GB/T 28853-2012Thermostatic baths and circulators - Heated circulators (English PDF)
恒温槽与恒温循环装置 高温恒温循环装置
This is a limited preview
Buy now to download the full PDF (18 pages)
Need quotation for your management?
Get a formal quotation for GB/T 28853-2012 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 5, 2012
Implementation date
February 15, 2013
Scope
GB/T 28853-2012 is the English-translated version of 恒温槽与恒温循环装置 高温恒温循环装置.
GB/T 28853-2012 covers the heated circulator, the laboratory device that holds a liquid at a set temperature and pumps it through something else - a reactor jacket, a viscometer, a test chamber, a condenser.
It is a piece of equipment whose specification is easy to state loosely and hard to compare: two circulators both claiming +/-0.1 °C may differ substantially in how quickly they reach a setpoint, how well they hold it against a changing load, and how much temperature difference exists between the bath and the point where the work is actually being done.
This standard specifies the classification of heated circulators, the conditions under which they are rated, the requirements they must meet, the test methods, the inspection rules, and the provisions for marking, packaging, transport, storage and accompanying documentation.
It applies to heated circulators without active cooling that supply a liquid heat transfer medium.
Filed under ICS 19.040 and CCS N61 as basic laboratory equipment, it is the reference for instrument manufacturers, for laboratory procurement writing a comparable specification, and for the calibration bodies that check what a circulator is really delivering. It is the companion to GB/T 28850-2012 on heated liquid baths.
Found what you need?
Document preview — GB/T 28853-2012
National Standard of the People's Republic of China
- ICS
- 19.040
- Classification
- N61
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- ForewordIII
- 1 Scope1
- 2 Normative references1
- 3 Category1
- 4 Conditions2
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
The standard proposed by China Machinery Industry Federation.
The standard by the China Machinery Industry Federation.
Drafting of this standard. Hangzhou snow carbon thermostat Technology Co., Ltd., Chongqing Sida Test Equipment Co., Ltd., Zhejiang Branch metering
Studies Institute of Instrumentation Technology and Economy Institute, Southern Jiangsu Wuxi Test Equipment Co., Ministry of Electronics Industry and Information Technology
Fifth Institute, Hunan Academy of measuring and testing.
Participated in the drafting of this standard. the 海爱斯佩克 Environmental Equipment Co., Ltd., Shenyang Academy of Instrumentation Science, Anhui Institute of Metrology
Study hospital, instrument Hengyang Heng Electric Co., Ltd., China Electric Apparatus Research Institute, Shanghai Jing Hong Experimental Equipment Co., Ltd. Ningbo Dongfang heating equipment
Ltd., Chongqing Yinhe Experimental Instrument Co., Ltd.
The main drafters of this standard. Xu Yueming, Chen Yunsheng, Zhou Lianqin, Jinli Hui, Ni Yiming, Zousu Yang, Xiong Zhi-ming, Feng Hua, Xu Qiuling,
He Gang Jian, Liu Xiangheng, Zhouxiu Yuan, Li Yaqin, Wang Xiaofeng, Lim Chun Wing, Shen Zhong only, Jinmei Feng, Wang Jialong, Wang Huabin.
Thermostatic bath and circulating means
High temperature thermostat circulation means
1 Scope
This standard specifies the classification, conditions of high temperature thermostat cycle apparatus, requirements, test methods, inspection rules, marking, packaging, transportation, storage
Deposit and accompanying documents.
This standard applies to the high temperature thermostat cycle apparatus active cooling device is not equipped to provide liquid heat transfer medium in the form of a constant temperature environment (hereinafter
High temperature short cycle apparatus).
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 191-2008 Packaging - Pictorial signs
GB/T 2829-2002 periodic inspection Sampling procedures and tables (suitable for process stability test)
GB 4793.1-2007 measurement, control and laboratory safety requirements for electrical equipment - Part 1. General requirements
GB 4793.6-2008 measurement, control and laboratory safety requirements for electrical equipment - Part 6. Laboratory material heating apparatus Particular requirements for equipment
GB/T 9969-2008 General Industrial Product Manual
GB/T 16895.10-2010 low-voltage electrical installations Part 4-44. Protection for safety voltage electromagnetic harassment and harassment protection
GB/T 17248.3-1999 Acoustics machinery and equipment noise emission and other operating position emission sound pressure levels specified location Measuring method in situ Determination of JB/T 9512-1999 climate chamber test equipment and sound power levels Category 3 Non-combustible liquids or combustible liquids can be used as a high temperature liquid heat transfer medium circulation device, high temperature cycle device category names, requirements and standard Chi Table 1. Category Name e liquid heat transfer medium request flag I a non-flammable liquid over-temperature protection c NFL Combustible liquid b Adjustable temperature over-temperature protection d Adjustable temperature over-temperature protection and an additional level of protection d FL a usually water and the other in a single fault condition and the predetermined temperature range nonflammable liquid.
Remaining clauses in the full document
- 3 Category
- 4 Conditions
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 18 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191-2008Graphical symbols marking for handling and storage of packages
- GB/T 2829-2002Sampling procedures and tables for periodic inspection by attributes
- GB 4793.1-2007Safety requirements for electrical equipment for measurement,control,andlaboratory use-Part 1:General requirements
- GB 4793.6-2008Safety requirements for electrical for measurement, control, and laboratory use - Part 6: Particular requirements for laboratory equipment for the heating of materials
- GB/T 9969-2008General principles for preparation of instructions for use of industrial products
- GB/T 16895.10-2010Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances
Similar standards
How to Download GB/T 28853-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 4793.1-2007 — Safety requirements for electrical equipment for measurement,control,andlaboratory use-Part 1:General requirements
GB 4793.6-2008 — Safety requirements for electrical for measurement, control, and laboratory use - Part 6: Particular requirements for laboratory equipment for the heating of materials
GB/T 10589-2008 — Specifications for low temperature test chambers
Secure payment via Stripe
Payments accepted
GB/T 28853-2012
$255.00