GB/T 23545-2009Determination of manganese in white wine -- Inductively coupled plasma atomic emission spectrometry (English PDF)
白酒中锰的测定 电感耦合等离子体原子发射光谱法
This is a limited preview
Buy now to download the full PDF (4 pages)
Need quotation for your management?
Get a formal quotation for GB/T 23545-2009 in 30 minutes.
Issued by
Standardization Administration of China
Level / Type
National · Recommended
Issue date
April 14, 2009
Implementation date
December 1, 2009
Scope
GB/T 23545-2009 is the English-translated version of 白酒中锰的测定 电感耦合等离子体原子发射光谱法.
GB/T 23545-2009 — This standard specifies the liquor manganese by inductively coupled plasma atomic emission spectroscopy method. This standard applies to the determination of various liquor manganese.
The standard detection limit. 0.002µg/mL. The standard detection range. 0.002µg/mL ~ 10µg/mL.
Found what you need?
Document preview — GB/T 23545-2009
National Standard of the People's Republic of China
- ICS
- 67.040
- Classification
- C 53
Issued by: Standardization Administration of China
Contents
- Foreword
- Introduction
- 1 Scope
- 2 Normative references
- 4 Reagents
- 5 Instruments
Foreword
This standard by the National Standardization Technical Committee of Food Industry and focal points.
This standard was drafted. People's Republic of China Exit Inspection and Quarantine of Heilongjiang, Jilin People's Republic of China Entry-Exit Inspection and Quarantine Bureau.
Introduction
Manganese is a trace element necessary for normal metabolism of the body, but an excess of manganese into the body can cause poisoning. Liquor is the main source of manganese and treated with potassium permanganate into wine. Manganese ions in an alkaline or neutral solution, manganese atoms price drop in price from 7 tetravalent, reaction manganese dioxide. In the compounds of manganese, the manganese atom lower the price, the greater the toxicity. Requirements wine in hygiene standards in the manganese content must not exceed 2µg/mL (based on Mn). This standard was proposed by the determination of manganese in wine by ICP-AES, the method is sensitive, high recovery rate, simple operation Single, easy to promote the use of.
Determination of manganese in the liquor Inductively coupled plasma atomic emission spectrometry
1 Scope
This standard specifies the liquor manganese by inductively coupled plasma atomic emission spectroscopy method.
This standard applies to the determination of various liquor manganese.
The standard detection limit. 0.002µg/mL.
The standard detection range. 0.002µg/mL ~ 10µg/mL.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
Preparation of GB/T 601 chemical reagent standard titration solution Preparation of standard solution of GB/T 602 chemical reagent determination of impurities (GB/T 602-2002, ISO 6353-1. 1982, NEQ) GB/T 603 chemical reagent test methods in the formulation and preparation of products (GB/T 603-2002, ISO 6353-1 with. 1982, NEQ) GB/T 6682 analytical laboratory use specifications and test methods (GB/T 6682-2008, ISO 3696. 1987, MOD) Principle 3 After wet digestion liquor samples, dilute to volume to volume, the sample solution is introduced into the liquor ICP-AES plasma flame, Mn Emission spectral intensity to determine its content from the calibration curve.
4 Reagents
This standard reagents and water, did not indicate when the other requirements, refer to two water gifted class pure reagents and GB/T 6682 stipulated.
Standard test solution required impurity standard solution, preparations and products, did not indicate when the other requirements, according to GB/T 601, GB/T 602, GB/T 603 provisions prepared.
4.1 nitrate.
4.2 perchloric acid.
4.3 mixed acid digestion. nitric acid + perchloric acid = 5 + 1.
4.4 nitric acid (5%). Take 5 parts of nitric acid was mixed with 95 parts of water.
4.5 manganese standard solution (1000µg/mL). Manganese standard solution according to GB/T 602 method of preparation, or directly use the nationally recognized standard substance.
4.6 manganese standard solution (100µg/mL). lessons 10.0mL manganese standard stock was placed in a 100mL flask, nitric acid (5% water Solution) (4.4) to the mark.
5 Instruments
5.1 Inductively coupled plasma atomic emission spectrometer.
5.2 water bath.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 4 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 601Chemical Reagent - Preparations of Standard Volumetric Solutions
- GB/T 602Chemical reagent - Preparation of standard solutions for impurity determination
- GB/T 602-2002Chemical reagent - Preparation of standard solutions for impurity determination
- GB/T 603Chemical reagent - Preparations of reagent solutions for use in test methods
- GB/T 603-2002Chemical reagent - Preparations of reagent solutions for use in test methods
- GB/T 6682Water for analytical laboratory use - Specification and test methods
ISO 6353 · ISO 3696
How to Download GB/T 23545-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 601-2016 — Chemical Reagent - Preparations of Standard Volumetric Solutions
GB/T 6011-2005 — Test method for flammability characteristics of fiber-reinforced plastics-Incandescent rod method
GB/T 6011-2026 — Test method for the flammability characteristics of fibre reinforced plastics - Incandescent rod method
Secure payment via Stripe
Payments accepted
GB/T 23545-2009
$105.00