GB/T 32710.12-2016Safety requirements for environmental testing and conditioning equipment—Part 12: Salt baths (English PDF)

Foreword

GB/T 32710 based on GB/T 32710.1-2016 "Environmental testing equipment and equipment safety regulations Part 1: General"

GB 4793.1-2007 "Safety requirements for electrical equipment for measurement, control and laboratory use Part 1: General requirements" To develop.

GB/T 32710 "Environmental testing equipment and equipment safety regulations" is divided into 13 parts.

- Part 1. General;

- Part 2. cryogenic temperature cycling devices;

- Part 3. low temperature thermostat bath;

- Part 4. High temperature thermostatic circulation devices;

- Part 5. High temperature thermostat bath;

- Part 6. Biological artificial climate chamber;

- Part 7. Climate and Environmental Test Chamber;

- Part 8. Biochemical incubator;

- Part 9. Thermostat incubator;

- Part 10. electric drying oven and electric blast drying oven;

- Part 11. Air heat aging test chamber;

- Part 12. Salt tank;

- Part 13. Oscillators, oscillating thermostat tanks and oscillating incubators.

This part is part 12 of GB/T 32710.

This part is drafted in accordance with the rules given in GB/T 1.1-2009.

GB/T 32710.12 should be used in conjunction with GB/T 32710.1-2016 and GB 4793.1-2007. This section states "appropriate" The corresponding part of GB 4793.1-2007 is applied to this part; this part states that "replace" or "modify" This section shall prevail; this section specifies the words "increase", indicating that it shall comply with the corresponding provisions of GB 4793.1-2007 Add section in this section. In order to distinguish between GB 4793.1-2007, the number of the added section of this section starts at 101, for example 5.2.101, aa), bb) and so on.

This part is made by the China Machinery Industry Federation.

This part of the National Laboratory Equipment and Equipment Standardization Technical Committee (SAC/TC526) centralized.

1 Scope

This part of GB/T 32710 specifies the electrical shock and electrical burns of the salt tank for measurement, control and laboratory applications, mechanical hazards, flame from (Including lasers, sound pressure and supersonic pressure) and the release of gas, the effects of radiation, fluid and fluid pressure, Body, explosion and implosion and so on.

This section applies to salt tanks for measurement, control and laboratory applications.

This part does not include the reliability, performance or other characteristics of the equipment independent of safety, the validity of the shipping package, the electromagnetic compatibility (EMC) requirements, protective measures for the protection of the environment, maintenance (repair), maintenance (repair) personnel protection.

Note: If the whole or part of the salt tank is within the scope of this part and falls within one or more of the other parts of GB/T 32710,

GB/T 32710 other relevant standards.

2 Normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this document. For undated references, the latest edition (including all modifications) applies to this document.

GB 4208-2008 enclosure protection class (IP code)

Safety of household and similar electrical appliances - Part 1. General requirements GB 4706.1-2005

GB 4793.1-2007 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 1: General requirements

Graphical symbols for use in electrical equipment - Part 2. Graphical symbols ISO /TS 545 Technical Corrigendum

GB 17465 (all parts) Couplers for household and similar use

Safety code for environmental testing equipment and equipment - Part 1: General principles GB/T 32710.1-2016

ISO 7000:2004 Graphical symbols and lists for equipment (Graphicalsymbolsforuseonequipment-Index andsynopsis)

3 Terms and definitions

GB 4793.1-2007 Definitions and the following terms and definitions apply to this document.