GB/T 19889.10-2006Acoustics -- Measurement of sound insulation in buildings and of building elements -- Part 10: Laboratory measurements of airborne sound insulation of small building elements (English PDF)
声学 建筑和建筑构件隔声测量 第10部分：小建筑构件空气声隔声的实验室测量
This is a limited preview
Buy now to download the full PDF (7 pages)
Need quotation for your management?
Get a formal quotation for GB/T 19889.10-2006 in 30 minutes.
Issued by
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Level / Type
National · Recommended
Issue date
July 25, 2006
Implementation date
December 1, 2006
Scope
GB/T 19889.10-2006 is the English-translated version of 声学 建筑和建筑构件隔声测量 第10部分：小建筑构件空气声隔声的实验室测量.
GB/T 19889.10-2006 — This standard gives the following small building elements in the diffuse sound field conditions Laboratory measurements of airborne sound insulation methods.
Measurement results can be used to guide the development of an appropriate sound insulation of building elements, but also according to the measurement results for these components were graded according to their acoustic performance and assessing such structural components for building wall insulation effect.
This section is intended is the area less than a square, and the lateral scales to determine the various building components, but does not include doors and windows.
These building elements in the two adjacent rooms, or between a separate room with adjacent building body sound transmission between the outdoor space. For example, some of the equipment in this section are as follows: ventilation equipment, vents (air conditioners), Outdoor air inlet, electrical conduit (cable duct), transmission sealing system.
Found what you need?
Document preview — GB/T 19889.10-2006
National Standard of the People's Republic of China
- ICS
- 91.120.30
- Classification
- A 59
Issued by: General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Contents
- What this standard covers1
- Document data2
- Standards quoted by this document3
What this standard covers
This standard gives the following small building elements in the diffuse sound field conditions Laboratory measurements of airborne sound insulation methods. Measurement results can be used to guide the development of an appropriate sound insulation of building elements, but also according to the measurement results for these components were graded according to their acoustic performance and assessing such structural components for building wall insulation effect. This section is intended is the area less than a square, and the lateral scales to determine the various building components, but does not include doors and windows. These building elements in the two adjacent rooms, or between a separate room with adjacent building body sound transmission between the outdoor space. For example, some of the equipment in this section are as follows: ventilation equipment, vents (air conditioners), Outdoor air inlet, electrical conduit (cable duct), transmission sealing system. This method is not used to measure the composition unit component parts, component parts related because sound transmission may depend on the interaction between the various components.
Document data
International classification (ICS): 91.120.30.
Chinese classification (CCS): A59.
Estimated length of the Chinese original: 10,193 words.
Adopted international standard: ISO 140-10-1991, IDT.
Standards quoted by this document
GB/T 19889.1-2005; GB/T 19889.3-2005; GB/T 50121-2005
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 7 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 31004.1-2014Acoustics -- Measurement of sound insulation in buildings and of building elements using sound intensity -- Part 1: Laboratory measurements
- GB/T 31004.2-2014Acoustics -- Measurement of sound insulation in buildings and of building elements using sound intensity -- Part 2: Field measurements
- GB/T 31004.3-2014Acoustics -- Measurement of sound insulation in buildings and of building elements using sound intensity -- Part 3: Laboratory measurements at low frequencies
- JG/T 233-2008Ventilator for windows and doors of building
How to Download GB/T 19889.10-2006
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 19889.1-2026 — Acoustics—Field measurement of sound insulation in buildings and of building elements—Part 1: Airborne sound insulation between rooms
GB/T 19889.1-2005 — Acoustics -- Measurement of sound insulation in buildings and of building elements -- Part 1: Requirements for laboratory test facilities with suppressed flanking transmission
GB/T 19889.14-2010 — Acoustics -- Measurement of sound insulation in buildings and of building elements -- Part 14: Guidelines for special situations in the field
Secure payment via Stripe
Payments accepted
GB/T 19889.10-2006
$179.00