GB/T 2951.302-2026Test methods for non-metallic materials of electric and optical cables - Part 302: Electrical tests - Measurement of DC resistivity of filling compounds at 23 ℃ and 100 ℃ (English PDF)
电缆和光缆 非金属材料试验方法 第302部分:电性能试验 填充膏在23 ℃ 时和100 ℃ 时的直流电阻率测量
This is a limited preview
Buy now to download the full PDF
Need quotation for your management?
Get a formal quotation for GB/T 2951.302-2026 in 30 minutes.
Issued by
State Administration for Market Regulation; Standardization Administration of China
Level / Type
National · Recommended
Issue date
October 30, 2026
Implementation date
May 1, 2027
Scope
GB/T 2951.302-2026 is the English-translated version of 电缆和光缆 非金属材料试验方法 第302部分:电性能试验 填充膏在23 ℃ 时和100 ℃ 时的直流电阻率测量.
GB/T 2951.302-2026 is the Chinese national standard "Test methods for non-metallic materials of electric and optical cables - Part 302: Electrical tests - Measurement of DC resistivity of filling compounds at 23 ℃ and 100 ℃".
It was issued on October 30, 2026 by the State Administration for Market Regulation and the Standardization Administration of China, and takes effect on May 1, 2027. It is a current standard.
Found what you need?
Document preview — GB/T 2951.302-2026
National Standard of the People's Republic of China
Issued by: State Administration for Market Regulation; Standardization Administration of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 2.1 Terms
- 2.2 Symbols
- 3 Terms and Definitions
1 Foreword
GB/T 2951.302-2026 was issued by State Administration for Market Regulation; Standardization Administration of China on 30 October 2026 and takes effect on 1 May 2027.
It is one of 86 parts of the GB/T 2951 series.
The GB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
GB/T 2951.302-2026 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 76,457 other GB/T standards.
Of the 47,415 GB/T standards that do carry an ICS number, 3,437 (7%) fall under ICS 77, in the field of metallurgy.
3 About this standard
Issued by: State Administration for Market Regulation; Standardization Administration of China
4 Related standards
Other parts of this standard:
GB/T 2951.1-1994 — Test method for determining mechanical and physical properties of electric cables and wires. General
GB/T 2951.1-1997 — Common test methods for insulating and sheathing materials of electric cables. Part 1: Methods for general application. Section one: Measurement of thickness and overall dimensions--Tests for determining the mechanical properties
GB/T 2951.2-1994 — Test method for determining mechanical and physical properties of electric cables and wires. Determination of insulation thicknesses
GB/T 2951.2-1997 — Common test methods for insulating and sheating materials of electric cables. Part 1: Methods for general application. Section two: Thermal ageing methods
GB/T 2951.3-1994 — Test method for determining mechanical and physical properties of electric cables and wires. Determination of sheathing thicknesses
GB/T 2951.3-1997 — Common test methods for insulating and sheathing materials of electric cables. Part 1: Methods for general application. Section three: Methods for determining the density--Water absorption tests--Shrinkage test
GB/T 2951.4-1994 — Test method for determining mechanical and physical properties of electric cables and wires. Determination of diameters
GB/T 2951.4-1997 — Common test methods for insulating and sheating material of electric cables. Part 1: Methods for general application. Section four: Test at low temperature
GB/T 2951.5-1994 — Test method for determining mechanical and physical properties of electric cables and wires. Test for determining mechanical properties of insulation compounds
GB/T 2951.5-1997 — Common test methods for insulating and sheathing materials of electric cables. Part 2: Methods specific to elastomeric compounds. Section one: Ozone resistance test--Hot set test--Mineral oil immersion test
GB/T 2951.6-1994 — Test method for determining mechanical and physical properties of electric cables and wires. Test for determining mechanical properties of sheathing compounds
GB/T 2951.6-1997 — Common test methods for insulating and sheathing materials of electric cables. Part 3: Methods specific to PVC compounds. Section one: Pressure test at high temperature--Test for resistance to cracking
GB/T 2951.7-1994 — Test method for determining mechanical and physical properties of electric cables and wires. Test for thermal ageing in air oven
GB/T 2951.7-1997 — Common test methods for insulating and sheathing materials of electric cables. Part 3: Methods specific to PVC compounds. Section two: Loss of mass test--Thermal stability test
GB/T 2951.8-1994 — Test method for determining mechanical and physical properties of electric cables and wires. Test for ageing in an air bomb
GB/T 2951.8-1997 — Common test methods for insulating and sheathing materials of electric cables. Part 4: Methods specific to polyethylene and polypropylene compounds. Section one: Resistance to environmental stress cracking--Wrapping test after thermal ageing i
GB/T 2951.9-1994 — Test method for determining mechanical and physical properties of electric cables and wires. Test for ageing in an oxygen bomb
GB/T 2951.9-1997 — Common test methods for insulating and sheathing materials of electric cables. Part 4: Methods specific to polyethylene and polypropylene compounds. Section two: Elongation at break after pre-conditioning--Wrapping test after pre-conditioning-
GB/T 2951.10-1994 — Test method for determining mechanical and physical properties of electric cables and wires. Test for determining loss of mass for P. V. C. insulations
GB/T 2951.10-1997 — Common test methods for insulating and sheathing materials of electric cables. Part 5: Methods specific to filling compounds. Section one: Drop-point--Separation of oil--Lower temperature brittleness--Total acid number--Absence of corrosive co
GB/T 2951.11-1994 — Test method for determining mechanical and physical properties of electric cables and wires. Test for determining loss of mass for P. V. C. sheaths
GB/T 2951.11-2008 — Common test methods for insulating and sheathing materials of electric and optical cables -- Part 11: Methods for general application -- Measurement of thickness and overall dimensions -- Tests for determining the mechanical properties
GB/T 2951.12-1994 — Test method for determining mechanical and physical properties of electric cables and wires. Test for bending at low temperature
GB/T 2951.12-2008 — Common test methods for insulating and sheathing materials of electric and optical cables -- Part 12: Methods for general application -- Thermal ageing methods
GB/T 2951.13-1994 — Test method for determining mechanical and physical properties of electric cables and wires. Test for elongation at low temperature
GB/T 2951.13-2008 — Common test methods for insulating and sheathing materials of electric and optical cables -- Part 13: Methods for general application -- Measurement for determining the density -- Water absorption tests -- Shrinkage test
GB/T 2951.14-1994 — Test method for determining mechanical and physical properties of electric cables and wires. Test for impact at low temperature
GB/T 2951.14-2008 — Common test methods for insulating and sheathing materials of electric and optical cables -- Part 14: Methods for general application -- Test at low temperature
GB/T 2951.21-1994 — Test method for determining mechanical and physical properties of electric cables and wires. Flexing test for flexible cables and wires
GB/T 2951.21-2008 — Common test methods for insulating and sheathing materials of electric and optical cables -- Part 21: Methods specific to elastomeric compounds -- Ozone resistance, hot set and mineral oil immersion tests
GB/T 2951.23-1994 — Test method for determining mechanical and physical properties of electric cables and wires. Bending test
GB/T 2951.24-1994 — Test method for determining mechanical and physical properties of electric cables and wires. Test for copper naphthenate content of protective coverings
GB/T 2951.25-1994 — Test method for determining mechanical and physical properties of electric cables and wires. Test for anaerobe-corrosion of protective coverings
GB/T 2951.26-1994 — Test method for determining mechanical and physical properties of electric cables and wires. Saline bath test
GB/T 2951.27-1994 — Test method for determining mechanical and physical properties of electric cables and wires. Corrosion spread test
GB/T 2951.28-1994 — Test method for determining mechanical and physical properties of electric cables and wires. Test for abrasion of extruded oversheaths
GB/T 2951.31-1994 — Test method for determining mechanical and physical properties of electric cables and wires. Test for resistance of P. V. C. insulations to cracking
GB/T 2951.31-2008 — Common test methods for insulating and sheathing materials of electric and optical cables -- Part 31: Methods specific to PVC compounds -- Pressure test at high temperature -- Test for resistance to cracking
GB/T 2951.32-1994 — Test method for determining mechanical and physical properties of electric cables and wires. Test for resistance of P. V. C. sheaths to cracking
GB/T 2951.32-2008 — Common test methods for insulating and sheathing materials of electric and optical cables -- Part 32: Methods specific to PVC compounds -- Loss of mass test -- Thermal stability test
GB/T 2951.34-1994 — Test method for determining mechanical and physical properties of electric cables and wires. Tear test
GB/T 2951.37-1994 — Test method for determining mechanical and physical properties of electric cables and wires. Test for oxidative inductive time
GB/T 2951.38-1986 — Termite test mothods for wires and cables
GB/T 2951.41-1994 — Test method for determining mechanical and physical properties of electric cables and wires. Measurement of the melt flow index
GB/T 2951.41-2008 — Common test methods for insulating and sheathing materials of electric and optical cables -- Part 41: Methods specific to polyethylene and polypropylene compounds -- Resistance to environmental stress cracking -- Measurement of the melt flow index -- Carb
GB/T 2951.42-1994 — Test method for determining mechanical and physical properties of electric cables and wires. Wrapping test after thermal ageing in air
GB/T 2951.42-2008 — Common test methods for insulating and sheathing materials of electric and optical cables -- Part 42: Methods specific to polyethylene and polypropylene compounds -- Tensile strength and elongation at break after conditioning at elevated temperature
GB/T 2951.51-2008 — Common test methods for insulating and sheathing materials of electric and optical cables -- Part 51: Methods specific to filling compounds -- Drop point -- Separation of oil -- Lower temperature brittleness -- Total acid number -- Absence of corrosive co
GB/T 2951.100-2026 — Electric and optical fibre cables - Test methods for non-metallic materials - Part 100: General
GB/T 2951.201-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 201: General tests—Measurement of insulation thickness
GB/T 2951.202-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 202:General tests—Measurement of thickness of non-metallic sheath
