GB/T 21468-2008Pallet stackers and high-lift platform trucks -- Stability tests (English PDF)

Foreword

This standard is identical with ISO 5766:1990 "Pallet stackers and high-lift pallet truck stability test" (in English).

This standard is equivalent translation ISO 5766:1990.

For ease of use, this standard made the following editorial changes.

--- "This International Standard" be replaced by "this standard";

--- Instead of using the decimal point as a decimal point ",". ",";

--- Deleted international standards foreword;

--- Removed all imperial units corresponding values, formulas and notes.

The standard proposed by China Machinery Industry Federation.

This standard is under the jurisdiction of Beijing Materials Handling Research Institute.

1 Scope

This standard specifies the basic walk-test verification and ride pallet stackers and high-lift pallet truck stability.

This standard applies to the rated capacity of not more than 5000kg, door frame, loading platforms, forks can be tilted or not tilted stacking and transport vehicle Transport vehicles. Also applies to work under the same conditions of load handling attachments equipped vehicles.

This standard does not apply to vehicles with a telescopic device (such as a door frame or fork), and does not apply to handling can swing freely suspended load Dutch vehicles.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB/T 8591 moving machinery - Seat index point (GB/T 8591-2000, eqv ISO 5353:1995)

3 Test purposes

4 Stability Test