GB/T 19510.213-2023Controlgear for electric light sources - Part 2-13: Particular requirements for d. c. or a. c. supplied electronic controlgear for LED modules (English PDF)

Foreword

This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents" Drafting.

This document is Part 2-13 of GB/T 19510 "Light Source Control Device". GB/T 19510 has published the following parts.

---Part 1. General requirements and safety requirements;

---Part 2-1. Special requirements for starting devices (except glow starters);

---Part 2-2. Special requirements for DC/AC electronic buck converters for tungsten lamps;

---Part 2-3. Special requirements for AC and/or DC electronic control devices for fluorescent lamps;

---Part 2-7. Special requirements for electronic control devices powered by safety service power supply (ESSS) for emergency lighting (self-contained);

---Part 2-8. Special requirements for ballasts for fluorescent lamps;

---Part 2-9. Special requirements for electromagnetic control devices for discharge lamps (except fluorescent lamps);

---Part 2-10. Special requirements for electronic inverters and frequency converters for high-frequency cold start tubular discharge lamps (neon lamps);

---Part 2-11. Special requirements for miscellaneous electronic circuits used with lamps;

---Part 2-12. Special requirements for DC or AC electronic ballasts for discharge lamps (except fluorescent lamps);

---Part 2-13. Special requirements for DC or AC electronic control devices for LED modules.

This document replaces GB 19510.14-2009 "Lamp control devices - Part 14: DC or AC electronic control devices for LED modules" "Special Requirements for Installation", compared with GB 19510.14-2009, in addition to structural adjustments and editorial changes, the main technical changes are as follows:

---Changed the content in the general requirements (see Chapter 4, Chapter 4 of GB 19510.14-2009);

---Changed the mandatory marking provisions (see 7.1, 7.1 of GB 19510.14-2009).

This document is modified to adopt IEC 61347-2-13:2016 "Lamp control devices Part 2-13. DC or AC electronics for LED modules" Special Requirements for Control Devices".

Compared with IEC 61347-2-13:2016, this document has made the following structural adjustments.

---Appendix A corresponds to Appendix I in IEC 61347-2-13:2016;

---Appendix B corresponds to Appendix C in IEC 61347-2-13:2016;

---Appendix C corresponds to Appendix A in IEC 61347-2-13:2016;

---Appendix D corresponds to Appendix B in IEC 61347-2-13:2016;

---Appendix E corresponds to Appendix D in IEC 61347-2-13:2016;

---Appendix F corresponds to Appendix E in IEC 61347-2-13:2016;

---Appendix G corresponds to Appendix F in IEC 61347-2-13:2016;

---Appendix H corresponds to Appendix G in IEC 61347-2-13:2016;

---Appendix I corresponds to Appendix H in IEC 61347-2-13:2016.

The technical differences between this document and IEC 61347-2-13:2016 and their reasons are as follows:

---Replaced IEC 61347-1:2007 with normatively cited GB/T 19510.1-2023 to adapt to my country's technical conditions and increase Increase operability. The following editorial changes have been made to this document.

---In order to coordinate with the existing standards, the name of the standard is changed to "Light source control device - Part 2-13. DC or AC for LED modules" Special requirements for electronic control devices";

---Replaced IEC 61347-2-7 with the informative reference GB/T 19510.207-2023 (see Appendix J).

Introduction

With the development of light source control device technology, the safety specifications of the previous version of the light source control device can no longer be adapted to meet the current light source control requirements.

Technical requirements and product safety requirements of the device. Safety requirements ensure that electrical equipment is correctly installed, maintained and used in the manner intended Reduce harm to people, livestock or property. GB/T 19510 "Light Source Control Device" updates the technical and safety requirements to the regulations.

It is of great significance to standardize light source control devices, reduce product safety risks, improve product quality, and enhance the competitiveness of our products.

GB/T 19510 aims to standardize light source control devices and is intended to consist of the following parts.

---Part 1. General requirements and safety requirements. The purpose is to standardize the general requirements for control devices and their safety requirements.

---Part 2-1. Special requirements for starting devices (except glow starters). The purpose is to standardize starting devices (except glow starters) (external) special requirements for safety requirements.

---Part 2-2. Special requirements for DC/AC electronic step-down converters for tungsten lamps. The purpose is to standardize the direct use of tungsten filament lamps Special requirements for safety requirements of current/AC electronic buck converters.

---Part 2-3. Special requirements for AC and/or DC electronic control devices for fluorescent lamps. The purpose is to standardize AC for fluorescent lamps and/or special requirements for safety requirements of DC electronic control devices.

---Part 2-7. Special requirements for electronic control devices powered by safety service power supplies (ESSS) for emergency lighting (self-contained). Purpose Special requirements for regulating the safety requirements of electronic control devices powered by safety service power supplies (ESSS) for emergency lighting (self-contained).

---Part 2-8. Special requirements for ballasts for fluorescent lamps. The purpose is to standardize special safety requirements for ballasts for fluorescent lamps. Require.

---Part 2-9. Special requirements for electromagnetic control devices for discharge lamps (except fluorescent lamps). The purpose is to standardize discharge lamps (fluorescent lamps Except) special requirements for safety requirements for electromagnetic control devices.

---Part 2-10. Special requirements for electronic inverters and frequency converters for high-frequency cold start tubular discharge lamps (neon lamps). The purpose is Special requirements for regulating the safety requirements of electronic inverters and frequency converters for high-frequency cold start tubular discharge lamps (neon lamps).

---Part 2-11. Special requirements for miscellaneous electronic circuits used with lamps. The purpose is to standardize miscellaneous electronics used in conjunction with lamps Special requirements for line safety requirements.

---Part 2-12. Special requirements for DC or AC electronic ballasts for discharge lamps (except fluorescent lamps). The purpose is to regulate discharge Special requirements for the safety of DC or AC electronic ballasts for lamps (other than fluorescent lamps).

---Part 2-13. Special requirements for DC or AC electronic control devices for LED modules. The purpose is to standardize the use of LED modules Special requirements for safety requirements for DC or AC electronic control devices.

This document is used together with GB/T 19510.1, which is revised after supplementing or modifying the corresponding provisions of GB/T 19510.1 made. This document and GB/T 19510.201~GB/T 19510.213 stipulate this when citing any clause of GB/T 19510.1.

The scope of application of the clauses and the test sequence of each test are specified, and necessary supplementary requirements are specified. Each part of GB/T 19510 is independent Established without reference to each other to facilitate future revisions and revisions. If deemed necessary, new requirements will be added.

1 Scope

This document specifies electronic control devices for LED modules powered by not more than 1000V DC or AC (50Hz or 60Hz)

(hereinafter referred to as "control device"), the output frequency of the electronic control device may be different from the power frequency.

The control device for LED modules specified in this document is designed to provide LED modules with safe extra-low voltage or higher voltage.

A control device that provides constant voltage or current. Control devices of non-pure voltage source and current source types are also covered by this document.

The appendix of GB/T 19510.1-2023 applicable to this document and the term "light source" used are understood to also include LED modules.

Special requirements for safety extra-low voltage control devices are given in Appendix A. See IEC 62384 for performance requirements.

As part of a luminaire, plug-in controls are similar to built-in controls, and the luminaire standard contains additional requirements.

2 Normative reference documents

The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document.

GB/T 19510.1-2023 Light source control device Part 1: General requirements and safety requirements (IEC 61347-1:2017, MOD)

Note: GB/T 18595-2014 Electromagnetic compatibility and immunity requirements for general lighting equipment (IEC 61547:2009, IDT)

Note: GB/T 19212 (all parts) Safety of transformers, reactors, power supply units and their combinations [IEC 61558 (all parts)]

IEC 62384:2020 Performance specification for DC or AC electronic control devices for LED modules (DCorACsupplied Note 1. There is no technical difference between the quoted content of IEC 62384:2020 and the quoted content of IEC 62384:2006.

Note 2. GB/T 24825-2022 Performance specifications for DC or AC electronic control devices for LED modules (IEC 62384:2020, MOD)

3 Terms and definitions

The following terms and definitions as defined in GB/T 19510.1-2023 apply to the document