Valid

GB/T 32076.6-2015High-strength structural bolting assemblies for preloading—Part 6: Plain chamfered washers (English PDF)

预载荷高强度栓接结构连接副第6部分：倒角平垫圈

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 32076.6-2015 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

October 9, 2015

Implementation date

June 1, 2016

Scope

GB/T 32076.6-2015 is the English-translated version of 预载荷高强度栓接结构连接副第6部分：倒角平垫圈.

GB/T 32076.6-2015 is the Chinese standard "High-strength structural bolting assemblies for preloading—Part 6: Plain chamfered washers".

Its scope clause reads: This part of GB GB/T 32076 of/T 32076.1 defines specifications for 12mm ~ 36mm, large hexagonal series of high-strength preloading Bolts and nuts with a quenched and tempered deputy chamfered flat washer.

NOTE. In order to obtain satisfactory results, ensure the correct use of the gasket is very important. The method used correctly, consult or refer to the relevant specification.

This section applies to industrial and civil construction, bridge, tower mast structure, boiler steel structure, lifting machinery and other steel structures preload connection The high strength bolts.

Appendix A gives a description of the European steel bolting two types of applications. Its clauses include dimensions.

Found what you need?

Document preview — GB/T 32076.6-2015

National Standard of the People's Republic of China

ICS: 21.060.30
Classification: J 13

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Foreword
1 Scope
2 Normative references
3 Terms and definitions

1 Scope

This part of GB GB/T 32076 of/T 32076.1 defines specifications for 12mm ~ 36mm, large hexagonal series of high-strength preloading

Bolts and nuts with a quenched and tempered deputy chamfered flat washer.

NOTE. In order to obtain satisfactory results, ensure the correct use of the gasket is very important. The method used correctly, consult or refer to the relevant specification.

This section applies to industrial and civil construction, bridge, tower mast structure, boiler steel structure, lifting machinery and other steel structures preload connection

The high strength bolts.

Appendix A gives a description of the European steel bolting two types of applications.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 90.1 Fasteners acceptance inspection

GB/T 90.2 Fasteners marking and packaging

GB/T 1237 marking method fasteners

GB/T 3103.3 Tolerances for fasteners flat washer

GB/T 3104 Fasteners Hexagon width across products

GB/T 5267.2 fasteners non-electrolytic zinc flake coating

GB/T 5267.3 Fasteners hot dip galvanized coatings

GB/T 32076.1 preload of high strength bolted connection structure Vice - Part 1. General requirements

3 Dimensions

Type washer dimensions shown in Figure 1 and Table 1.

Figure 1 Dimensions […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Cited by

Similar standards

GB/T 859-2025|GB/T 93-2025|GB/T 32076.11-2024|GB/T 896-2020|GB/T 893-2017|GB/T 894-2017

How to Download GB/T 32076.6-2015

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.