GB/T 31332-2014Vulcanizing accelerator—N-cyclohexylbenzothiazole-2-sulfenamide (CBS) (English PDF)
硫化促进剂 N-环己基-2-苯并噻唑次磺酰胺(CBS)
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 31332-2014 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 5, 2014
Implementation date
June 1, 2015
Scope
GB/T 31332-2014 is the English-translated version of 硫化促进剂 N-环己基-2-苯并噻唑次磺酰胺(CBS).
GB/T 31332-2014 is the Chinese standard "Vulcanizing accelerator -- N-cyclohexylbenzothiazole-2-sulfenamide (CBS)".
Its scope clause reads: This Standard specifies the requirements, test methods, inspection rules, marking, packaging, transportation, and storage of vulcanizing accelerator N- cyclohexylbenzothiazole-2-sulfenamide (referred to as vulcanizing accelerator CBS).
This Standard is applicable to the vulcanizing accelerator CBS prepared by using vulcanizing accelerator 2-mercaptobenzothiazole (referred to as vulcanizing accelerator MBT) and cyclohexylamine as main raw materials.
Molecular formula: C13H16N2S2 Structural formula: Relative molecular mass: 264.39 (according to 2012 International relative atomic mass) CAS RN: 95-33-0. Its clauses include requirements; test methods; inspection rules; marking, packaging, transportation, and storage.
It was issued by the General Administration of Quality Supervision, Inspection and Quarantine on DECEMBER 05, 2014 and took effect on JUNE 01, 2015.
Found what you need?
Document preview — GB/T 31332-2014
National Standard of the People's Republic of China
- ICS
- 71.100.40
- Classification
- G 71
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword3
- 1 Scope4
- 2 Normative references4
- 3 Requirements5
- 4 Test methods5
- 5 Inspection rules7
- 6 Marking, packaging, transportation, and storage8
1 Scope
This Standard specifies the requirements, test methods, inspection rules, marking, packaging, transportation, and storage of vulcanizing accelerator N- cyclohexylbenzothiazole-2-sulfenamide (referred to as vulcanizing accelerator CBS).
This Standard is applicable to the vulcanizing accelerator CBS prepared by using vulcanizing accelerator 2-mercaptobenzothiazole (referred to as vulcanizing accelerator MBT) and cyclohexylamine as main raw materials. Molecular formula: C13H16N2S2 Structural formula:
Relative molecular mass: 264.39 (according to 2012 International relative atomic mass) CAS RN: 95-33-0
2 Normative references
The following documents are indispensable for the application of this document.
For the dated references, only the editions with the dates indicated are applicable to this document. For the undated references, the latest edition (including all the amendments) are applicable to this document.
GB/T 191-2008 Packaging - Pictorial Marking for Handling of Goods
GB/T 601-2002 Chemical reagent - Preparations of reference titration solutions
GB/T 603-2002 Chemical reagent - Preparations of reagent solutions for use in test methods The expression and rounding off rules of the test data in this Standard shall comply with the relevant provisions of the 4.3.3 rounded-off value comparison method in GB/T 8170-2008.
4 Test methods
4.2 Appearance
Visual inspection under natural light.
4.3 Determination of initial melting point
It shall be determined according to the provisions of 3.1 of GB/T 11409-2008.
4.4 Determination of heating loss
It shall be determined according to the provisions of 3.4 of GB/T 11409-2008.
The sample weighing amount is about 2 g (accurate to 0.0001 g). The temperature of electrothermal constant-temperature drying oven is controlled at (70±2)°C. The heating time is 3 h. The difference between the results of two parallel determinations shall not exceed 0.04%. The arithmetic mean of the results of two parallel determinations shall be taken as the determination result.
4.5 Determination of ash
It shall be determined according to the provisions of 3.7 of GB/T 11409-2008.
The sample weighing amount is about 3 g (accurate to 0.0001 g). The temperature of high-temperature furnace is controlled at (750±25)°C. The difference between the results of two parallel determinations shall not exceed 0.04%. The arithmetic mean of the results of two parallel determinations shall be taken as the determination result.
4.6 Determination of sieve residue
It shall be determined according to the provisions of 3.5.2 of GB/T 11409-2008.
The difference between the results of two parallel determinations shall not exceed 0.02%. The arithmetic mean of the results of two parallel determinations shall be taken as the determination result.
4.7 Determination of methanol insolubles
It shall be determined according to the provisions of 5.5 of GB/T 21184-2007.
The difference between the results of two parallel determinations shall not exceed 0.05%. The arithmetic mean of the results of two parallel determinations shall be taken as the determination result.
4.8 Determination of purity and free amine
4.8.1 Determination of purity and free amine (titration method)
5 Inspection rules
5.5 Re-inspection
If one item of the exit-factory inspection results does not meet the requirements of this Standard, from twice the package of the same lot of products, re-sampling shall be carried out for re-inspection. Even if only one of the indexes in the re-inspection results does not meet the requirements of this Standard, the lot of products is judged as unqualified products.
6 Marking, packaging, transportation, and storage
6.1 Marking
The vulcanizing accelerator CBS shall have a clear and firm mark on the outer packaging. Its content shall include product name, standard number, manufacturer name, address, production date, lot number, trademark, net quantity, etc. According to the provisions of GB/T 191-2008, MARK the signs such as "avoid sun" and "avoid rain".
6.2 Packaging
The vulcanizing accelerator CBS is packaged using a woven bag lined with plastic bag or a paper-plastic compound bag. The net quantity of each bag is 25 kg. Special packaging shall be in accordance with user requirements.
6.3 Transportation
The vulcanizing accelerator CBS, when transported, shall be protected from rain and sun; when handling, lightly loaded and unloaded to prevent impact.
6.4 Storage
The vulcanizing accelerator CBS shall be stored in a clean, dry, well-ventilated warehouse. It shall avoid direct sunlight. The distance from the wall shall be greater than 0.5 m. It shall not be close to the water pipes, sewers, and heating devices, to prevent moisture and deterioration. It shall not be close to the fire source.
The vulcanizing accelerator CBS, under the transportation and storage conditions in accordance with the provisions of this Standard, from the date of production, shall have a storage period of 6 months. […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 31332-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 191-2008 — Packaging - Pictorial marking for handling of goods
GB/T 601-2002 — Chemical reagent - Preparations of standard volumetric solutions
GB/T 603-2002 — Chemical reagent - Preparations of reagent solutions for use in test methods
GB/T 31332-2014
$75.00