GB/T 19510.209-2023Controlgear for electric light sources - Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps(excluding fluorescent lamps) (English PDF)

Foreword

This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents" Drafting:

This document is Part 2-9 of GB/T 19510 "Light Source Control Device": GB/T 19510 has published the following parts:

---Part 1: General requirements and safety requirements;

---Part 2-1: Special requirements for starting devices (except glow starters);

---Part 2-2: Special requirements for DC/AC electronic buck converters for tungsten lamps;

---Part 2-3: Special requirements for AC and/or DC electronic control devices for fluorescent lamps;

---Part 2-7: Special requirements for electronic control devices powered by safety service power supply (ESSS) for emergency lighting (self-contained);

---Part 2-8: Special requirements for ballasts for fluorescent lamps;

---Part 2-9: Special requirements for electromagnetic control devices for discharge lamps (except fluorescent lamps);

---Part 2-10: Special requirements for electronic inverters and frequency converters for high-frequency cold start tubular discharge lamps (neon lamps);

---Part 2-11: Special requirements for miscellaneous electronic circuits used with lamps;

---Part 2-12: Special requirements for DC or AC electronic ballasts for discharge lamps (except fluorescent lamps);

---Part 2-13: Special requirements for DC or AC electronic control devices for LED modules:

This document replaces GB 19510.10-2009 "Lamp control devices - Part 10: Characteristics of ballasts for discharge lamps (except fluorescent lamps)" "Special Requirements", compared with GB 19510.10-2009, in addition to structural adjustments and editorial changes, the main technical changes are as follows:

---Added general requirements for heating of electromagnetic control devices (see Chapter 14);

---Change "ballast" to "electromagnetic control device":

This document is modified to adopt IEC 61347-2-9:2012 "Lamp control devices - Part 2-9: Electromagnetic control for discharge lamps (except fluorescent lamps)" Special requirements for control devices:

Compared with IEC 61347-2-9:2012, this document has made the following structural adjustments:

---Appendix A corresponds to Appendix B in IEC 61347-2-9:2012;

---Appendix B corresponds to Appendix H in IEC 61347-2-9:2012;

---Appendix C corresponds to Appendix E in IEC 61347-2-9:2012;

---Appendix D corresponds to Appendix I in IEC 61347-2-9:2012;

---Appendix E corresponds to Appendix A in IEC 61347-2-9:2012;

---Appendix F corresponds to Appendix C in IEC 61347-2-9:2012;

---Appendix G corresponds to Appendix D in IEC 61347-2-9:2012;

---Appendix H corresponds to Appendix F in IEC 61347-2-9:2012;

---Appendix I corresponds to Appendix G in IEC 61347-2-9:2012:

The technical differences between this document and IEC 61347-2-9:2012 and their reasons are as follows:

---Replaced IEC 61347-1:2007 with normatively cited GB/T 19510.1-2023 to adapt to my country's technical conditions and increase Increase operability;

---Replaced IEC 62035 (see 14.4) with normatively cited GB/T 19652-2023 to adapt to my country's technical conditions and increase Increase operability:

The following editorial changes have been made to this document:

---In order to coordinate with the existing standards, the name of the standard is changed to "Light source control device - Part 2-9: Electricity consumption of discharge lamps (except fluorescent lamps)" Special requirements for magnetic control devices";

---Replaced IEC 61347-2-8 with the informative reference GB/T 19510.208-2023 (see Chapter 1);

---Replaced IEC 61347-2-1 with the informative reference GB/T 19510.201-2023 (see 7.2);

---Replaced IEC 60598-1 with the informative reference GB/T 7000.1-2023 (see 14.4);

---Replaced IEC 60317-0-1 (see Chapter 18) with the informative reference IEC 60317-0-1:2019:

Please note that some content in this document may be subject to patents: The publisher of this document assumes no responsibility for identifying patents:

Introduction

With the development of light source control device technology, the safety specifications of the previous version of the light source control device can no longer be adapted to meet the current light source control requirements:

Technical requirements and product safety requirements of the device: Safety requirements ensure that electrical equipment is correctly installed, maintained and used in the manner intended Reduce harm to people, livestock or property: GB/T 19510 "Light Source Control Device" updates the technical and safety requirements to the regulations:

It is of great significance to standardize light source control devices, reduce product safety risks, improve product quality, and enhance the competitiveness of our products:

GB/T 19510 aims to standardize light source control devices and is intended to consist of the following parts:

---Part 1: General requirements and safety requirements: The purpose is to standardize the general requirements for control devices and their safety requirements:

