Superseded

GB/T 22084.2-2008Secondary cells and batteries containing alkaline or other non-acid electrolytes -- Portable sealed rechargeable single cells -- Part 2: Nickel-metal hydride (English PDF)

含碱性或其他非酸性电解质的蓄电池和蓄电池组——便携式密封单体蓄电池 第2部分:金属氢化物镍电池

Preview PDF

This is a limited preview

Buy now to download the full PDF (29 pages)

Need quotation for your management?

Get a formal quotation for GB/T 22084.2-2008 in 30 minutes.

Issued by

General Administration of Quality Supervision, Inspection and Quarantine of the PRC

Level / Type

National · Recommended

Issue date

June 18, 2008

Implementation date

November 1, 2008

Scope

GB/T 22084.2-2008 is the English-translated version of 含碱性或其他非酸性电解质的蓄电池和蓄电池组——便携式密封单体蓄电池 第2部分:金属氢化物镍电池.

GB/T 22084.2-2008 is the Chinese standard "Secondary cells and batteries containing alkaline or other non-acid electrolytes -- Portable sealed rechargeable single cells -- Part 2: Nickel-metal hydride".

Its scope clause reads: This Part of GB/T 22084 specifies marking, designation, dimensions, tests and requirements for portable sealed nickel-metal hydride, small prismatic, cylindrical and button rechargeable single cells (abbreviated as cells), suitable for use in any orientation.

Found what you need?

Document preview — GB/T 22084.2-2008

National Standard of the People's Republic of China

ICS
29.220.10
Classification
K 82

Issued by: General Administration of Quality Supervision, Inspection and Quarantine of the PRC

Contents

  • Foreword3
  • 1 Scope5
  • 2 Normative references5
  • 3 Terms and definitions6
  • 4 Parameter measurement tolerances7
  • 5 Cell designation and marking7
  • 5.1 Cell designation7
  • 5.2 Cell termination9
  • 5.3 Marking10
  • 6 Dimensions11
  • 6.1 Small prismatic cells and cylindrical cells11
  • 6.2 Button cells12
  • 7 Electrical tests13
  • 7.1 Charging procedure for test purposes13
  • 7.2 Discharge performance14
  • 7.3 Charge (capacity) retention15
  • 7.4 Endurance16
  • 7.5 Charge acceptance at constant voltage21
  • 7.6 Overcharge21
  • 7.7 Safety device operation22
  • 7.8 Storage22
  • 7.9 Charge acceptance at 55 °C for LT, MT or HT cylindrical cells23
  • 7.10 Internal resistance24
  • 8 Mechanical tests26
  • 9 Type approval and batch acceptance26
  • 9.1 Type approval26
  • 9.2 Batch acceptance27
  • Bibliography29

1 Scope

This Part of GB/T 22084 specifies marking, designation, dimensions, tests and requirements for portable sealed nickel-metal hydride, small prismatic, cylindrical and button rechargeable single cells (abbreviated as cells), suitable for use in any orientation.

2 Normative references

The following documents contain provisions which, through reference in this

Part of GB/T 22084, constitute provisions of this Part. For the dated references, their subsequent amendments (excluding corrections) or revisions do not apply to this Part. However, the parties who enter into agreement based on this Part are encouraged to investigate whether the latest editions of these documents are applicable. For undated reference documents, the latest editions apply to this Part.

GB/T 7676 (all parts) Direct acting indicating analogue electrical measuring instruments and their accessories [IEC 60051 (all parts), IDT]

IEC 60050-486 International Electrotechnical Vocabulary - Chapter 486.

Secondary cells and batteries

IEC 60086 (all parts) Primary batteries

IEC 60410 Sampling plans and procedures for inspection by attributes

IEC 60485 Digital electronic d.c. voltmeters and d.c. electronic analogue-to- digital converters

IEC 61959 Secondary cells and batteries containing alkaline or other non- acid electrolytes - Mechanical tests for sealed portable secondary cells and batteries

GB/T 20042.6-2024 | GB/T 20042.7-2024 | GB/T 23751.2-2017 | GB 21966-2008 | GB 31656.25-2026 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 29 pages — is available in the English PDF.

Referenced standards

How to Download GB/T 22084.2-2008

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
29 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 22084.2-2008

$285.00