Valid

GB/T 21933.2-2008Ferronickel -- Determination of silicon content -- Gravimetric method (English PDF)

Preview PDF

Also coversGBT21933.2-2008

This is a limited preview

Buy now to download the full PDF (8 pages)

Need quotation for your management?

Get a formal quotation for GB/T 21933.2-2008 in 30 minutes.

Issued by

General Administration of Quality Supervision, Inspection and Quarantine of the PRC

Level / Type

National · Recommended

Issue date

May 30, 2008

Implementation date

December 1, 2008

Scope

GB/T 21933.2-2008 (Ferronickel -- Determination of silicon content -- Gravimetric method) is available as an English-translated PDF.

GB/T 21933.2-2008 — This Part of GB/T 21933 specifies the gravimetric method for the determination of silicon content in ferronickel. This Part applies to the determination of silicon content in ferronickel. The determination range (mass fraction): 0.2%~4.0%.

Found what you need?

Document preview — GB/T 21933.2-2008

National Standard of the People's Republic of China

ICS
77.100
Classification
H 11

Issued by: General Administration of Quality Supervision, Inspection and Quarantine of the PRC

Contents

  • Foreword...3
  • 1 Scope...4
  • 2 Normative references...4
  • 3 Principle...4
  • 4 Reagents and materials...5
  • 5 Apparatus...5
  • 6 Sampling and preparation of samples...5
  • 7 Analytical procedure...6
  • 8 Expression of results...7
  • 9 Test report...8

Foreword

This Part of GB/T 21933 modifies and adopts ISO 8343:1985 "Ferronickel -

Determination of silicon content - Gravimetric method".

Compared with ISO 8343:1985, the main technical differences in this Part are

as follows:

a) Delete 7.1.3;

b) CHANGE "silicon content is 0.25%~1%..." in 7.1.2 to "silicon content is

0.20%~1%...";

c) CHANGE "to the nearest 0.001 g" in 7.1.1 and "to the nearest 0.002 g" in

7.1.2 TO "to the nearest 0.0001 g";

d) CORRECT the conversion factor "0.467" in the 8.1 calculation formula to

"0.4674";

e) Adopt national standards as normative references.

This Part was proposed by China Iron and Steel Association.

This Part shall be under the jurisdiction of China Metallurgical Information and

Standardization Institute.

Drafting organization of this Part: Shanxi Taigang Stainless Steel Co., Ltd.

Main drafters of this Part: Dai Xueqian, Zhao Yongxian, Liu Aikun.

Ferronickel - Determination of silicon content -

Gravimetric method

WARNING: The personnel using this Part shall have practical experience

in regular laboratory work. This Part does not point out all possible safety

problems. It is the responsibility of the user to take appropriate safety and

health measures and to ensure compliance with the conditions stipulated

by relevant national regulations.

1 Scope

This Part of GB/T 21933 specifies the gravimetric method for the determination

of silicon content in ferronickel.

This Part applies to the determination of silicon content in ferronickel. The

determination range (mass fraction): 0.2%~4.0%.

2 Normative references

The following documents contain provisions which, through reference in this

Part of GB/T 21933, constitute provisions of this Part. For the dated references,

their subsequent amendments (excluding corrections) or revisions do not apply

to this Part. However, the parties who enter into agreement based on this Part

are encouraged to investigate whether the latest editions of these documents

are applicable. For undated reference documents, the latest editions apply to

this Part.

GB/T 6379.1 Accuracy (trueness and precision) of measurement methods

and results - Part 1: General principles and definitions (GB/T 6379.1-2004,

ISO 5725-1:1994, IDT)

GB/T 6379.2 Accuracy (trueness and precision) of measurement methods

and results - Part 2: Basic method for the determination of repeatability and

reproducibility of a standard measurement method (GB/T 6379.2-2004, ISO

5725-2:1994, IDT)

3 Principle

Dissolution of a test portion in nitric acid. Add perchloric acid to evaporate and

smoke to dehydrate silicic acid to produce insoluble silica. Filter and weigh the

......

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 8 pages — is available in the English PDF.

Referenced standards

Normative references

GB/T 21933 · GB/T 6379.1 · GB/T 6379.1-2004 · ISO 5725 · GB/T 6379.2 · GB/T 6379.2-2004

How to Download GB/T 21933.2-2008

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
8 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 21933.2-2008

$75.00