GB/T 30839.48-2018Energy consumption grading for electroheat installations—Part 48: Aluminum annealing furnace (English PDF)

Foreword

GB/T 30839 "Industrial electric heating device energy grading" is divided into the following parts.

--- Part 1. General part;

--- Part 2. Three steelmaking electric arc furnaces;

--- Part 21. ladle refining furnace;

--- Part 31. Intermediate frequency centerless induction furnace;

--- Part 32. Voltage type frequency conversion multiple intermediate frequency centerless induction furnace complete sets;

---Part 33. Power frequency centerless induction furnace;

--- Part 34. Power frequency induction furnace;

--- Part 4. Indirect resistance furnace;

--- Part 41. Push-type resistance heating unit;

--- Part 42. Well resistance furnace;

--- Part 43. Box-type resistance furnace;

--- Part 44. Trolley-type resistance furnace;

--- Part 45. Box quenching resistance furnace;

---Part 46. Single crystal furnace;

--- Part 47. Electric bath furnace;

--- Part 48. Aluminum annealing furnace.

This part is part 48 of GB/T 30839.

This part is drafted in accordance with the rules given in GB/T 1.1-2009.

1 Scope

This part of GB/T 30839 specifies the general requirements for the energy consumption of aluminum annealing furnaces, including the standard body for energy consumption of aluminum annealing furnaces.

Department, energy consumption parameters, energy consumption range, energy consumption parameter classification, index formulation and measurement methods.

This section applies to industrial enterprises for aluminum sheet, aluminum foil, aluminum strip, aluminum wire and other aluminum annealing.

This part can be used for aluminum annealing furnace manufacturers, aluminum annealing furnace users in industrial production, and related testing and arbitration institutions, assessment and evaluation.

The energy consumption level of aluminum annealing furnace products and the energy consumption status during actual use to promote the improvement of the manufacturing process of aluminum annealing furnace The purpose of energy saving and consumption reduction.

This section can be used to develop a standard reference for energy consumption in the production process of aluminum annealing furnaces.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 10066.1-2004 Test methods for electric heating equipment - Part 1. General part

GB/T 10066.4-2004 Test methods for electric heating equipment - Part 4. Indirect resistance furnace

GB/T 13324-2006 Heat treatment equipment terminology

GB/T 30839.1-2014 Energy consumption of industrial electric heating devices - Part 1. General requirements

GB/T 30839.4-2014 Energy consumption of industrial electric heating devices - Part 4. Indirect resistance furnace

3 Terms and definitions

GB/T 30839.1-2014, GB/T 30839.4-2014, GB/T 13324-2006 and the following terms and definitions apply In this document.