GB/T 26805.4-2011Industrial control computer system - Software - Part 4: Engineering document specification (English PDF)
工业控制计算机系统 软件 第4部分:工程化文档规范
This is a limited preview
Buy now to download the full PDF (58 pages)
Need quotation for your management?
Get a formal quotation for GB/T 26805.4-2011 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 29, 2011
Implementation date
December 1, 2011
Scope
GB/T 26805.4-2011 is the English-translated version of 工业控制计算机系统 软件 第4部分:工程化文档规范.
GB/T 26805.4-2011 is the Chinese standard "Industrial control computer system - Software - Part 4: Engineering document specification".
Its scope clause reads: This section GB/T 26805 provisions of industrial control software projects, at various stages of their life cycle generated by major software text File content, format, and preparation requirements for a software development project, evaluation, use and maintenance of reference.
This section applies to the preparation of industrial control software and revision of technical documentation in. Its clauses include terms and definitions; document specification.
Found what you need?
Document preview — GB/T 26805.4-2011
National Standard of the People's Republic of China
- ICS
- 25.040.40
- Classification
- N 18
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 document specification
- Appendix E (normative) software outline design specification Compose tips
- Annex F (normative) software to prepare detailed design specification of 48 tips
- Annex G (normative) preparation of design specification database 51 Tips
- Annex M (normative) program maintenance manual preparation tips
1 Scope
This section GB/T 26805 provisions of industrial control software projects, at various stages of their life cycle generated by major software text
File content, format, and preparation requirements for a software development project, evaluation, use and maintenance of reference.
This section applies to the preparation of industrial control software and revision of technical documentation in.
2 Normative references
The following documents contain provisions which, through reference GB/T 26805 in this section constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section.
GB/T 7714-2005 after bibliographic reference to the rules (ISO 690. 1987, NEQ)
GB/T 8567-2006 computer software documentation
GB/T 11457-2006 Information technology - Software engineering terminology
GB/T 26805.3-2011 Industrial Control System Software - Part 3. Document Management Guide
3 Terms and Definitions
GB/T 11457-2006 and established the following terms and definitions apply to this part of the GB/T 26805 of.
3.1 System
Unless otherwise stated, it refers to the software system.
3.2 Sensitive parts
System or part of the performance is susceptible to certain elements or parts of the site.
3.3 Sensitivity
System or part of certain factors is susceptible to performance.
3.4 Sensitive conditions
System or part of certain factors is susceptible to performance conditions.
3.5 Engineering documentation
Industrial control software life cycle project generated documents.
4 document specification
4.1 Feasibility Study Report
4.1.1 General
The feasibility study report on the industry to make a summary description of the control object, according to the needs of the environment and implementation of software development projects in certain
GB/T 41251-2022 | GB/T 32828-2016 | DL/T 680-2015 | GB/T 26804.7-2017 | GB/T 26802.2-2017 | GB/T 26805.5-2011 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 58 pages — is available in the English PDF.
Similar standards
How to Download GB/T 26805.4-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 26805.5-2011 — Industrial control computer system - Software - Part 5: User software document
GB/T 26805.3-2011 — Industrial control computer system - Software - Part 3: Guidelines for the document management
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 26805.4-2011
$950.00