GB/T 29268.5-2022Information technology - Biometric performance testing and reporting - Part 5: Access control scenario and grading scheme (English PDF)
信息技术 生物特征识别性能测试和报告 第5部分:访问控制场景与分级机制
This is a limited preview
Buy now to download the full PDF (59 pages)
Need quotation for your management?
Get a formal quotation for GB/T 29268.5-2022 in 30 minutes.
Issued by
State Administration for Market Regulation, China National Standardization Administration
Level / Type
National · Recommended
Issue date
October 12, 2022
Implementation date
May 1, 2023
Scope
GB/T 29268.5-2022 is the English-translated version of 信息技术 生物特征识别性能测试和报告 第5部分:访问控制场景与分级机制.
GB/T 29268.5-2022 is the Chinese standard "Information technology - Biometric performance testing and reporting - Part 5: Access control scenario and grading scheme".
Its scope clause reads: This document. --- Defines a general biometric access control scenario, which is suitable for scenario evaluation of biometric authentication systems; --- Provides a quantitative expression of the classification mechanism for the requirements and performance levels of the biometric identification system; --- Provide a general basis for scenario evaluation, applicable to specific test methods and achievable performance of specific biometric identification systems grade.
This document is suitable for performance testing of biometric identification systems, and does not involve detailed comparison algorithms or biometrics of potential users. distribution of signs.
The minimum false acceptance rate for this document is 0.1%. If further reduction of the false acceptance rate is required, custom tests (not within the scope of this document) range) may be appropriate, the test should fully comply with the provisions of GB/T 29268.2.
This document deals with testing of biometric systems for physical access control as well as testing of device suitability for logical access on a case-by-case basis.
Errors and throughput measurements caused by users deliberately avoiding being correctly identified by the biometric system are outside the scope of this document (e.g. active impostors).
In addition, this document does not cover the following. --- Reliability, availability and maintainability; ---Security and confidentiality, including loopholes; --- Human factors, including user acceptability; ---envirnmental factor; ---Personal safety; ---Cost-effectiveness; ---Compliance with privacy regulations.
The assessment of these aspects is the responsibility of the relevant departments.
Found what you need?
Document preview — GB/T 29268.5-2022
National Standard of the People's Republic of China
- ICS
- 35.240.15
- Classification
- L 71
Issued by: State Administration for Market Regulation, China National Standardization Administration
Contents
- Preface
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Compliance
- 5 Test Scenario Definition
- 5.1 General
- 5.2 Relationship between access control system and biometric identification system/subsystem
- 5.3 Overview of evaluation indicators
- 5.4 Evaluation method
- 5.5 Characteristics and management of personnel to be tested
- 5.6 Privacy
- 6 Test method and implementation
- 6.1 Scheme
- 6.2 General test method
- 6.3 Test method
- 6.4 Errors and exceptions
- 6.5 Incremental Performance Evaluation
- 7 Grading and Reporting
- 7.1 Grading
- 7.2 Documentation requirements and management
- 7.3 Performance Results Report
- Appendix A (Informative) Grading Information
- Appendix B (Normative) Statistical Methods for Confidence Interval Rank Test Index Estimation
1 Scope
This document.
--- Defines a general biometric access control scenario, which is suitable for scenario evaluation of biometric authentication systems;
--- Provides a quantitative expression of the classification mechanism for the requirements and performance levels of the biometric identification system;
--- Provide a general basis for scenario evaluation, applicable to specific test methods and achievable performance of specific biometric identification systems grade.
This document is suitable for performance testing of biometric identification systems, and does not involve detailed comparison algorithms or biometrics of potential users.
distribution of signs.
The minimum false acceptance rate for this document is 0.1%. If further reduction of the false acceptance rate is required, custom tests (not within the scope of this document) range) may be appropriate, the test should fully comply with the provisions of GB/T 29268.2.
This document deals with testing of biometric systems for physical access control as well as testing of device suitability for logical access on a case-by-case basis.
Errors and throughput measurements caused by users deliberately avoiding being correctly identified by the biometric system are outside the scope of this document (e.g. active impostors). In addition, this document does not cover the following.
--- Reliability, availability and maintainability;
---Security and confidentiality, including loopholes;
--- Human factors, including user acceptability;
---envirnmental factor;
---Personal safety;
---Cost-effectiveness;
---Compliance with privacy regulations.
The assessment of these aspects is the responsibility of the relevant departments.
2 Normative references
The contents of the following documents constitute the essential provisions of this document through normative references in the text. Among them, dated references
For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document.
GB/T 29268.1-2012 Information Technology Biometric Recognition Performance Testing and Reporting Part 1.Principles and Framework (ISO /IEC 19795-1.2006, IDT)
GB/T 29268.2-2012 Information Technology Biometric Recognition Performance Test and Report Part 2.Technology and Scenario Evaluation
Test method (ISO /IEC 19795-2.2007, IDT)
ISO /IEC TR 19795-3 Information technology biometric performance testing and reporting - Part 3.Modality-specific testing ting)
GB/T 38663 | GB/T 37036.3 | GB/T 37036.2 | GB/T 29268.7 | GB/T 29268.6 | GB/T 29268.2 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 59 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 29268.1-2012Information technology -- Biometric performance testing and reporting -- Part 1: Principles and framework
- GB/T 29268.2-2012Information technology -- Biometric performance testing and reporting -- Part 2: Testing methodologies for technology and scenario evaluation
IEC 19795
How to Download GB/T 29268.5-2022
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 29268.1-2012 — Information technology -- Biometric performance testing and reporting -- Part 1: Principles and framework
GB/T 29268.2-2012 — Information technology -- Biometric performance testing and reporting -- Part 2: Testing methodologies for technology and scenario evaluation
GB/T 29268.6-2022 — Information technology - Biometric performance testing and reporting - Part 6: Testing methodologies for operational evaluation
GB/T 29268.5-2022
$480.00