GB/T 19510.208-2023Controlgear for electric light sources - Part 2-8: Particular requirements for ballasts for fluorescent lamps (English PDF)

Foreword

This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents" Drafting:

This document is Part 2-8 of GB/T 19510 "Light Source Control Device": GB/T 19510 has released the following parts:

---Part 1: General requirements and safety requirements;

---Part 2-1: Special requirements for starting devices (except glow starters);

---Part 2-2: Special requirements for DC/AC electronic buck converters for tungsten lamps;

---Part 2-3: Special requirements for AC and/or DC electronic control devices for fluorescent lamps;

---Part 2-7: Special requirements for electronic control devices powered by safety service power supply (ESSS) for emergency lighting (self-contained);

---Part 2-8: Special requirements for ballasts for fluorescent lamps;

---Part 2-9: Special requirements for electromagnetic control devices for discharge lamps (except fluorescent lamps);

---Part 2-10: Special requirements for electronic inverters and frequency converters for high-frequency cold start tubular discharge lamps (neon lamps);

---Part 2-11: Special requirements for miscellaneous electronic circuits used with lamps;

---Part 2-12: Special requirements for DC or AC electronic ballasts for discharge lamps (except fluorescent lamps);

---Part 2-13: Special requirements for DC or AC electronic control devices for LED modules:

This document replaces GB 19510.9-2009 "Lamp control devices - Part 9: Special requirements for ballasts for fluorescent lamps" and is consistent with Compared with GB 19510.9-2009, in addition to structural adjustments and editorial changes, the main technical changes are as follows:

---Changed the test circuit of the inductance control device for lamps with integrated starting device (see Appendix I, GB 19510.9-2009 Appendix I):

This document is modified to adopt IEC 61347-2-8:2006 "Lamp control devices - Part 2-8: Special requirements for ballasts for fluorescent lamps":

The technical differences between this document and IEC 61347-2-8:2006 and their reasons are as follows:

---Replaced IEC 61347-1 with normatively cited GB/T 19510.1-2023 for ease of use:

The following editorial changes have been made to this document:

---In order to coordinate with the existing standards, the name of the standard is changed to "Light source control device Part 2-8: Special requirements for ballasts for fluorescent lamps" Require";

---Replaced IEC 61347-2-3 with the informative reference GB/T 19510.203-2023;

---Replaced IEC 60958-1 with the informative reference GB/T 7000.1-2023:

Please note that some content in this document may be subject to patents: The publisher of this document assumes no responsibility for identifying patents:

Introduction

With the development of light source control device technology, the safety specifications of the previous version of the light source control device can no longer be adapted to meet the current light source control requirements:

Technical requirements and product safety requirements of the device: Safety requirements ensure that electrical equipment is correctly installed, maintained and used in the manner intended Reduce harm to people, livestock or property: GB/T 19510 "Light Source Control Device" updates the technical and safety requirements to the regulations:

It is of great significance to standardize light source control devices, reduce product safety risks, improve product quality, and enhance the competitiveness of our products:

GB/T 19510 aims to standardize light source control devices and is intended to consist of the following parts:

---Part 1: General requirements and safety requirements: The purpose is to standardize the general requirements for control devices and their safety requirements:

---Part 2-1: Special requirements for starting devices (except glow starters): The purpose is to standardize starting devices (except glow starters) (external) special requirements for safety requirements:

---Part 2-2: Special requirements for DC/AC electronic step-down converters for tungsten lamps: The purpose is to standardize the direct use of tungsten filament lamps Special requirements for safety requirements of current/AC electronic buck converters:

---Part 2-3: Special requirements for AC and/or DC electronic control devices for fluorescent lamps: The purpose is to standardize AC for fluorescent lamps and/or special requirements for safety requirements of DC electronic control devices:

---Part 2-7: Special requirements for electronic control devices powered by safety service power supplies (ESSS) for emergency lighting (self-contained): Purpose Special requirements for regulating the safety requirements of electronic control devices powered by safety service power supplies (ESSS) for emergency lighting (self-contained):

---Part 2-8: Special requirements for ballasts for fluorescent lamps: The purpose is to standardize special safety requirements for ballasts for fluorescent lamps:

Require:

---Part 2-9: Special requirements for electromagnetic control devices for discharge lamps (except fluorescent lamps): The purpose is to standardize discharge lamps (fluorescent lamps Except) special requirements for safety requirements for electromagnetic control devices:

---Part 2-10: Special requirements for electronic inverters and frequency converters for high-frequency cold start tubular discharge lamps (neon lamps): The purpose is Special requirements for regulating the safety requirements of electronic inverters and frequency converters for high-frequency cold start tubular discharge lamps (neon lamps):

---Part 2-11: Special requirements for miscellaneous electronic circuits used with lamps: The purpose is to standardize miscellaneous electronics used in conjunction with lamps Special requirements for line safety requirements:

---Part 2-12: Special requirements for DC or AC electronic ballasts for discharge lamps (except fluorescent lamps): The purpose is to regulate discharge Special requirements for the safety of DC or AC electronic ballasts for lamps (other than fluorescent lamps):

---Part 2-13: Special requirements for DC or AC electronic control devices for LED modules: The purpose is to standardize the use of LED modules Special requirements for safety requirements for DC or AC electronic control devices:

This document is used together with GB/T 19510.1, which is revised after supplementing or modifying the corresponding provisions of GB/T 19510.1 made: This document and GB/T 19510.201~GB/T 19510.213 stipulate this when citing any clause of GB/T 19510.1:

The scope of application of the clauses and the test sequence of each test are specified, and necessary supplementary requirements are specified: Each part of GB/T 19510 is independent Established without reference to each other to facilitate future revisions and revisions: If deemed necessary, new requirements will be added:

Light source control devices Part 2-8: For fluorescent lamps Special requirements for ballasts

1 Scope

This document specifies ballasts for fluorescent lamps (excluding resistive ballasts) for use with 50Hz or 60Hz AC power supplies below 1000V:

device) special requirements: The cathode of the matching fluorescent lamp can be preheated or non-preheated, and the working circuit can have or without a starter or starter:

For moving devices, the rated power, size and characteristics of lamps are specified by IEC 60081 and IEC 60901:

This document applies to complete ballasts and their component parts, such as reactors, transformers and capacitors: Characteristics of thermally protected ballasts Special requirements are given in Appendix B:

This document is applicable to supporting ballasts for lamps operating at grid frequency in a traditional manner, excluding AC electronic ballasts operating at high frequencies:

ballast, please see GB/T 19510.203-2023 for the requirements of this ballast:

For requirements on capacitors with a capacitance greater than 0:1µF, see IEC 61048 and IEC 61049: A capacitor with a capacitance less than or equal to 0:1µF See IEC 60384-14 for container requirements:

Performance requirements are given in IEC 60921:

2 Normative reference documents

The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, the dated quotations for undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document:

GB/T 19510.1-2023 Light source control device Part 1: General requirements and safety requirements (IEC 61347-1:2017, MOD)

3 Terms and definitions

The terms and definitions defined in GB/T 19510.1-2023 and the following apply to this document:

deltat

The temperature rise of the winding under the conditions specified in this document is determined by the manufacturer:

Note: Power supply requirements and ballast installation conditions are given in Appendix H:

The ratio of the square of the voltage developed at the output of a voltage source (in an open circuit state) to the internal impedance of the voltage source (viewed from the same end):

4 General requirements

In accordance with the requirements of Chapter 4 of GB/T 19510.1-2023 and the following requirements: