石材试验方法 第6部分:耐冲击性的测定
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 35160.6-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 29, 2017
Implementation date
November 1, 2018
Scope
GB/T 35160.6-2017 is the English-translated version of 合成石材试验方法 第6部分:耐冲击性的测定.
GB/T 35160.6-2017 is the Chinese standard "Test methods for agglomerated stone—Part 6: Determination of impact resistance". Its scope clause reads: GB/T 35160 provisions of this part of the synthetic stone impact resistance test terms and definitions, principles, equipment, sample preparation, test Test procedures, test results and test reports.
This section applies to the determination of synthetic stone impact resistance test. Its clauses include terms and definitions; principle; equipment; sample preparation; test procedures.
Found what you need?
Document preview — GB/T 35160.6-2017
National Standard of the People's Republic of China
- ICS
- 91.100.15
- Classification
- Q 21
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 principle
- 5 equipment
- 6 Sample Preparation
- 7 test procedures
1 Scope
GB/T 35160 provisions of this part of the synthetic stone impact resistance test terms and definitions, principles, equipment, sample preparation, test
Test procedures, test results and test reports.
This section applies to the determination of synthetic stone impact resistance test.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 35165 Synthetic stone terms and classification
3 Terms and definitions
GB/T 35165 defined terms and definitions apply to this document.
4 principle
By releasing the ball from a certain height until the sample is broken.
5 equipment
5.1
mass of 1.0kg ± 0.1kg, a diameter of about 6.3cm steel ball.
5.2
can control the ball for free fall movement switch device.
5.3 A vertical rod from 0cm ~ 120cm marked every 5cm scale, the switch device can be fixed on the slide.
5.4 A minimum area of 40cm × 40cm, the depth of not less than 30cm box, the box tiled no less than 20cm thick dry sand,
Sand particle size in the range of 1mm ~ 1.5mm.
6 Sample Preparation
Randomly from the same batch of products made of not less than 4 side length 20cm × 20cm of the sample, the thickness of the actual product thickness. Sample should be kept
The actual product to retain the decorative surface, such as sandblasting surface, matt, polishing and so on.
7 test procedures
Place the specimen surface up in the center of the box, embed the edge in the sand until the sample surface is exposed, and the surface of the specimen remains level.
Open the switch device so that the ball free fall, the impact position should fall on the center of the sample to avoid repeated impact of the ball bounce. Record from […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 35160.6-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 35160.7-2026 — Test methods for agglomerated stone - Part 7: Determination of ageing by xenon arc exposure
GB/T 35160.5-2017 — Test methods for agglomerated stone - Part 5: Determination of thermal shock
GB/T 35160.4-2017 — Test methods for agglomerated stone—Part 4: Determination of abrasion resistance
GB/T 35160.6-2017
$90.00