---Part 2-1: Special requirements for starting devices (except glow starters): The purpose is to standardize starting devices (except glow starters) (external) special requirements for safety requirements:

---Part 2-2: Special requirements for DC/AC electronic step-down converters for tungsten lamps: The purpose is to standardize the direct use of tungsten filament lamps Special requirements for safety requirements of current/AC electronic buck converters:

---Part 2-3: Special requirements for AC and/or DC electronic control devices for fluorescent lamps: The purpose is to standardize AC for fluorescent lamps and/or special requirements for safety requirements of DC electronic control devices:

---Part 2-7: Special requirements for electronic control devices powered by safety service power supplies (ESSS) for emergency lighting (self-contained): Purpose Special requirements for regulating the safety requirements of electronic control devices powered by safety service power supplies (ESSS) for emergency lighting (self-contained):

---Part 2-8: Special requirements for ballasts for fluorescent lamps: The purpose is to standardize special safety requirements for ballasts for fluorescent lamps:

Require:

---Part 2-9: Special requirements for electromagnetic control devices for discharge lamps (except fluorescent lamps): The purpose is to standardize discharge lamps (fluorescent lamps Except) special requirements for safety requirements for electromagnetic control devices:

---Part 2-10: Special requirements for electronic inverters and frequency converters for high-frequency cold start tubular discharge lamps (neon lamps): The purpose is Special requirements for regulating the safety requirements of electronic inverters and frequency converters for high-frequency cold start tubular discharge lamps (neon lamps):

---Part 2-11: Special requirements for miscellaneous electronic circuits used with lamps: The purpose is to standardize miscellaneous electronics used in conjunction with lamps Special requirements for line safety requirements:

---Part 2-12: Special requirements for DC or AC electronic ballasts for discharge lamps (except fluorescent lamps): The purpose is to regulate discharge Special requirements for the safety of DC or AC electronic ballasts for lamps (other than fluorescent lamps):

---Part 2-13: Special requirements for DC or AC electronic control devices for LED modules: The purpose is to standardize the use of LED modules Special requirements for safety requirements for DC or AC electronic control devices:

This document is used together with GB/T 19510.1, which is revised after supplementing or modifying the corresponding provisions of GB/T 19510.1 made: This document and GB/T 19510.201~GB/T 19510.213 stipulate this when citing any clause of GB/T 19510.1:

The scope of application of the clauses and the test sequence of each test are specified, and necessary supplementary requirements are specified: Each part of GB/T 19510 is independent Established without reference to each other to facilitate future revisions and revisions: If deemed necessary, new requirements will be added:

Light source control devices Part 2-9: Discharge lamps Special requirements for electromagnetic control devices (except fluorescent lamps)

1 Scope

This document specifies special safety requirements for electromagnetic control devices for discharge lamps such as high-pressure mercury lamps, low-pressure sodium lamps, high-pressure sodium lamps and metal halide lamps:

Require:

This document is applicable to inductive electromagnetic control devices used on AC power supplies of 50Hz or 60Hz below 1000V and matched with them:

The rated power, dimensions and characteristics of discharge lamps are specified by IEC 60188 or IEC 60192 or IEC 60662:

This document applies to complete electromagnetic control devices and their components, such as reactors, transformers, capacitors, etc: Appendix A gives the thermal protection Special requirements for electromagnetic control devices:

For some types of discharge lamps, a trigger is required:

Note: The electromagnetic control device for fluorescent lamps is specified in GB/T 19510.208-2023:

See IEC 60923 for performance requirements:

2 Normative reference documents

The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, the dated quotations for undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document:

GB/T 19510.1-2023 Light source control device Part 1: General requirements and safety requirements (IEC 61347-1:2017, MOD) GB/T 19652-2023 Safety specifications for discharge lamps (except fluorescent lamps) (IEC 62035:2016, MOD)

3 Terms and definitions

The terms and definitions defined in GB/T 19510.1-2023 and the following apply to this document:

deltat

Temperature rise determined by the manufacturer under the conditions specified in this document:

Note: See Appendix B for the power requirements and installation conditions of the electromagnetic control device:

high-voltageimpulse

An intentionally applied non-periodic instantaneous voltage that, when applied, usually rises rapidly to a peak value and then slowly falls to zero:

Note 1: There is a difference between the term "pulse" and "surge", the latter refers to the transient phenomenon generated during the use of electrical equipment or power grids:

Note 2: This kind of pulse is generally expressed by the sum of two indices:

4 General requirements

4.1 General

In accordance with Chapter 4 of GB/T 19510.1-2023 and the following requirements: