Valid

GB/T 2951.411-2026Electric and optical fibre cables - Test methods for non-metallic materials - Part 411: Miscellaneous tests - Low temperature brittleness of filling compounds (English PDF)

电缆和光缆 非金属材料试验方法 第411部分:综合试验 填充膏低温脆性

Preview PDF

This is a limited preview

Buy now to download the full PDF

Need quotation for your management?

Get a formal quotation for GB/T 2951.411-2026 in 30 minutes.

Issued by

State Administration for Market Regulation; Standardization Administration of China

Level / Type

National · Recommended

Issue date

October 30, 2026

Implementation date

May 1, 2027

Scope

GB/T 2951.411-2026 is the English-translated version of 电缆和光缆 非金属材料试验方法 第411部分:综合试验 填充膏低温脆性.

GB/T 2951.411-2026 is the Chinese national standard "Electric and optical fibre cables - Test methods for non-metallic materials - Part 411: Miscellaneous tests - Low temperature brittleness of filling compounds".

It was issued on October 30, 2026 by the State Administration for Market Regulation and the Standardization Administration of China, and takes effect on May 1, 2027. It is a current standard.

Found what you need?

Document preview — GB/T 2951.411-2026

National Standard of the People's Republic of China

Issued by: State Administration for Market Regulation; Standardization Administration of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative References
  • 2.1 Terms
  • 2.2 Symbols
  • 3 Terms and Definitions

1 Foreword

GB/T 2951.411-2026 was issued by State Administration for Market Regulation; Standardization Administration of China on 30 October 2026 and takes effect on 1 May 2027.

It is one of 86 parts of the GB/T 2951 series.

The GB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

GB/T 2951.411-2026 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 76,457 other GB/T standards.

Of the 47,415 GB/T standards that do carry an ICS number, 3,437 (7%) fall under ICS 77, in the field of metallurgy.

3 About this standard

Issued by: State Administration for Market Regulation; Standardization Administration of China

4 Related standards

Other parts of this standard:

GB/T 2951.1-1994 — Test method for determining mechanical and physical properties of electric cables and wires. General

GB/T 2951.1-1997 — Common test methods for insulating and sheathing materials of electric cables. Part 1: Methods for general application. Section one: Measurement of thickness and overall dimensions--Tests for determining the mechanical properties

GB/T 2951.2-1994 — Test method for determining mechanical and physical properties of electric cables and wires. Determination of insulation thicknesses

GB/T 2951.2-1997 — Common test methods for insulating and sheating materials of electric cables. Part 1: Methods for general application. Section two: Thermal ageing methods

GB/T 2951.3-1994 — Test method for determining mechanical and physical properties of electric cables and wires. Determination of sheathing thicknesses

GB/T 2951.3-1997 — Common test methods for insulating and sheathing materials of electric cables. Part 1: Methods for general application. Section three: Methods for determining the density--Water absorption tests--Shrinkage test

GB/T 2951.4-1994 — Test method for determining mechanical and physical properties of electric cables and wires. Determination of diameters

GB/T 2951.4-1997 — Common test methods for insulating and sheating material of electric cables. Part 1: Methods for general application. Section four: Test at low temperature

GB/T 2951.5-1994 — Test method for determining mechanical and physical properties of electric cables and wires. Test for determining mechanical properties of insulation compounds

GB/T 2951.5-1997 — Common test methods for insulating and sheathing materials of electric cables. Part 2: Methods specific to elastomeric compounds. Section one: Ozone resistance test--Hot set test--Mineral oil immersion test

GB/T 2951.6-1994 — Test method for determining mechanical and physical properties of electric cables and wires. Test for determining mechanical properties of sheathing compounds

GB/T 2951.6-1997 — Common test methods for insulating and sheathing materials of electric cables. Part 3: Methods specific to PVC compounds. Section one: Pressure test at high temperature--Test for resistance to cracking

GB/T 2951.7-1994 — Test method for determining mechanical and physical properties of electric cables and wires. Test for thermal ageing in air oven

GB/T 2951.7-1997 — Common test methods for insulating and sheathing materials of electric cables. Part 3: Methods specific to PVC compounds. Section two: Loss of mass test--Thermal stability test

GB/T 2951.8-1994 — Test method for determining mechanical and physical properties of electric cables and wires. Test for ageing in an air bomb

GB/T 2951.8-1997 — Common test methods for insulating and sheathing materials of electric cables. Part 4: Methods specific to polyethylene and polypropylene compounds. Section one: Resistance to environmental stress cracking--Wrapping test after thermal ageing i

GB/T 2951.9-1994 — Test method for determining mechanical and physical properties of electric cables and wires. Test for ageing in an oxygen bomb

GB/T 2951.9-1997 — Common test methods for insulating and sheathing materials of electric cables. Part 4: Methods specific to polyethylene and polypropylene compounds. Section two: Elongation at break after pre-conditioning--Wrapping test after pre-conditioning-

GB/T 2951.10-1994 — Test method for determining mechanical and physical properties of electric cables and wires. Test for determining loss of mass for P. V. C. insulations

GB/T 2951.10-1997 — Common test methods for insulating and sheathing materials of electric cables. Part 5: Methods specific to filling compounds. Section one: Drop-point--Separation of oil--Lower temperature brittleness--Total acid number--Absence of corrosive co

GB/T 2951.11-1994 — Test method for determining mechanical and physical properties of electric cables and wires. Test for determining loss of mass for P. V. C. sheaths

GB/T 2951.11-2008 — Common test methods for insulating and sheathing materials of electric and optical cables -- Part 11: Methods for general application -- Measurement of thickness and overall dimensions -- Tests for determining the mechanical properties

GB/T 2951.12-1994 — Test method for determining mechanical and physical properties of electric cables and wires. Test for bending at low temperature

GB/T 2951.12-2008 — Common test methods for insulating and sheathing materials of electric and optical cables -- Part 12: Methods for general application -- Thermal ageing methods

GB/T 2951.13-1994 — Test method for determining mechanical and physical properties of electric cables and wires. Test for elongation at low temperature

GB/T 2951.13-2008 — Common test methods for insulating and sheathing materials of electric and optical cables -- Part 13: Methods for general application -- Measurement for determining the density -- Water absorption tests -- Shrinkage test

GB/T 2951.14-1994 — Test method for determining mechanical and physical properties of electric cables and wires. Test for impact at low temperature

GB/T 2951.14-2008 — Common test methods for insulating and sheathing materials of electric and optical cables -- Part 14: Methods for general application -- Test at low temperature

GB/T 2951.21-1994 — Test method for determining mechanical and physical properties of electric cables and wires. Flexing test for flexible cables and wires

GB/T 2951.21-2008 — Common test methods for insulating and sheathing materials of electric and optical cables -- Part 21: Methods specific to elastomeric compounds -- Ozone resistance, hot set and mineral oil immersion tests

GB/T 2951.23-1994 — Test method for determining mechanical and physical properties of electric cables and wires. Bending test

GB/T 2951.24-1994 — Test method for determining mechanical and physical properties of electric cables and wires. Test for copper naphthenate content of protective coverings

GB/T 2951.25-1994 — Test method for determining mechanical and physical properties of electric cables and wires. Test for anaerobe-corrosion of protective coverings

GB/T 2951.26-1994 — Test method for determining mechanical and physical properties of electric cables and wires. Saline bath test

GB/T 2951.27-1994 — Test method for determining mechanical and physical properties of electric cables and wires. Corrosion spread test

GB/T 2951.28-1994 — Test method for determining mechanical and physical properties of electric cables and wires. Test for abrasion of extruded oversheaths

GB/T 2951.31-1994 — Test method for determining mechanical and physical properties of electric cables and wires. Test for resistance of P. V. C. insulations to cracking

GB/T 2951.31-2008 — Common test methods for insulating and sheathing materials of electric and optical cables -- Part 31: Methods specific to PVC compounds -- Pressure test at high temperature -- Test for resistance to cracking

GB/T 2951.32-1994 — Test method for determining mechanical and physical properties of electric cables and wires. Test for resistance of P. V. C. sheaths to cracking

GB/T 2951.32-2008 — Common test methods for insulating and sheathing materials of electric and optical cables -- Part 32: Methods specific to PVC compounds -- Loss of mass test -- Thermal stability test

GB/T 2951.34-1994 — Test method for determining mechanical and physical properties of electric cables and wires. Tear test

GB/T 2951.37-1994 — Test method for determining mechanical and physical properties of electric cables and wires. Test for oxidative inductive time

GB/T 2951.38-1986 — Termite test mothods for wires and cables

GB/T 2951.41-1994 — Test method for determining mechanical and physical properties of electric cables and wires. Measurement of the melt flow index

GB/T 2951.41-2008 — Common test methods for insulating and sheathing materials of electric and optical cables -- Part 41: Methods specific to polyethylene and polypropylene compounds -- Resistance to environmental stress cracking -- Measurement of the melt flow index -- Carb

GB/T 2951.42-1994 — Test method for determining mechanical and physical properties of electric cables and wires. Wrapping test after thermal ageing in air

