GB/T 19769.3-2012Function block for industrial-process measurement and control systems -- Part 3: Tutorial information (English PDF)

Foreword

GB/T 19769 "industrial process measurement and control systems function block" is divided into the following sections.

--- Part 1. Structure;

--- Part 2. Software tools requirements;

--- Part 3. Guidance information;

--- Part 4. Application Profile Guidelines.

This section GB/T 19769 Part 3.

This section identical with IEC 61499-3:2004 "industrial process measurement and control systems Function blocks - Part 3. Guidance Information" (English Chinese Version).

This section drafted in accordance with GB/T 1.1-2009 given rules.

This section according to GB/T 1.1-2009 to IEC 61499-3:2004 made the following editorial changes.

--- Remove the IEC 61499-3:2004 foreword, preface rewritten this section;

--- Where "IEC 61499" where to "GB/T 19769";

--- With a decimal point "." Instead of a comma as the decimal point, "."

--- According to Chinese customs for some formatting has been modified;

--- Some of the statements apply to international standards to apply to our standard formulation.

Appendix A of this section and Appendix B is an informative annex.

This part is proposed by China Machinery Industry Federation.

This part of the measurement and control of Standardization Technical Committee (SAC/TC124) is administered by the National industrial processes.

Introduction

The following shows the GB/T 19769 describes the various parts of the content.

a) The first part

- General requirements, including introduction, scope, normative references, definitions and reference model;

- defined function block types of rules, rules type declaration of an instance of behavior;

- Rule Function blocks in distributed industrial process measurement and control systems (IPMCS) used in the configuration;

- function blocks to meet the communication needs rules distributed IPMCS used;

- Rule Function block IPMCS managing distributed applications, resources and equipment used.

b) Part 2 defines the requirements for the software tools to support the following systems engineering tasks GB/T 19769.1 1.1 listed.

- normative function block type;

- resource type and specification of the type of equipment;

- Distributed IPMCS specification analysis and verification;

- Distributed IPMCS configuration, implementation, operation and maintenance;

- information exchange software tools.

Objective c) of Part 3 is to promote understanding and reception, and the promotion of common areas IPMCS structure of a particular application, and promote soft Shipping Tools meet the needs of other parts, by providing.

- Frequently Asked Questions about GB/T 19769 answers (FAQ);

- Use GB/T 19769 structural example of control and automation engineering to solve problems frequently encountered.

d) Section 4 defines conformance profiles of development guidelines, the need to implement the provisions of GB/T 19769.1 and GB/T 19769.2 Features to provide based on the following properties GB/T 19769 systems, equipment and software tools.

- multiple providers of equipment interoperability;

- software portability between multiple providers of software tools;

- over a provider of software tools for over a provider of the device configurable.

Industrial process measurement and control systems function blocks Part 3. Guidance Information

1 Scope

This section provides a technical report, intended to provide a simple method for the expression of a wide range of applications in the field of common features. In a it can be considered a "language" kind of degree. It should be noted, GB/T 19769 is not a programming method.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) used in the present document.

GB/T 15969.3-2005 programmable controllers Part 3. programming languages \u200b\u200b(IEC 61131-3:2002, IDT) GB/T 21099.1-2007 process control function blocks - Part 1. System aspects Subjects (IEC/CDV61804-1.

2003, IDT)

GB/T 21099.2-2007 Part 2 process control function blocks. Function Block concept and electronic device description language specification (IEC/CDV61804-2.2003, IDT)

3 Frequently Asked Questions