GB/T 25684.14-2023Earth-moving machinery - Safety - Part 14: Requirements for compact tool carriers (English PDF)
土方机械 安全 第14部分:小型机具承载机的要求
This is a limited preview
Buy now to download the full PDF (12 pages)
Need quotation for your management?
Get a formal quotation for GB/T 25684.14-2023 in 30 minutes.
Issued by
State Administration for Market Regulation, China National Standardization Administration
Level / Type
National · Recommended
Issue date
November 27, 2023
Implementation date
June 1, 2024
Scope
GB/T 25684.14-2023 is the English-translated version of 土方机械 安全 第14部分:小型机具承载机的要求.
GB/T 25684.14-2023 — This document stipulates the safety requirements for small equipment carriers; stipulates the conditions for operation of earthmoving machinery when specified by the manufacturer or when misuse is foreseen: When applied under the conditions, all major hazards, hazardous states and hazardous events related to it (see Appendix A of GB/T 25684.1-2021); and Specifies technical measures to eliminate or reduce risks caused by major hazards, hazardous states or hazardous events during use, operation and maintenance: This document is used in conjunction with GB/T 25684.1 (which specifies general safety requirements for two or more earthmoving machinery families): of this document Specific requirements take precedence over the general requirements of GB/T 25684.1: This document does not apply to machines manufactured before the implementation of this document:
Found what you need?
Document preview — GB/T 25684.14-2023
National Standard of the People's Republic of China
- ICS
- 53.100
- Classification
- P 97
Issued by: State Administration for Market Regulation, China National Standardization Administration
Contents
- Preface
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Safety requirements and protective measures
- 4.1 General requirements
- 4.2 Small implement carrier with driver platform
- 4.3 Driver position
- 4.4 Driver's controls and indicating devices
- 4.5 Braking system
- 4.6 Visibility
- 4.7 Alarm devices and safety signs
- 4.8 Stability
- 4.9 Lifting of objects
- 4.10 Protective measures and protective devices
- 4.11 Electronic and electrical systems
- 4.12 Fire protection
- 4.13 Interchangeable working devices and attachments
- 4.14 Maintenance
- 4.15 Speed limits for non-ridden machines
- 5 Usage Information
- Appendix A (normative) Overturning limit test
- Reference
Foreword
This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents" Drafting:
This document is Part 14 of GB/T 25684 "Safety of Earthmoving Machinery": GB/T 25684 has released the following parts:
---Part 1: General requirements;
---Part 2: Bulldozer requirements;
---Part 3: Loader requirements;
---Part 4: Requirements for backhoe loaders;
---Part 5: Requirements for hydraulic excavators;
---Part 6: Requirements for dump trucks;
---Part 7: Requirements for scrapers;
---Part 8: Requirements for graders;
---Part 9: Requirements for pipelayers;
---Part 10: Requirements for trenching machines;
---Part 11: Requirements for backfill compactors;
---Part 12: Requirements for mechanical excavators;
---Part 13: Requirements for rollers;
---Part 14: Requirements for small machine tool carriers;
---Part 15: Requirements for tire-type forklifts:
This document is equivalent to ISO 20474-15:2019 "Earthmoving Machinery Safety Part 15: Requirements for Small Implement Carriers":
This document has made the following minimal editorial changes:
---In order to coordinate with the existing standards, the name of the standard is changed to "Earthmoving Machinery Safety Part 14: Requirements for Small Machinery Carriers":
Please note that some content in this document may be subject to patents: The publisher of this document assumes no responsibility for identifying patents:
Introduction
This document is a Category C standard defined by ISO 12100:
The scope of this document describes the machinery involved and the extent of the hazards, hazardous states or hazardous events involved:
Since the design and manufacture of machines comply with the requirements of Class C standards, when the requirements of Class C standards are different from those of Class A or Class B standards, at the same time, the requirements of Category C standards take precedence over other standards:
GB/T 25684 "Earthmoving Machinery Safety" is a basic and universal guide for my country's earthmoving machinery products to meet relevant safety requirements:
standard: GB/T 25684 aims to establish general safety requirements applicable to earthmoving machinery products as well as special safety requirements for specific machine families:
The requirements are planned to consist of 15 parts:
---Part 1: General requirements: The purpose is to establish general safety requirements applicable to all machine types in the earthmoving machinery industry:
The basic standard for the whole series of standards:
---Part 2: Bulldozer requirements: The purpose is to target the unique characteristics of bulldozer products and propose specific products that are consistent with their own product characteristics:
Security Requirements Clause:
---Part 3: Loader requirements: The purpose is to target the unique characteristics of loader products and propose specific products that are consistent with their own product characteristics:
Security Requirements Clause:
---Part 4: Backhoe loader requirements: The purpose is to propose products that are consistent with the unique characteristics of backhoe loader products:
point-specific security requirements:
---Part 5: Requirements for hydraulic excavators: The purpose is to propose products that are in line with the unique characteristics of hydraulic excavator products:
point-specific security requirements:
---Part 6: Requirements for dump trucks: The purpose is to target the unique characteristics of dump truck products and propose specific products that are in line with the characteristics of its own products:
Security Requirements Clause:
---Part 7: Requirements for scrapers: The purpose is to propose specific products that are consistent with the characteristics of the scraper product based on the unique characteristics of the scraper product:
Security Requirements Clause:
---Part 8: Requirements for graders: The purpose is to target the unique characteristics of grader products and propose specific products that are consistent with their own product characteristics:
Security Requirements Clause:
---Part 9: Requirements for pipelayers: The purpose is to focus on the unique characteristics of pipelayer products and propose specific products that meet the characteristics of its own products:
Security Requirements Clause:
---Part 10: Requirements for trenching machines: The purpose is to focus on the unique characteristics of trenching machine products and propose features that are consistent with the characteristics of its own products:
Set safety requirements:
---Part 11: Requirements for backfill compactors: The purpose is to propose products that are suitable for the unique characteristics of backfill compactor products:
Characteristics of specific safety requirements:
---Part 12: Requirements for mechanical excavators: The purpose is to propose products that are suitable for the unique characteristics of mechanical excavator products:
Characteristics of specific safety requirements:
---Part 13: Requirements for rollers: The purpose is to focus on the unique characteristics of road roller products and propose features that are consistent with the characteristics of its own products:
Set safety requirements:
---Part 14: Requirements for small machine tool carriers: The purpose is to propose products that meet the unique characteristics of small machine tool carriers:
Specific safety requirements of its own product features:
---Part 15: Requirements for tire-type forklifts: The purpose is to propose products that are suitable for the unique characteristics of tire-type forklift products:
Specific safety requirements for product features:
The safety requirements of Part 2 to Part 15 are used in conjunction with the general requirements of Part 1 to better meet the usage requirements:
Earthmoving Machinery Safety Part 14: Requirements for small implement carriers
1 Scope
This document stipulates the safety requirements for small equipment carriers; stipulates the conditions for operation of earthmoving machinery when specified by the manufacturer or when misuse is foreseen:
When applied under the conditions, all major hazards, hazardous states and hazardous events related to it (see Appendix A of GB/T 25684.1-2021); and Specifies technical measures to eliminate or reduce risks caused by major hazards, hazardous states or hazardous events during use, operation and maintenance:
This document is used in conjunction with GB/T 25684.1 (which specifies general safety requirements for two or more earthmoving machinery families): of this document Specific requirements take precedence over the general requirements of GB/T 25684.1:
This document does not apply to machines manufactured before the implementation of this document:
2 Normative reference documents
The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, the dated quotations for undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document:
GB/T 25684.1-2021 Safety of earthmoving machinery Part 1: General requirements (ISO 20474-1:2017, IDT) ISO 2330 Technical requirements and test methods for forklift forks (Fork-lifttrucks-Forkarms-Technicalcharac-Note: GB/T 5182-2008 Technical requirements and test methods for forklift forks (ISO 2330:2002, IDT) ISO 2867 Earth-moving machinery access systems (Earth-movingmachinery-Accesssystems) Note: GB/T 17300-2017 Earthmoving machinery access device (ISO 2867:2011, IDT) ISO 3411 Earth-moving machinery driver's body dimensions and driver's minimum movement space (Earth-movingmachinery -Note: GB/T 8420-2011 Body dimensions of earthmoving machinery drivers and minimum movement space of drivers (ISO 3411:2007, IDT) ISO 6165 Earth-moving machinery basic types identification, terms and definitions (Earth-movingmachinery-Basictypes-Note: GB/T 8498-2017 Basic type identification, terms and definitions of earthmoving machinery (ISO 6165:2012, IDT) ISO 6682 Earth-movingmachinery-Zonesofcomfort Note: GB/T 21935-2008 Comfort zone and accessible range for earthmoving machinery operation (ISO 6682:1986/Amd1:1989) ISO 7546 Bucket capacity calibration of earth-moving machinery loaders and shovel excavators (Earth-movingmachinery-Note: GB/T 21942-2008 Bucket capacity calibration of earthmoving machinery loaders and shovel excavators (ISO 7546:1983, MOD) ISO 14397-1 Earthmoving machinery loaders and backhoe loaders Part 1: Calculation and verification of rated working loads Tipover loads Note: GB/T 10175.1-2008 Earthmoving machinery loaders and backhoe loaders Part 1: Calculation and verification of rated working load tipping load meter Calculation test method (ISO 14397-1:2007, IDT) ISO 20474-1 Earth-moving machinery-Safety-Part 1: General requirements (Earth-movingmachinery-Safety-Part 1:
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 12 pages — is available in the English PDF.
How to Download GB/T 25684.14-2023
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 25684.15-2023 — Earth-moving machinery—Safety—Part 15:Requirements for block handler
GB/T 25684.13-2021 — Earth-moving machinery - Safety - Part 13: Requirements for rollers
GB/T 25684.12-2021 — Earth-moving machinery - Safety - Part 12: Requirements for cable excavators
GB/T 25684.14-2023
$240.00