GB/T 2951.42-2008 — Common test methods for insulating and sheathing materials of electric and optical cables -- Part 42: Methods specific to polyethylene and polypropylene compounds -- Tensile strength and elongation at break after conditioning at elevated temperature

GB/T 2951.51-2008 — Common test methods for insulating and sheathing materials of electric and optical cables -- Part 51: Methods specific to filling compounds -- Drop point -- Separation of oil -- Lower temperature brittleness -- Total acid number -- Absence of corrosive co

GB/T 2951.100-2026 — Part 100: General

GB/T 2951.201-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 201: General tests—Measurement of insulation thickness

GB/T 2951.202-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 202:General tests—Measurement of thickness of non-metallic sheath

GB/T 2951.203-2026 — Part 203: General tests - Measurement of overall dimensions

GB/T 2951.301-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 301: Electrical tests—Measurement of the permittivity at 23℃ of filling compounds

GB/T 2951.302-2026 — Test methods for non-metallic materials of electric and optical cables - Part 302: Electrical tests - Measurement of DC resistivity of filling compounds at 23 ℃ and 100 ℃

GB/T 2951.401-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 401: Miscellaneous tests—Thermal ageing methods—Ageing in an air oven

GB/T 2951.402-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 402:Miscellaneous tests—Water absorption tests

GB/T 2951.403-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 403: Miscellaneous tests—Ozone resistance test on cross-linked compounds

GB/T 2951.404-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 404: Miscellaneous tests—Mineral oil immersion tests for sheaths

GB/T 2951.405-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 405: Miscellaneous tests—Thermal stability test for PVC insulations and PVC sheaths

GB/T 2951.406-2026 — Test methods for non-metallic materials of electric and optical cables - Part 406: Miscellaneous tests - Resistance to stress cracking of polyethylene and polypropylene compounds

GB/T 2951.407-2026 — Test methods for non-metallic materials of electric and optical cables - Part 407: Miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compounds

GB/T 2951.408-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 408:Miscellaneous tests—Long-term stability test of polyethylene and polypropylene compounds

GB/T 2951.409-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 409:Miscellaneous tests—Loss of mass test for thermoplastic insulations and sheaths

GB/T 2951.410-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 410:Miscellaneous tests—Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors

GB/T 2951.412-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 412: Miscellaneous tests—Thermal ageing methods—Ageing in an air bomb

GB/T 2951.501-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 501:Mechanical tests—Tests for determining the mechanical properties of insulating and sheathing compounds

GB/T 2951.502-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 502: Mechanical tests—Shrinkage test for insulations

GB/T 2951.503-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 503: Mechanical tests—Shrinkage test for sheaths

GB/T 2951.504-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 504: Mechanical tests—Bending tests at low temperature for insulations and sheaths

GB/T 2951.505-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 505:Mechanical tests—Elongation at low temperature for insulations and sheaths

GB/T 2951.506-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 506: Mechanical tests—Impact test at low temperature for insulations and sheaths

GB/T 2951.507-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 507:Mechanical tests—Hot set test for cross-linked materials

GB/T 2951.508-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 508:Mechanical tests—Pressure test at high temperature for insulation and sheaths

GB/T 2951.509-2026 — Test methods for non-metallic materials of electric and optical cables - Part 509: Mechanical tests - Test for resistance of insulations and sheaths to cracking (heat shock test)

GB/T 2951.510-2026 — Test methods for non-metallic materials of electric and optical cables - Part 510: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after air oven ageing

GB/T 2951.511-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 511: Mechanical tests—Measurement of the melt flow index of polyethylene and polypropylene compounds

GB/T 2951.512-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 512: Mechanical tests—Methods specific to polyethylene and polypropylene compounds—Tensile strength and elongation at break after conditioning at elevated temperature

GB/T 2951.513-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 513:Mechanical tests—Methods specific to polyethylene and polypropylene compounds—Wrapping test after conditioning

GB/T 2951.601-2026 — Part 601: Physical tests - Measurement of drop point of filling compounds

GB/T 2951.602-2026 — Part 602: Physical tests - Oil separation of filling compounds

GB/T 2951.603-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 603:Physical tests—Measurement of total acid number of filling compounds

GB/T 2951.604-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 604:Physical tests—Measurement of absence of corrosive components in filling compounds

GB/T 2951.605-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 605: Physical tests—Measurement of carbon black and/or mineral filler in polyethylene compounds

GB/T 2951.606-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 606: Physical tests—Methods for determining the density

GB/T 2951.607-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 607: Physical tests—Test for the assessment of carbon black dispersion in polyethylene and polypropylene

5 Classification and status

Prefix GB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — all pages — is available in the English PDF.

How to Download GB/T 2951.411-2026

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 2951.411-2026

$255.00