GB/T 32607-2016Textiles—Guide to control on quality safety factors (English PDF)
纺织品 质量安全因子控制指南
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 32607-2016 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
April 25, 2016
Implementation date
November 1, 2016
Scope
GB/T 32607-2016 is the English-translated version of 纺织品 质量安全因子控制指南.
GB/T 32607-2016 sets out the principles for controlling the quality safety factors of textiles, provides a method for identifying those factors across the whole manufacturing process of the product, and gives technical guidelines for controlling them at each stage of that process.
Clause 1 states that it applies to the quality and safety control of the various textile products used as consumer products.
Clause 3 defines textile products, citing GB 18401-2010, as products made from natural and chemical fibres as the main raw material by spinning, weaving, dyeing and similar processing or by sewing and compounding, such as yarns, fabrics and their finished articles; it defines products of consumer interest from GB 5296.1-2012, consumer product quality safety from GB/T 28216-2011 as quality that meets safety requirements under expected use and foreseeable misuse, and the consumer product quality safety factor as the inherent factor that can give rise to a quality and safety risk.
The introduction explains the approach: because consumers are particularly concerned about the potential hazards in a textile product that affect personal safety and health, the quality safety factors are to be identified and analysed throughout manufacturing, the factors that may harm human health and safety at each stage are to be determined systematically, and specific control methods are to be proposed, so that the standard serves as a technical guide for manufacturers on how to improve product safety in production.
Its normative references include GB 18401 on the basic safety technical specification for national textile products, GB 18383 on general technical requirements for fibre products, GB/T 18885 on technical requirements for eco-textiles, GB/T 20708 on the determination and limits of certain harmful substances in textile auxiliary products, GB/T 22282 on limits of toxic and hazardous substances in textile fibres, and GB 31701 on the safety technical code for infant and children textile products.
The standard was proposed by the China Textile Industry Federation and is administered by the National Textile Standardization Technical Committee (SAC/TC 209), the drafting organisations being the Textile Industry Standardization Institute, the Textile Industry Science and Technology Development Center and China Textile Standard (Beijing) Inspection and Certification Co., Ltd. It was issued on 25 April 2016 and has applied since 1 November 2016.
Found what you need?
Document preview — GB/T 32607-2016
National Standard of the People's Republic of China
- ICS
- 59.080.01
- Classification
- W 04
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- Introduction
- 1 Scope
- 2 Normative reference documents
- 3 Terms and definitions
Foreword
This standard is drafted in accordance with the rules given in GB/T 1.1-2009.
Introduction
When a textile product is used as a consumer product, consumers are particularly concerned about the potential hazards in the product that affect personal safety and health Prime In order to ensure that the textile products in the normal use and reasonable foreseeable misuse of the product quality and safety, the need for textile products manufacturing Each stage of its quality and safety factors for effective control, and ultimately achieve the purpose of product safety.
This standard takes the textile product quality and safety factor as the breakthrough point, in the whole process of textile product manufacturing quality safety factor to identify and Analysis, systematically determine the quality of textile products in various stages may be harmful to human health and safety factors, and put forward specific control Method to provide a technical guide to manufacturers on how to improve product safety in the production of textile products. Guide to Textiles Quality Safety Factor Control
1 Scope
This standard specifies the principles of textile quality and safety factor control, providing the identification method of quality safety factors throughout the product manufacturing process, and gives the technical guidelines for controlling quality safety factors at all stages.
This standard applies to the quality and safety control of various textile products used as consumer products.
2 Normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this document. For undated references, the latest edition (including all modifications) applies to this document.
GB 18383 General technical requirements for fiber products
GB 18401 Technical specification for basic safety of national textile products
GB/T 18885 Technical requirements for eco - textiles
Limits and determination of 23 harmful aromatic amines in dairy products
GB/T 20708 Textile additives products in the determination of some harmful substances and determination
Limit and determination of heavy metal elements in dye products
GB/T 22282 Limited amount of toxic and hazardous substances in textile fibers
Code for the design and production of children's clothing for improving mechanical safety GB/T
GB 31701 Technical code for safety of infant and children's textile products
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Textile products
To natural fiber and chemical fiber as the main raw material, by spinning, weaving, dyeing and other processing technology or by sewing, composite and other products made of products, Such as yarns, fabrics and their finished products. [GB 18401-2010, definition 3.1]
3.2 Consumer products
To meet the needs of members of the community and sales of products. [GB 5296.1-2012, definition 3.2]
3.3 <Consumer goods> quality and safety
The quality of consumer goods meets safety requirements in the event of expected use and foreseeable misuse. [GB/T 28216-2011, definition 2.10]
3.4 "Consumer goods" quality safety factor
The inherent factors that can lead to the quality and safety risks of consumer goods.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 18383General technical requirements for products with filling materials
- GB 18401National general safety technical code for textile products
- GB/T 18885Technical specifications of ecological textiles
- GB/T 20708Limit and determination of parts of harmful substances in textile dyeing and finishing auxiliaries
- GB/T 22282The limitation of toxic and hazardous substances in textile fibers
Similar standards
How to Download GB/T 32607-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 18383-2025 — General technical requirements for products with filling materials
GB 18401-2010 — National general safety technical code for textile products
GB/T 18885-2020 — Technical specifications of ecological textiles
Secure payment via Stripe
Payments accepted
GB/T 32607-2016
$135.00