GB/T 20245.5-2013Expression of performance of electrochemical analyzers -- Part 5: Oxidation-reduction potential or redox potential (English PDF)

Foreword

GB/T 20245 "performance of electrochemical analyzers" is divided into the following five sections.

--- Part 1. General;

Part --- Article 2. pH value;

--- Part 3. electrolyte conductivity;

--- Part 4. using coated current sensor measurement of dissolved oxygen;

--- Part 5. redox potential.

This section GB/T 20245 Part 5.

This section drafted in accordance with the rules of GB/T 1.1-2009 and GB/T 20000.2-2009 given.

This section uses the translation method is equivalent to using IEC 60746-5:1992 "performance of electrochemical analyzers - Part 5. redox Potential. " for ease of use, this section made the following editorial changes.

--- GB/T 20245.5 standard text used in "this part of GB/T 20245 of" instead of "IEC 60746 Part of the present";

--- Decimal symbol used in place of ",". ",";

--- Remove the foreword to international standards.

Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents.

This part is proposed by China Machinery Industry Federation.

This part of the measurement and control of Standardization Technical Committee (SAC/TC124) is administered by the National industrial processes.

This section drafted by. China Instrument Industry Association, Sichuan-Chongqing Analytical Instruments Co., Ltd., Shanghai Electronics Shares have scientific instruments Limited, China Institute of Metrology, Hailei magnetic sensor Technology Co., Ltd., Shanghai Measurement and Testing Technology Research Institute, Beijing metering Detection Research Institute, Hangzhou condensing Environmental Protection Technology Co., Beijing Analytical Instrument Institute.

1 Scope

This section GB/T 20245 specifies the manufacturer describes an aqueous solution for the determination of the value of the oxidation-reduction potential analyzer, sensor unit the term elements and electronic units, definitions and requirements, as well as the performance of such test analyzer, sensor unit and electronic unit.

This section applies to an inert conductive electrode measured oxidation reduction potential value of an aqueous solution of analyzers, sensors and electronic units.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 20245.1-2006 performance of electrochemical analyzers represent - Part 1. General (IEC 60746.1:2003, IDT)

3 Symbols, terms and definitions