Valid

GB/T 24976.6-2010Guide of environmental design for electrical accessories -- Part 6: Appliance couplers for household and similar purpose (English PDF)

Preview PDF

This is a limited preview

Buy now to download the full PDF (4 pages)

Need quotation for your management?

Get a formal quotation for GB/T 24976.6-2010 in 30 minutes.

Issued by

Standardization Administration of China

Level / Type

National · Recommended

Issue date

August 9, 2010

Implementation date

February 1, 2011

Scope

GB/T 24976.6-2010 (Guide of environmental design for electrical accessories -- Part 6: Appliance couplers for household and similar purpose) is available as an English-translated PDF.

GB/T 24976.6-2010 — This section provides environmental aspects into household and similar appliances coupler product (hereinafter referred to as the home coupler) Basic in principle.

This section applies to new or improved product design. This section applies to the couplers for household and similar purposes including connectors, appliance inlet plug connectors, sockets and other appliances.

The purpose of this section is to the product design stage to control its impact on the environment.

Found what you need?

Document preview — GB/T 24976.6-2010

National Standard of the People's Republic of China

ICS: 29.020
Classification: K 04

Issued by: Standardization Administration of China

Preface
1 Scope
2 Normative references
3 Terms and definitions
4 Environmental aspects into product design and development of the overall consideration of
5 Basic principles of environmental aspects into product design and development
5.1 General
5.2 Raw material acquisition phase
5.3 Manufacturing Phase
5.4 Packaging, transport and distribution phase
5.5 Use Stage
5.6 End of life (recycling) Phase

Foreword

GB/T 24976 "Electrical accessories Environmental Design" includes the following sections.

--- Part 1. General;

--- Part 2. Conduit systems for cable management trough and pipe systems;

--- Part 3. Household and similar cable reel;

--- Part 4. industrial plug and socket coupler;

--- Part 5. plug and socket for household and similar purposes;

--- Part 6. Household and similar appliances couplers;

--- Part 7. Household and similar low-voltage electrical connector device;

--- Part 8. Switches for household and similar fixed electrical installations.

This part of GB/T 24976 "Electrical accessories Environmental Design" in Section 6. This section should be GB/T 24976.1-2010 "Electrical accessories Environmental Design - Part 1. General Principles" used in conjunction.

This part by the Environmental Committee of the National Standardization Technical Electrical and Electronic Products and Systems (SAC/TC297) and focal points.

This section drafted by. China Electric Apparatus Research Institute, Beijing Electrical Machinery Industry Technical and Economic Research Institute.

1 Scope

This section provides environmental aspects into household and similar appliances coupler product (hereinafter referred to as the home coupler) Basic in principle.

This section applies to new or improved product design.

This section applies to the couplers for household and similar purposes including connectors, appliance inlet plug connectors, sockets and other appliances.

The purpose of this section is to the product design stage to control its impact on the environment.

2 Normative references

The following documents contain provisions which, through reference GB/T 24976 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section.

GB 17465.1 Appliance couplers for household and similar purposes - Part 1. General requirements (GB 17465.1-2009, IEC 60320-1.

2007, MOD)

GB 17465.2 household and similar appliances couplers Part 2. Household and similar equipment interconnection couplers (GB 17465.2-2009, IEC 60320-2-2:1998, MOD) GB 17465.3 Appliance couplers for household and similar purposes Part 2. protection higher than IPX0 appliance couplers (GB 17465.3-2008, IEC 60320-2-3:2005, IDT) GB/T 24976.1-2010 electrical accessories Environmental Design - Part 1. General

3 Terms and Definitions

GB/T 24976.1-2010 Chapter 3 apply.

4 Environmental aspects into consideration overall product design and development

GB/T 24976.1-2010 Chapter 4 apply.

5 Basic principles of environmental aspects into product design and development

5.1 General

GB/T 24976.1-2010 5.1 add the following after apply.

Designers should note that research GB 17465.1, GB 17465.2, GB 17465.3 of the relevant requirements.

5.2 Raw material acquisition phase

GB/T 24976.1-2010 5.2 apply to add the following after.

5.2.101 Insulating material

Designers should note that research the following principles.

a) material category Household coupler insulation materials are mainly used in the manufacture base, inner frame, skin and other parts, should be preferred engineering thermoplastics (eg, PC, PA, ABS, etc.).

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 4 pages — is available in the English PDF.

Referenced standards

Normative references

IEC 60320

How to Download GB/T 24976.6-2010

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.