GB/T 2951.203-2026 — Electric and optical fibre cables - Test methods for non-metallic materials - Part 203: General tests - Measurement of overall dimensions
GB/T 2951.301-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 301: Electrical tests—Measurement of the permittivity at 23℃ of filling compounds
GB/T 2951.401-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 401: Miscellaneous tests—Thermal ageing methods—Ageing in an air oven
GB/T 2951.402-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 402:Miscellaneous tests—Water absorption tests
GB/T 2951.403-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 403: Miscellaneous tests—Ozone resistance test on cross-linked compounds
GB/T 2951.404-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 404: Miscellaneous tests—Mineral oil immersion tests for sheaths
GB/T 2951.405-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 405: Miscellaneous tests—Thermal stability test for PVC insulations and PVC sheaths
GB/T 2951.406-2026 — Part 406: Miscellaneous tests - Resistance to stress cracking of polyethylene and polypropylene compounds
GB/T 2951.407-2026 — Part 407: Miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compounds
GB/T 2951.408-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 408:Miscellaneous tests—Long-term stability test of polyethylene and polypropylene compounds
GB/T 2951.409-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 409:Miscellaneous tests—Loss of mass test for thermoplastic insulations and sheaths
GB/T 2951.410-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 410:Miscellaneous tests—Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors
GB/T 2951.411-2026 — Electric and optical fibre cables - Test methods for non-metallic materials - Part 411: Miscellaneous tests - Low temperature brittleness of filling compounds
GB/T 2951.412-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 412: Miscellaneous tests—Thermal ageing methods—Ageing in an air bomb
GB/T 2951.501-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 501:Mechanical tests—Tests for determining the mechanical properties of insulating and sheathing compounds
GB/T 2951.502-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 502: Mechanical tests—Shrinkage test for insulations
GB/T 2951.503-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 503: Mechanical tests—Shrinkage test for sheaths
GB/T 2951.504-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 504: Mechanical tests—Bending tests at low temperature for insulations and sheaths
GB/T 2951.505-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 505:Mechanical tests—Elongation at low temperature for insulations and sheaths
GB/T 2951.506-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 506: Mechanical tests—Impact test at low temperature for insulations and sheaths
GB/T 2951.507-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 507:Mechanical tests—Hot set test for cross-linked materials
GB/T 2951.508-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 508:Mechanical tests—Pressure test at high temperature for insulation and sheaths
GB/T 2951.509-2026 — Part 509: Mechanical tests - Test for resistance of insulations and sheaths to cracking (heat shock test)
GB/T 2951.510-2026 — Part 510: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after air oven ageing
GB/T 2951.511-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 511: Mechanical tests—Measurement of the melt flow index of polyethylene and polypropylene compounds
GB/T 2951.512-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 512: Mechanical tests—Methods specific to polyethylene and polypropylene compounds—Tensile strength and elongation at break after conditioning at elevated temperature
GB/T 2951.513-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 513:Mechanical tests—Methods specific to polyethylene and polypropylene compounds—Wrapping test after conditioning
GB/T 2951.601-2026 — Electric and optical fibre cables - Test methods for non-metallic materials - Part 601: Physical tests - Measurement of drop point of filling compounds
GB/T 2951.602-2026 — Electric and optical fibre cables - Test methods for non-metallic materials - Part 602: Physical tests - Oil separation of filling compounds
GB/T 2951.603-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 603:Physical tests—Measurement of total acid number of filling compounds
GB/T 2951.604-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 604:Physical tests—Measurement of absence of corrosive components in filling compounds
GB/T 2951.605-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 605: Physical tests—Measurement of carbon black and/or mineral filler in polyethylene compounds
GB/T 2951.606-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 606: Physical tests—Methods for determining the density
GB/T 2951.607-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 607: Physical tests—Test for the assessment of carbon black dispersion in polyethylene and polypropylene
5 Classification and status
Prefix GB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — all pages — is available in the English PDF.
How to Download GB/T 2951.302-2026
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 2951.401-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 401: Miscellaneous tests—Thermal ageing methods—Ageing in an air oven
GB/T 2951.301-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 301: Electrical tests—Measurement of the permittivity at 23℃ of filling compounds
GB/T 2951.402-2026 — Electric and optical fibre cables—Test methods for non-metallic materials—Part 402:Miscellaneous tests—Water absorption tests
GB/T 2951.302-2026
$255.00