GB/T 25826-2022Epoxy-coated steel for the reinforcement of concrete (English PDF)
钢筋混凝土用环氧涂层钢筋
This is a limited preview
Buy now to download the full PDF (44 pages)
Need quotation for your management?
Get a formal quotation for GB/T 25826-2022 in 30 minutes.
Issued by
State Administration for Market Regulation, China National Standardization Administration
Level / Type
National · Recommended
Issue date
October 12, 2022
Implementation date
October 12, 2022
Scope
GB/T 25826-2022 is the English-translated version of 钢筋混凝土用环氧涂层钢筋.
GB/T 25826-2022 is the Chinese standard "Epoxy-coated steel for the reinforcement of concrete".
Its scope clause reads: This document specifies the classification code, order content, technical requirements, and tests of fusion-bonded epoxy-coated steel bars and finished steel bars for concrete Methods, inspection rules, packaging, marking and quality certificates.
This document applies to rebar processed before and after coating and to finished rebar processed before coating. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 25826-2022
National Standard of the People's Republic of China
- ICS
- 77.140.60
- Classification
- H 44
- Replacing
- GB/T 25826-2010
Issued by: State Administration for Market Regulation, China National Standardization Administration
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 3.1 Coated steel bar coatedbar
- 3.2 Pre-coating conversioncoating
- 3.3 strip disbonding
1 Scope
This document specifies the classification code, order content, technical requirements, and tests of fusion-bonded epoxy-coated steel bars and finished steel bars for concrete
Methods, inspection rules, packaging, marking and quality certificates.
This document applies to rebar processed before and after coating and to finished rebar processed before coating.
2 Normative references
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document.
GB/T 1499.1 Steel for Reinforced Concrete Part 1.Hot Rolled Round Bars
GB/T 1499.2 Steel for Reinforced Concrete Part 2.Hot Rolled Ribbed Bars
GB/T 1499.3 Steel for Reinforced Concrete Part 3.Reinforced Welded Mesh
GB/T 1768 Paint and Varnish Determination of Abrasion Resistance Rotating Rubber Grinding Wheel Method (GB/T 1768-2006, ISO 7784-2.
1997, IDT)
GB/T 2101 General requirements for acceptance, packaging, marking and quality certificate of shaped steel
GB/T 3505-2009 Product Geometric Specifications (GPS) Terms, Definitions and Surface Structure Parameters of Surface Structure Profile Method (ISO 4287.1997, IDT)
GB/T 8923.1-2011 Visual assessment of surface cleanliness of steel surface treatment before application of paint - Part 1.Uncoated
The rust grade and treatment grade of the steel surface and the steel surface after comprehensive removal of the original coating (ISO 8501-1.2007, IDT)
GB/T 13452.2-2008 Determination of film thickness of paints and varnishes (ISO 2808.2007, IDT)
GB/T 13788 Cold-rolled ribbed steel bars
GB/T 20624.2-2006 Paints and varnishes - Rapid deformation (impact resistance) test - Part 2.Drop weight test (small area impact header) (ISO 6272-2.2002, IDT)
GB/T 50152 Test method standard for concrete structures
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Coated steel bar coatedbar
Fusion bonding epoxy-coated rebar, welded mesh and finished rebar.
3.2 Pre-coating conversioncoating
Pre-treatment of metal surfaces prior to coating to promote coating adhesion, corrosion resistance and blister resistance.
3.3 strip disbonding
Bond failure between fusion bonded epoxy coating and rebar surface.
GB/T 24587 | GB/T 24242.1 | GB/T 24242.2 | GB/T 32968 | GB/T 26280 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 44 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1499.3Steel for the reinforcement of concrete - Part 3:Welded fabric
- GB/T 1768Paints and varnishes -- Determination of resistance to abrasion -- Rotating abrasive rubber wheel method
- GB/T 1768-2006Paints and varnishes -- Determination of resistance to abrasion -- Rotating abrasive rubber wheel method
- GB/T 2101General requirment of acceptance, packaging, marking and certification for section steel
- GB/T 3505-2009Geometrical product specifications (GPS) -- Surface texture: Profile method -- Terms, definitions and surface texture parameters
- GB/T 8923.1-2011Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previ
GB/T 1499.1 · GB/T 1499.2 · ISO 7784 · ISO 4287.1997 · ISO 8501 · ISO 2808.2007 · GB/T 13788 · ISO 6272
How to Download GB/T 25826-2022
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 13452.2-2008 — Paints and varnishes -- Determination of film thickness
GB/T 1499.3-2022 — Steel for the reinforcement of concrete - Part 3:Welded fabric
GB/T 1768-2006 — Paints and varnishes -- Determination of resistance to abrasion -- Rotating abrasive rubber wheel method
Secure payment via Stripe
Payments accepted
GB/T 25826-2022
$315.00