GB/T 22660.2-2008Chemical analysis methods of lithium fluoride - Part 2: Determination of moisture content - By gravimetric method (English PDF)
氟化锂化学分析方法 第2部分：湿存水含量的测定 重量法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 22660.2-2008 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 29, 2008
Implementation date
November 1, 2009
Scope
GB/T 22660.2-2008 is the English-translated version of 氟化锂化学分析方法 第2部分：湿存水含量的测定 重量法.
GB/T 22660.2-2008 is the Chinese standard "Chemical analysis methods of lithium fluoride - Part 2: Determination of moisture content - By gravimetric method". Its scope clause reads: This section GB/T 22660 specifies the method for determination of lithium fluoride hygroscopic water.
This section applies to the determination of lithium fluoride in hygroscopic water. Measuring range. <=0.5%. Its clauses include method summary; instrument; sample.
Found what you need?
Document preview — GB/T 22660.2-2008
National Standard of the People's Republic of China
- ICS
- 77.120
- Classification
- H 60
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Method summary
- 4 Instrument
- 5 Sample
1 Scope
This section GB/T 22660 specifies the method for determination of lithium fluoride hygroscopic water.
This section applies to the determination of lithium fluoride in hygroscopic water. Measuring range. <=0.5%.
2 Normative references
The following documents contain provisions which, through reference GB/T 22660 in this section constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revised edition are not adapted to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated references, the latest edition of this adaptation section.
GB/T 22660.1-2008 Chemical analysis methods of lithium fluoride - Part 1. Sample Preparation and Storage
3 Method summary
The sample was dried at 110 °C and measuring the amount of loss.
4 Instrument
4.1 weighing bottle
diameter 45mm, flat.
4.2 electric oven
capable of controlling the temperature of 110 °C ± 5 °C.
5 Sample
The specimen shall comply with GB/T 22660.1-2008 in 3.2 requirements.
Step 6 Analysis
6.1 Sample
Weigh 2.0g of the original sample (5), referred to as m1 0, accurate to 0.001g.
6.2
Determination of the number of
Independently measured twice and averaged.
6.3 Determination
6.3.1
advance at 110 °C ± 5 °C in an electric oven (4.2) in the drying 2h, and cooled in a desiccator sample (6.1) into the weighing bottle (4.1), the lid was weighed (accurate to 0.001g), referred to as m1 2.
6.3.2
Place the sample weighing bottle (6.3.1) where the temperature was adjusted to 110 °C ± 5 °C in an electric oven, the lid of the bottle rack on top do not cover strict. At the same time placed in an oven with a diameter slightly larger than the weighing bottle table dish, bake 2h, remove the cap put on the table dish, and place all dry
Dry vessel. After cooling, remove the sheet pan, cap tightly, and weighed (accurate to 0.001g), referred to as m1.
7. Calculation of analytical results
According to formula (1) to calculate the mass fraction of water in the wet (%).
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 22660.2-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 22660.1-2008 — Chemical analysis methods of lithium fluoride - Part 1: Preparation and storage of test samples
GB/T 22660.3-2008 — Chemical analysis methods of lithium fluoride - Part 3: Determination of fluoride content - Distillation-thorium nitrate titration volumetric method
GB/T 22660.4-2008 — Chemical analysis methods of lithium fluoride - Part 4: Determiantion of magnesium content - Flame atomic absorption spectrometric method
Secure payment via Stripe
Payments accepted
GB/T 22660.2-2008
$75.00