Valid

GB/T 31230.1-2014Industrial ethernet fieldbus EtherCAT—Part 1: Overview (English PDF)

工业以太网现场总线EtherCAT 第1部分:概述

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 31230.1-2014 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

September 30, 2014

Implementation date

April 1, 2015

Scope

GB/T 31230.1-2014 is the English-translated version of 工业以太网现场总线EtherCAT 第1部分:概述.

GB/T 31230.1-2014 gives the overview of and the guidance to GB/T 31230: it describes the structure and content of GB/T 31230, relates that structure to the OSI Basic Reference Model of GB/T 9387, and shows the logical structure of GB/T 31230.

Clause 1 also states that this part depends on the corresponding part of Type 12 of the IEC 61158 series of standards, and no exclusion is stated.

The contents run from the scope, normative references and abbreviations to clause 4 on the EtherCAT concept, clause 5 on the mapping to the OSI Basic Reference Model and clause 6 on the overviews of the physical layer, data link layer and application layer services and protocol features, closing with clause 7 on the data type ASE and the definition of data types in object form.

The part also carries a figure of a general fieldbus network, a conceptual diagram of DL and AL services and protocols, a figure of the fieldbus basic reference model, and a table relating the OSI layers to EtherCAT.

Clause 2 cites GB/T 9387 (all parts), and clause 3 lists the abbreviations AL, AR, AREP, DL-, DLL, IETF, IP, (N)-layer, OSI, Ph- and PhL, based in part on the concepts of GB/T 9387.1.

Clause 4 opens by describing the fieldbus conceptually as a digital communications network that integrates industrial control and instrumentation equipment into a system, with transmitters, sensors, actuators and controllers as typical devices, and the draft breaks off there.

The foreword states that GB/T 31230 is divided into six parts: this general part, the physical layer service and protocol specification, the data link layer service definition, the data link layer protocol specification, the application layer service definition and the application layer protocol specification.

The part was proposed by the China Machinery Industry Federation and is administered by the national standardization technical committee for industrial process measurement and control (SAC/TC124); the page places it at ICS 25.040 and Chinese classification N10. It was issued on 30 September 2014 and has applied since 1 April 2015.

Found what you need?

Document preview — GB/T 31230.1-2014

National Standard of the People's Republic of China

ICS
25.040
Classification
N 10

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Preface
  • 1 Scope
  • 2 Normative references
  • 3 Abbreviations
  • 4 EtherCAT concept
  • 5.1 Overview
  • 6.1 Physical layer services and protocols Features Overview
  • 6.2 Data link layer service Features Overview
  • 6.3 Overview of the data link layer protocol features
  • 6.4 Application Layer 4 Service Features Overview
  • 6.5 application layer protocol features overview
  • 7 Data Type ASE

Foreword

GB/T 31230 "Industrial Ethernet fieldbus EtherCAT" is divided into six sections.

--- Part 1. General;

--- Part 2. Physical layer service and protocol specification;

--- Part 3. Data link layer service definition;

--- Part 4. Data link layer protocol specification;

--- Part 5. Application layer service definition;

--- Part 6. Application layer protocol specification.

This section GB/T Part of 131,230.

This section drafted in accordance with GB/T 1.1-2009 given rules.

1 Scope

1.1 Relations section and IEC standards

GB/T 31230 in this section depends on the IEC 61158 series of standards Type 12 in the corresponding section.

1.2 Overview

The following section describes the contents of GB/T 31230 Overview and guidance.

--- Description GB/T 31230 structure and content;

--- Related GB/T 31230 Structure and GB/T 9387OSI Basic Reference Model;

--- Show the logical structure of GB/T 31230 of.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 9387 (all parts), Information technology - Open Systems Interconnection - Basic Reference Model

3 Abbreviations

The following abbreviations apply to this document, based in part on GB/T 9387.1 concept.

AL. Application Layer (N = 7) [Applicationlayer (N = 7)]

AR. Application relationship (Applicationrelationship)

AREP. Application relationship endpoint (Applicationrelationshipendpoint)

DL-. data link layer (as a prefix) [Data-linklayer (asaprefix)]

DLL. data link layer (N = 2) [Data-linklayer (N = 2)]

IETF. Internet Engineering Task Force (InternetEngineeringTaskForce)

IP. Internet protocol (see RFC791) [InternetProtocol (seeRFC791)]

(N) -layer. OSI Basic Reference Model of the n-layer (LayernoftheOSIBasicReferenceModel)

OSI. OSI (Opensystemsinterconnection)

Ph-. physical layer (as a prefix) [Physicallayer (asaprefix)]

PhL. physical layer (N = 1) [Physicallayer (N = 1)]

4 EtherCAT concept

Conceptually, the field bus is a digital communications network for industrial control and instrumentation equipment integrated into a system. typical Transmitter equipment, sensors, actuators and controllers.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

GB/T 9387

Similar standards

How to Download GB/T 31230.1-2014

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 31230.1-2014

$115.00