GB/T 32692-2016Performance test methods for endurance braking systems of commercial vehicles (English PDF)
Also coversGBT32692-2016
This is a limited preview
Buy now to download the full PDF (30 pages)
Need quotation for your management?
Get a formal quotation for GB/T 32692-2016 in 30 minutes.
Issued by
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
Level / Type
National · Recommended
Issue date
June 14, 2016
Implementation date
January 1, 2017
Scope
GB/T 32692-2016 (Performance test methods for endurance braking systems of commercial vehicles) is available as an English-translated PDF.
GB/T 32692-2016 — This standard specifies the performance test method for the endurance braking system of commercial vehicles. This standard applies to commercial vehicles equipped with endurance braking systems.
Found what you need?
Document preview — GB/T 32692-2016
National Standard of the People's Republic of China
- ICS
- 43.040.40
- Classification
- T 24
Issued by: General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
Contents
- Foreword...4
- Introduction...5
- 1 Scope...6
- 2 Normative references...6
- 3 Terms and definitions...6
- 4 Test method...11
- 4.1 General requirements...11
- 4.2 Downhill test...11
- 4.3 Traction test...11
- 4.4 Drum test...11
- 5 Test conditions...12
- 5.1 Environment...12
- 5.2 Test site...12
- 5.3 Test vehicle preparation...12
- 6 Downhill test...14
- 6.1 General requirements...14
- 6.2 Test ramp...14
- 6.3 Standard test parameters...14
- 6.4 Adjustment of specific test parameters...15
- 6.5 Test specifications...19
- 6.6 Determination of results...20
- 7 Traction test...20
- 7.1 General requirements...20
- 7.2 Test roads...20
- 7.3 Standard test parameters...21
- 7.4 Adjustment of specific test parameters...21
- 7.5 Test requirements...21
- 7.6 Data processing and result determination...22
- 8 Drum test...24
- 8.1 General requirements...24
- 8.2 Test bench...24
- 8.3 Standard test parameters...25
- 8.4 Adjustment of specific test parameters...26
- 8.5 Test requirements...26
- 8.6 Data processing and determination of results...27
- Appendix A (Normative) Symbols and definitions...30
Foreword
This standard was drafted in accordance with the rules given in GB/T
1.1-2009.
This standard is compiled through redrafting method with reference to ISO
12161.2006 "Road vehicles - Endurance braking systems of motor vehicles
and towed vehicles - Test procedures". AND its consistency with ISO
12161.2006 is non-equivalent.
This standard was proposed by the Ministry of Industry and Information
Technology.
This standard shall be under the jurisdiction of the National Automotive
Standardization Technical Committee (SAC/TC 114).
The drafting organizations of this standard. China Automotive Technology
Research Center, China Heavy Vehicle Group Co., Ltd., Beiqi Foton
Automobile Co., Ltd., Shaanxi Fast Gear Co., Ltd., Jacobs (Suzhou) Vehicle
Control System Co., Ltd., Shenzhen TERCA technology Co., Ltd.
1 Scope
This standard specifies the performance test method for the endurance
braking system of commercial vehicles.
This standard applies to commercial vehicles equipped with endurance
braking systems.
2 Normative references
The following documents are essential to the application of this document. For
the dated documents, only the versions with the dates indicated are applicable
to this document; for the undated documents, only the latest version (including
all the amendments) are applicable to this Standard.
GB/T 5620 Road vehicles - Braking of automotive vehicles and their trailers
- Vocabulary
GB 12676-2014 Technical requirements and test methods for commercial
vehicle and trailer braking systems
3 Terms and definitions
The terms and definitions as defined in GB/T 5620 and GB12676-2014 as well
as the following terms and definitions apply to this document.
3.1
Endurance braking system
It refers to a supporting braking system which can provide and maintain
long-term braking performance without significant reduction of performance.
Note 1. "Endurance braking system" means the entire system including the
control unit. This definition does not include a power regenerative braking
system.
It refers to an energy conversion device that is independent of the service
brake or is supplemented to the service brake to provide an endurance
braking action for vehicle speed control.
3.1.2.1 Retarder classification
3.1.2.1.1
Primary retarder
It refers to the retarder installed in front of the powertrain transmission input
shaft (including the input shaft), the endurance braking power of which is
directly related to engine speed.
3.1.2.1.2
Secondary retarder
It refers to the retarder installed between the powertrain transmission input
shaft (including the input shaft) and the transmission shaft, the endurance
braking power of which is directly related to engine speed.
Note. The retarder associated with the non-drive shaft is also classified as a
rear retarder.
3.1.2.1.3
Other retarders
It refers to the retarder which does not comply with the classification in
3.1.2.1.1 or 3.1.2.1.2.
3.1.2.2 Retarder type
3.1.2.2.1
Combustion engine retarder
3.1.2.2.1.1
Engine braking
When the engine is connected to the drive wheel, the vehicle is slowed
down by making the engine dragging through reducing or stopping fuel
supply and air supply.
3.1.2.2.1.2
Note 1. The equivalent energy is calculated using the following equation,
wherein the horizontal distance is regarded as the ramp length/travel
distance (6 km).
Type II test. Wequ, II = Wdiss, II = m × g × 6000 × (0.06 - 0.01)
Type IIA test. Wequ, IIA = Wdiss, IIA = m × g × 6000 × (0.07 - 0.01)
4 Test method
4.1 General requirements
Based on the specific test conditions and measuring equipment, it may choose
any methods as listed in 4.2 ~ 4.4 to assess the vehicle endurance braking
performance.
4.2 Downhill test
...
......
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 30 pages — is available in the English PDF.
Referenced standards
How to Download GB/T 32692-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 12676-2014 — Road vehicle -- Braking systems -- Structure, performance and test methods
GB/T 5620-2020 — Road vehicles - Vocabulary and definition for braking of automotive vehicles and their trailers
GB/T 47119-2026 — Testing method for the thermal stability of organic heat transfer fluids - Gas chromatography with internal standard method
Secure payment via Stripe
Payments accepted
GB/T 32692-2016
$120.00