Valid

GB/T 29910.2-2013Industrial communication networks -- Fieldbus specifications -- Type 20 HART specification -- Part 2: HART wired network data link layer service definition and protocol specification (English PDF)

工业通信网络 现场总线规范 类型20:HART规范 第2部分:HART有线网络数据链路层服务定义和协议规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (35 pages)

Need quotation for your management?

Get a formal quotation for GB/T 29910.2-2013 in 30 minutes.

Issued by

Standardization Administration of China

Level / Type

National · Recommended

Issue date

December 17, 2013

Implementation date

May 1, 2014

Scope

GB/T 29910.2-2013 is the English-translated version of 工业通信网络 现场总线规范 类型20:HART规范 第2部分:HART有线网络数据链路层服务定义和协议规范.

GB/T 29910.2-2013 — This section GB/T 29910 requirements IEC 61158 Fieldbus type 20 (HART) Data link layer service definition and protocol compliance Fan, the OSI Basic Reference Model (GB/T 9387.1) consistent.

This section defines the data for the timely transmission of wired HART protocol and Fieldbus control procedures and structures DLPDU of information, and in an abstract manner defines the data link layer services externally visible.

Message Communications This section covers the basic automation environment, "the stringent requirements of time (time-critical)" between devices.

Found what you need?

Document preview — GB/T 29910.2-2013

National Standard of the People's Republic of China

ICS
25.040
Classification
N 10

Issued by: Standardization Administration of China

Contents

  • Introduction
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions, symbols, abbreviations, conventions
  • Terms and Definitions 3.1 Reference Model
  • 3.2 Specific terms and definitions
  • 3.3 Acronyms

Foreword

GB/T 29910 "Industrial communication networks - Fieldbus specifications - Type 20. HART specification" is divided into the following six sections.

--- Part 1. HART wired network physical layer service definition and protocol specification;

Part --- Article 2. HART wired network data link layer service definition and protocol specification;

--- Part 3. Application layer service definition;

--- Part 4. Application layer protocol specification;

Part --- Article 5. WirelessHART wireless communication network and communication profile;

--- Part 6. Application layer protocol specification definitions and additional services.

This is Part 2 GB/T 29910 of.

This section drafted in accordance with GB/T 1.1-2009 given rules.

The partial modification of the use of HART Communication Foundation (HCF) technical documentation HCF_SPEC-710 "Industrial communication networks through wired Letter Network HART. HARTFSK, DLL and APL supplemental "data link layer service definition and protocol specification, the technical content and Original English document there is no difference in the structure of the text layout appropriately adjusted.

This part is proposed by China Machinery Industry Federation.

This part of the measurement and control of Standardization Technical Committee (SAC/TC124) is administered by the National industrial processes.

This section is drafted. Machinery Industrial Instrumentation Technology and Economy Institute, HART Communication Foundation, Chinese Academy of Sciences since Automation Research Institute, Shanghai Automation Instrumentation Co., Southwest University, Shanghai Institute of Industrial Automation Instrumentation, Systems Engineering Beijing and Belgium Cheng Co., Ltd., Beijing Science and Technology Co., Austin, Fujian on the Run Precision Instrument Co., Ltd., China Instrument Industry Association, Shanghai Han was heavenly networking Technology Co., Ltd., Chongqing Institute of Industrial Automation Instrumentation, double Group (Deyang) Heavy Equipment Co., Ltd.

1 Scope

This section GB/T 29910 requirements IEC 61158 Fieldbus type 20 (HART) Data link layer service definition and protocol compliance Fan, the OSI Basic Reference Model (GB/T 9387.1) consistent. This section defines the data for the timely transmission of wired HART protocol and Fieldbus control procedures and structures DLPDU of information, and in an abstract manner defines the data link layer services externally visible.

Message Communications This section covers the basic automation environment, "the stringent requirements of time (time-critical)" between devices.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 9387.1 Information technology - Open Systems Interconnection - Basic Reference Model - Part 1. Basic model (GB/T 9387.1-1998ISO /IEC 7498-1:1994, IDT) GB/T 17967 Information technology - Open Systems Interconnection - Basic Reference Model OSI service definition conventions (GB/T 17967-2000ISO /IEC 10731:1994, IDT) GB/T 29910.1-2013 Industrial communication networks - Fieldbus specifications - Type 20. HART specification - Part 1. HART Wired network physical layer service definition and protocol specification GB/T 29910.6-2013 Industrial communication networks - Fieldbus specifications - Type 20. HART specification - Part 6. Application layer Additional service definition and protocol specification

3 Terms and definitions, symbols, abbreviations, conventions

Terms and Definitions 3.1 Reference Model this section GB/T 9387.1 based on the concept, and uses the following terms defined therein.

DL-entity (N = 2) DL Entity (N = 2) [GB/T 9387.1] DLprotocol-data-unit DL protocol data units [GB/T 9387.1] DLservice-data-unit DL service data units [GB/T 9387.1] DLSuser-data DLS user data [GB/T 9387.1] PhL-entity (N = 1) PhL entity (N = 1) [GB/T 9387.1] PhLprotocol-data-unit PhL PDU [GB/T 9387.1] PhLservice-data-unit PhL service data units [GB/T 9387.1] PhSuser-data PhS user data [GB/T 9387.1]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 35 pages — is available in the English PDF.

Referenced standards

How to Download GB/T 29910.2-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
35 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 29910.2-2013

$645.00