Valid

GB/T 33523.6-2017Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 6: Classification of methods for measuring surface texture (English PDF)

产品几何技术规范(GPS) 表面结构区域法第6部分：表面结构测量方法的分类

Preview PDF

This is a limited preview

Buy now to download the full PDF (20 pages)

Need quotation for your management?

Get a formal quotation for GB/T 33523.6-2017 in 30 minutes.

Issued by

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

Level / Type

National · Recommended

Issue date

February 28, 2017

Implementation date

September 1, 2017

Scope

GB/T 33523.6-2017 is the English-translated version of 产品几何技术规范(GPS) 表面结构区域法第6部分：表面结构测量方法的分类.

GB/T 33523.6-2017 — This part of GB/T 33523 specifies a classification system that is primarily used for surface structure measurement methods and defines three types of methods, Class methods, and a brief description of the specific methods.

This part is suitable for the classification of surface structure measurement methods.

Found what you need?

Document preview — GB/T 33523.6-2017

National Standard of the People's Republic of China

ICS: 17.040.20
Classification: J 04

Issued by: General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

Foreword
1 Scope
2 normative reference documents
3 terms and definitions
3.1 General terms

Foreword

GB/T 33523 "Geometrical Product Specifications (GPS) surface structure area method" is divided into the following parts.

- Part 2. terms, definitions and surface structure parameters;

- Part 3. Standardized operational set;

- Part 6. Classification of surface structure measurement methods;

- Part 7. Software measurement standards;

- Part 601. Nominal characteristics of contact (stylus) instruments;

- Part 602. Nominal characteristics of non - contact (confocal color difference probe) instruments;

- Part 603. Nominal characteristics of non - contact (phase - shift interference microscopy) instruments;

- Part 604. Nominal characteristics of non - contact (coherent scanning interference) instruments;

- Part 605. Nominal characteristics of non - contact (point auto - focus) instruments;

- Part 701. Calibration and measurement of contact (stylus) instruments.

This part is part 6 of GB/T 33523.

This part is drafted in accordance with the rules given in GB/T 1.1-2009.

This part is equivalent to ISO 25178-6..2010 "Geometrical Product Specifications (GPS) Surface Area Method Part 6. Table

Classification of surface structure measurement methods ".

1 Scope

This part of GB/T 33523 specifies a classification system that is primarily used for surface structure measurement methods and defines three types of methods,

Class methods, and a brief description of the specific methods.

This part is suitable for the classification of surface structure measurement methods.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this document. For undated references, the latest edition (including all modifications) applies to this document.

GB/T 3505-2009 Geometrical product specifications (GPS) - Surface texture - Terminology - Terms, definitions and surface structure parameters

(ISO 4287..1997, IDT)

ISO 25178-2 Geometrical product specifications (GPS) - Surface area method - Part 2. Terminology, definitions and surface structure

Parameters [Geometricalproductspecifications (GPS) -Surfacetexture. Areal-Part 2. Terms, definitions

andsurfacetextureparameters]

ISO /IEC Guide 99..2007 International Metrology Vocabulary Basic and General Concepts and Terminology [Internationalvocabularyof

metrology-Basicandgeneralconceptsandassociatedterms (VIM)]

3 terms and definitions

3.1 General terms

GB/T 3505, ISO /IEC Guide 99 and ISO 25178-2 and the following terms and definitions apply to this document.

3.1.1

Measure the coordinate system measurementcoordinatesystem

Coordinate system for surface structure parameter measurement.

Note 1. If the nominal surface is a plane (or part of a plane), the right-handed Cartesian Cartesian coordinate system, the X-axis, the Y-axis

In the plane where the nominal surface is located, and the X-axis is pointing in the direction of the scanning line, the Z-axis is pointing outward (from the material part to the surrounding

quality). In conjunction with Note 3 and 3.3.3 of 3.2.1, the Cartesian coordinate system is used in this section.

Note 2. The canonical coordinate system in ISO 25178-2 is also visible.

3.1.2

Surface profile

A contour that specifies the intersection of the plane and the actual surface.

Note. In practice, a plane is usually chosen to be parallel to the actual surface and in a suitable direction to select a plane.

[GB/T 3505-2009, Definitions 3.1.4]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.

How to Download GB/T 33523.6-2017

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.