Valid

GB/T 22660.7-2008Chemical analysis methods of lithium fluoride - Part 7: Determination of iron content - Orthophenantholine photometric method (English PDF)

氟化锂化学分析方法 第7部分:三氧化二铁含量的测定 邻二氮杂菲分光光度法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 22660.7-2008 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 29, 2008

Implementation date

November 1, 2009

Scope

GB/T 22660.7-2008 is the English-translated version of 氟化锂化学分析方法 第7部分:三氧化二铁含量的测定 邻二氮杂菲分光光度法.

GB/T 22660.7-2008 is the Chinese standard "Chemical analysis methods of lithium fluoride - Part 7: Determination of iron content - Orthophenantholine photometric method".

Its scope clause reads: This section GB/T 22660 specifies the method for determination of lithium fluoride iron oxide content. This section applies to the determination of lithium fluoride, iron oxide content. Measuring range. <=0.20%. Its clauses include method summary; reagents.

Found what you need?

Document preview — GB/T 22660.7-2008

National Standard of the People's Republic of China

ICS
77.120
Classification
H 60

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Method summary
  • 4 Reagents

1 Scope

This section GB/T 22660 specifies the method for determination of lithium fluoride iron oxide content.

This section applies to the determination of lithium fluoride, iron oxide content. Measuring range. <=0.20%.

2 Normative references

The following documents contain provisions which, through reference GB/T 22660 in this section constitute provisions of this section. For dated reference documents

Member, all subsequent amendments (not including errata content) or revised edition are not adapted to this section, however, encouraged to reach under this section

Parties to research agreement to use the latest versions of these documents. For undated references, the latest edition of this adaptation section.

GB/T 22660.1-2008 Chemical analysis methods of lithium fluoride - Part 1. Preparation and storage of test samples.

3 Method summary

Sample with sodium carbonate and boric acid mixed solvent melt, after acidification with hydroxylamine hydrochloride iron (III) reduction in acetate buffer medium (PH3.5 ~ pH4.2), iron (II) with o-phenanthroline to form a colored complex in a spectrophotometer at 510nm wavelength absorption measured

Luminosity.

4 Reagents

Anhydrous sodium carbonate 4.1. AR.

4.2 boric acid

AR.

4.3

HCl (1 + 1).

4.4

nitric acid (1 + 1).

4.5

hydroxylamine hydrochloride (10g/L).

4.6

phenanthroline solution (2.5g/L).

4.7

buffer solution (pH4.9). Weigh 272g of sodium acetate trihydrate were dissolved in 500mL of water, 240mL of glacial acetic acid was added (ca.

17.4mol/L).

4.8

sodium acetate solution (500g/L).

4.9

acetic acid (19 + 1).

4.10 ferric oxide standard stock solution

1mL containing 0.200mg ferric oxide, the following two ways can choose one.

4.10.1

Weigh 0.982g ferrous sulfate hexahydrate amine [Fe (NH4) 2 (SO4) 2 · 6H2O], placed in 100mL beaker, dissolved in water

After adding 20mL sulfuric acid (rho1.84g/mL), transferred to 1L volumetric flask, dilute to volume, and mix.

4.10.2

Weigh 0.200g at 600 °C ignition advance and cooled in the dryer ferric oxide [(Fe2O3) > 99.90%] to

On, placed in 100mL beaker, add 10mL of hydrochloric acid (rho1.19g/mL), was heated slowly until completely dissolved, cooled, transferred to 1L volumetric flask,

Dilute to volume, and mix.

4.11

ferric oxide standard solution.

Pipette 50.00mL ferric oxide standard stock solution (4.10), placed in 1L volumetric flask, dilute with water to volume, and mix. this […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 22660.7-2008

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 22660.7-2008

$85.00