GB/T 32710.7-2016Safety requirements for environmental testing and conditioning equipment—Part 7: Climatic and environmental test chambers (English PDF)

1 Scope

GB/T 32710 this part of the provisions of the measurement, control and laboratory with the wet test chamber, salt spray test chamber, mildew test chamber, low temperature

Test chamber, high and low temperature and low pressure test chamber, high temperature and low pressure test chamber, high and low temperature test chamber, high temperature test chamber, low pressure test chamber and xenon arc lamp

Weather resistance and electrical burns, mechanical hazards, flame spread out of the device, excessive temperature, fluid and fluid pressure, (Including lasers, sound pressure and ultrasonic pressure), release of gas, explosion and implosion, and biological and chemical hazards. but not

Including the reliability, performance or other characteristics of the equipment independent of safety, the validity of the shipping package, the EMC requirements, the

Fried environmental protection measures, maintenance (repair), maintenance (repair) personnel protection.

Note 1. The working temperature range of the climate and environment test chamber can be lower and/or higher than the ambient temperature. As a cold source, it can be from air and in air

Heat is absorbed in the product, as a heat source, you can air and the sample in the air to apply heat.

This part applies to the measurement, control and laboratory use of hot and humid test chamber, salt spray test chamber, mildew test chamber, low temperature test chamber, high and low temperature

Low pressure chamber, high temperature and low pressure test chamber, high and low temperature test chamber, high temperature test chamber, low pressure test chamber and xenon arc lamp weather resistance test

Box and so on.

Note 2. Such equipment and equipment may be probing chamber, may be a walk-in test chamber, it may be combined with vibration, shock and other comprehensive test chamber.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article

Pieces. For undated references, the latest edition (including all modifications) applies to this document.

GB/T 2423.1-2008 Environmental testing for electric and electronic products - Part 2. Test methods - Test A. Low temperature

GB/T 2423.2-2008 Environmental testing for electric and electronic products - Part 2. Test methods - Test B. High temperature

GB/T 2423.3-2006 Environmental testing for electric and electronic products - Part 2. Test methods - Test Cab. constant damp heat test

GB/T 2423.16-2008 Environmental testing for electric and electronic products - Part 2. Test methods - Test J and Guideline.

GB/T 2423.17-2008 Environmental testing for electric and electronic products - Part 2. Test methods Test Ka. Salt mist

GB/T 2423.18-2012 Environmental tests - Part 2. Test methods Test Kb. Salt mist, alternating (sodium chloride solution)

GB/T 2423.21-2008 Environmental testing for electric and electronic products - Part 2. Test methods - Test M. Low pressure

GB/T 2423.24-2013 Environmental tests - Part 2. Test methods - Test Sa. Simulated solar radiation on the ground and its test

Guidance

GB 4208-2008 enclosure protection class (IP code)

Safety of household and similar electrical appliances - Part 1. General requirements GB 4706.1-2005

GB 4706.13-2014 Particular requirements for safety and refrigerating appliances for household and similar electrical appliances, ice cream machines and ice machines

GB 4706.17-2010 Safety of household and similar electrical appliances - Particular requirements for compressors

GB 4706.71-2008 Safety and water supply installations for household and similar electrical appliances - Particular requirements for fixed circulation pumps

GB 4706.89-2008 Safety of household and similar electrical appliances Industrial and commercial high pressure cleaners and steam cleaners

Claim

GB 4793.1-2007 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 1. General requirements

Information technology - Equipment safety - Part 1. Generic requirements GB 4943.1-2011 […]