GB/T 30562-2014Solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys (English PDF)

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules.

This standard uses redrafted law revision of international standards ISO 24034:2010 "welding titanium and titanium alloy material with a solid fusion welding Wire and wire filling procedures "(in English).

This standard with ISO 24034. main technical differences and their reasons for 2010 are as follows.

--- Delete references to normative documents referenced international standards ISO 80000-1:2009;

--- Remove the normative references to international standards ISO 544 and file referenced in ISO 14344, our country has a direct reference to the corresponding conversion Domestic standards;

--- Appendix B of American Standard to its valid version AWSA5.16/A5.16M.2013. Japanese standard wire models Press JISZ3331:2011 has been adjusted.

This standard and ISO 24034:2010 as compared to, for ease of use, the structure changes as follows.

--- By the models, technical requirements, test methods, inspection rules, packaging, marking and quality certification be written.

This standard also made the following editorial changes.

--- The "this International Standard" by "this standard";

--- Deleted international standards foreword;

--- Standard name changed to "titanium and titanium alloy wire." this standard by the National Standardization Technical Committee welded (SAC/TC55) and focal points.

This standard was drafted. Changzhou Huatong Welding Industry Co., Ltd., Jiangsu Jiang Wire Co., Ltd., Harbin Welding Research Institute, Beijing, Kunshan Group Welding Technology Co., Ltd., Shandong Yue Fei Welding Industry Co., Ltd., Tianjin Bridge Welding Materials Group Co., Ltd.

Drafters of this standard. Following Chu Jun, Li Zhenhua, Ji Wen Bin, Zheng Iloilo, Chen Mo, Feng Jidong, Cui, Yang Zaijia.

Titanium and titanium alloy wire

1 Scope

This standard specifies the titanium and titanium alloy solid wires and filler wire models, technical requirements, test methods, inspection rules, packaging, marking and Quality certificate.

This standard applies to metal inert gas shielded arc welding (MIG), tungsten inert gas shielded arc welding (TIG), plasma arc welding and Laser welding and other welding titanium and titanium alloy solid wires and filler wire (hereinafter referred to as wire).

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 25775 Technical delivery conditions for welding material product type, dimensions, tolerances and marking (GB/T 25775-2010, ISO 544:2003, MOD) GB/T 25778 welding materials procurement guidelines (GB/T 25778-2010, ISO 14344:2010, MOD)

3 Models