GB/T 25110.3-2010Industrial automation systems and integration -- Distributed installation in industrial application -- Part 3: Power distribution bus (English PDF)

Foreword

GB/T 25110 "Industrial automation systems and integration - Distributed installation in industrial applications," contains the following sections.

Part 1. Sensors and actuators;

Part 2. Hybrid communication bus;

Part 3. distribution bus.

This part of GB/T 25110 Part 3.

This part identical with ISO 23570-3:2006 "Industrial automation systems and integration - Distributed installation in industrial applications in the first three Score. Distribution Bus "(in English), the use of equivalent translation method for drafting.

Technical content of this part of the structure and composition of ISO 23570-3:2006 "Industrial automation systems and integration of industrial applications Distribution Mounting Part 3. Distribution Bus "(in English) is consistent.

This section only the following editorial changes.

--- The "ISO 23570" to "GB/T 25110", the "ISO 23570-3" changed to "GB/T 25110 Part 3" or GB/T 25110.3 or "GB/T 25110 in this section";

--- Remove the ISO 23570-3:2006 Foreword and in accordance with the requirements of national standards for the preparation redrafting the foreword;

International standard --- appearing in this standard has been translated into national standards, national standards be renumbered number unconverted international standards Quasi reserved.

Appendix A of this section is informative appendix, Appendix B, Appendix C is a normative appendix.

This part is proposed by China Machinery Industry Federation.

This part of the automation systems and integration by the National Standardization Technical Committee (SAC/TC159) centralized.

This section is responsible for drafting unit. Beijing Machinery Industry Automation Research Institute.

Participated in the drafting of this section. Beijing Machine Tool Research Institute.

Introduction

Discrete parts manufacturing industry for the modern machine is a complex system, which includes the preparation of material (metal removal, molding material Etc.), material handling, clamping, and the transmission line parts move from one station to another station subsystem. Each subsystem is itself a Complex systems containing many sensors, actuators and control elements, which receive and transmit electrical signals and/or power required. To reduce it Downtime barrier case, most of them using the quick-change cable assemblies. System as a whole, the need for proper operation to coordinate the various subsystems, which requires more cables and connectors. Because of this complexity, proper operation of such a machine requires a large the amount of cables and connectors. Adding sensors, actuators and control elements of the number of cable assemblies cause this kind of increase. Because of its complex Polygamous, cable assemblies kind of increase will lead to increased maintenance costs, a large number of spare parts inventory and increase maintenance personnel training costs.

Explanation.

1 --- motors (e.g., stepper motors) with integrated electronic components;

2 --- fixed speed motor with separate motor controller;

3 --- distribution control cabinet;

4 --- having a fixed speed motor connected to the motor controller;

5 --- with integrated I/O modules and settings of sensors and actuators with a variable-speed motor;

6 --- having a sensor I/O modules;

7 --- motors (e.g., stepper motors) with integrated electronic components;

8 --- connected to a set of sensors and actuators including hydraulic/pneumatic valve in the I/O modules;

. 9 --- remote terminal.

FIG. 1 GB/T 25110 in the expression system components

GB/T 25110 provides for the cables, connectors and selection of parameters within the range of these elements a set of requirements, if at all to give full Foot, which will greatly reduce the complexity and maintenance costs of such machine line system. For manufacturers of such systems would reduce the complexity of the in this way the cost of profitability, and for the user of such a system, due to reduced spare parts inventory and simplify maintenance training will reduce downtime Party Formula profit.

GB/T 25110 technique described in other industrial processes and applicability; for discrete parts manufacturing, it does not limit the suitability Versatility.

GB/T 25110 expressed in three important aspects.

--- Sensors and actuators with interconnection system architecture;

--- Containing highways (field bus) and the power supply system architecture of the hybrid field device;

--- Trunk can provide power for the electric power system, all auxiliary motor.

GB/T 25110 power devices such as metal cutting spindle motor is not covered.

GB/T 25110 in the machine described by the national and international safety standards constraints. GB/T 25110 intends to support character details this combination of standard system components.

In Figure 1, the "solid" for the motor cable on behalf of the 3-phase AC power distribution bus. "Hollow" represents an fieldbus cable through Letter channels and low-voltage electric hybrid communication bus.

Figure 1 middle (3) 3 groups display for distribution bus control cabinet. The distal end portion of the cabinet containing the fieldbus communication, and low-voltage power supply

3-phase power.

The left control cabinet (1) is a motor having an integrated electronic component, and (2) is a fixed speed motor having a separate motor controller.

Two units via the communication bus and power distribution bus connected to the control cabinet.

Control cabinet right (4) is fixed speed motor has a motor connected to the controller, and (5) having a connection to a number of sensors and actuators Variable speed motor is integrated I/O modules, and (6) is connected to a plurality of sensors and actuators comprising hydraulic/pneumatic valve of another an I/O module. I/O modules (6) Mix only communication bus connected to the control cabinet through.

Front of the cabinet there are three units, (7) is a motor with integrated electronic components (8) is connected to several sensors and containing fluid Another I actuator pressure/pneumatic valve/O modules, and (9) is a remote terminal.

Figure 1 may be used to explain the interconnection GB/T 25110 of the various components.

GB/T 25110.1 provides support for sensor system requirements, actuators and I/O module requirements. GB/T 25110.2 Providing communication requirements and low voltage distribution systems for sharing. This section GB/T 25110 provides a system for small power motors Distribution requirements.

Although by the use of a separate part of the standard, it may be able to significantly reduce maintenance and operating costs, but to get the maximum benefit, Only when all part of the standard execution.

This section GB/T 25110 provides requirements for the distribution system to support the requirements of small power motors.

Industrial automation systems and integration Distributed installation in industrial applications Part 3. power distribution bus

1 Scope

This section GB/T 25110 requirements between machine tools and industrial automation in the field of large-scale equipment similar to the control system components Interconnections. The specification includes. cable type, size and color of the sheath, connector type and distribution as well as contacts for sensors and enforcement Actuator diagnostics.

This section GB/T 25110 specifies the 3-phase auxiliary motor interconnect their power.

Note. This section GB/T 25110 no statements about security issues such equipment design/operation. This requirement should consult with appropriate safety standards.

2 Conformance

If you meet the requirements of Chapter 5, distribution bus cable assembly manufacturer can declare compliance with GB/T 25110 in this section.

If it meets the requirements of Section 5 and 6 of Chapter claim connector manufacturer can declare compliance with GB/T 25110 in this section.

If you meet the requirements of Chapter 5 or Chapter 6 requirements, motor controller manufacturer can declare compliance with GB/T 25110 in this section.

If you meet the requirements of Chapter 6, the motor and motor cable assemblies manufacturer can declare compliance with GB/T 25110 in this section.

If all of the elements involved in chapter 5 and/or Chapter 6 of discrete parts manufacturing equipment to meet those requirements, discrete parts manufacturing apparatus Prepared by the manufacturer can declare compliance with GB/T 25110 in this section.

3 Normative References

The following documents contain provisions which, through reference GB/T 25110 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section.

GB 4208-2008 housing protection (IP code) (IEC 60529:2001, IDT)

4 Terms and Definitions

The following terms and definitions apply to this part of the GB/T 25110 of.

IP code IPcode

The system is coded to indicate from harmful objects provided by the shell into the solid foreign invasion, water ingress protection level, and to the additional information associated with such protection.

[GB 4208-2008]

5 Requirements for power distribution bus