GB/T 20975.33-2020Methods for chemical analysis of aluminium and aluminium alloys—Part 33: Determination of potassium content—Flame atomic absorption spectrometric method (English PDF)
铝及铝合金化学分析方法 第33部分:钾含量的测定 火焰原子吸收光谱法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 20975.33-2020 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 19, 2020
Implementation date
October 1, 2021
Scope
GB/T 20975.33-2020 is the English-translated version of 铝及铝合金化学分析方法 第33部分:钾含量的测定 火焰原子吸收光谱法.
GB/T 20975.33-2020 is the part of the Chinese series on the chemical analysis of aluminium and aluminium alloys that determines the potassium content. It gives the flame atomic absorption spectrometric method, for 0.0010 % to 1.00 % potassium.
It applies to the arbitration determination of potassium in aluminium and aluminium alloys. Aluminium producers and analytical laboratories use it. Issued on 19 November 2020, it has applied since 1 October 2021.
Found what you need?
Document preview — GB/T 20975.33-2020
National Standard of the People's Republic of China
- ICS
- 77.120.10
- Classification
- H 12
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Method summary
- 5 Reagents
Foreword
GB/T 20975 "Methods for Chemical Analysis of Aluminum and Aluminum Alloys" is divided into 37 parts.
---Part 1: Determination of mercury content;
---Part 2: Determination of arsenic content;
---Part 3: Determination of copper content;
---Part 4: Determination of iron content;
---Part 5: Determination of silicon content;
---Part 6: Determination of cadmium content;
---Part 7: Determination of manganese content;
---Part 8: Determination of zinc content;
---Part 9: Determination of lithium content by flame atomic absorption spectrometry;
---Part 10: Determination of tin content;
---Part 11: Determination of lead content;
---Part 12: Determination of titanium content;
---Part 13: Determination of vanadium content;
---Part 14: Determination of nickel content;
---Part 15: Determination of boron content;
---Part 16: Determination of magnesium content;
---Part 17: Determination of strontium content;
---Part 18: Determination of Chromium Content;
---Part 19: Determination of Zirconium Content;
---Part 20: Determination of Gallium Content Butyl Rhodamine B Spectrophotometry;
---Part 21: Determination of calcium content;
---Part 22: Determination of beryllium content;
---Part 23: Determination of antimony content;
---Part 24: Determination of total rare earth content;
---Part 25: Determination of element content by inductively coupled plasma atomic emission spectrometry;
---Part 26: Determination of carbon content by infrared absorption method;
---Part 27: Determination of cerium, lanthanum and scandium content by inductively coupled plasma atomic emission spectrometry;
---Part 28: Determination of cobalt content by flame atomic absorption spectrometry;
---Part 29: Determination of molybdenum content thiocyanate spectrophotometric method;
---Part 30: Determination of hydrogen content by heating extraction thermal conductivity method;
---Part 31: Determination of phosphorus content molybdenum blue spectrophotometry;
---Part 32: Determination of Bismuth Content;
---Part 33: Determination of potassium content by flame atomic absorption spectrometry;
---Part 34: Determination of sodium content by flame atomic absorption spectrometry;
---Part 35: Determination of Tungsten Content Thiocyanate Spectrophotometric Method;
---Part 36: Determination of silver content by flame atomic absorption spectrometry;
--- Part 37: Determination of Niobium Content.
This part is part 33 of GB/T 20975.
This section was drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This part of GB/T 20975 specifies the flame atomic absorption spectrometry to determine the potassium content in aluminum and aluminum alloys.
This section applies to the arbitration determination of potassium content in aluminum and aluminum alloys. Measuring range. 0.0010%~1.00%.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this document. For undated references, the latest version (including all amendments) applies to this document.
GB/T 8005.2 Terminology of Aluminum and Aluminum Alloy Part 2: Chemical Analysis
GB/T 8170-2008 Numerical rounding rules and the expression and determination of limit values
3 Terms and definitions
The terms and definitions defined in GB/T 8005.2 apply to this document.
4 Method summary
The sample is dissolved in hydrochloric acid and hydrogen peroxide, cesium chloride is added as an ionization inhibitor, and an air-acetylene flame is used in the flame atomic absorption spectrometry At the wavelength of 766.5nm, the absorbance of potassium is measured to determine the potassium content.
5 Reagents
Unless otherwise specified, only reagents and laboratory grade water confirmed to be pure superior grade are used in the analysis.
5.1 Pure aluminum (wAl>=99.99%, wK<=0.0005%).
5.2 Hydrogen peroxide (rho=1.10g/mL).
5.3 Hydrochloric acid (11) (prepared with high-purity reagent BVIII grade hydrochloric acid).
5.4 Cesium chloride solution (25g/L). Weigh 2.5g of cesium chloride (spectrally pure), dissolve it in 100mL of water, and mix.
5.5 Aluminum solution (20mg/mL). Weigh 20.000g pure aluminum (5.1) in a 500mL PTFE beaker, cover with a watch glass, and add Into the total amount of 600mL hydrochloric acid (5.3), slowly heat until completely dissolved, and cool. Transfer the solution into a 1000mL volumetric flask and dilute with water to Scale and mix well.
5.6 Potassium standard storage solution. Weigh 1.9068g reference potassium chloride (preliminarily burned at 450°C~500°C for 1.5h~2h and put it in a desiccator Cooled to room temperature) dissolved in a 300mL beaker, transferred to a 1000mL volumetric flask, diluted to the mark with water, and mixed. Store in dry […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 20975.33-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 8005.2-2011 — Terms of aluminium and aluminium alloys -- Part 2: Chemical analysis
GB/T 8170-2008 — Rules of rounding off for numerical values & expression and judgement of limiting values
GB/T 20975.34-2020 — Methods for chemical analysis of aluminium and aluminium alloys—Part 34: Determination of sodium content—Flame atomic absorption spectrometric method
GB/T 20975.33-2020
$90.00