Valid

GB/T 18916.35-2018Norm of water intake—Part 35: Methyl alcohol produced by coal (English PDF)

取水定额 第35部分:煤制甲醇

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 18916.35-2018 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

May 14, 2018

Implementation date

December 1, 2018

Scope

GB/T 18916.35-2018 is the English-translated version of 取水定额 第35部分:煤制甲醇.

GB/T 18916.35-2018 is the part of the Chinese norm of water intake series that deals with methanol produced from coal.

It defines coal-based methanol production, the product and the water intake per ton of methanol, and gives the calculation methods: what counts as water intake, which primary, auxiliary and subsidiary production is included, and how intake is measured and calculated per ton.

It then sets the water intake norms for existing enterprises, for new, rebuilt and expanded enterprises and for advanced enterprises, with instructions on water balance tests and water metering, and an informative annex on calculating the total water intake.

It applies to managing water intake in existing and new plants, including ammonia plants with combined methanol above 10% of ammonia capacity. It was issued on 14 May 2018 and has applied since 1 December 2018.

Found what you need?

Document preview — GB/T 18916.35-2018

National Standard of the People's Republic of China

ICS
13.060.25
Classification
P 41

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword3
  • 1 Scope6
  • 2 Normative References6
  • 3 Terms and Definitions6
  • 4 Calculation Methods7
  • 5 Norm of Water Intake8
  • 6 Instructions for Norm Usage9
  • Appendix A (Informative) Calculation of Quantity of Water Intake for Methyl Alcohol Produced by Coal10

Foreword

The following parts of GB/T 18916 Norm of Water Intake have been issued or are planned to be issued.

---Part 1. Fossil Fired Power Production;

---Part 2. Iron and Steel Complex;

---Part 3. Petroleum Refining;

---Part 4. Dyeing and Finishing of Cotton Production;

---Part 5. Pulp, Paper and Paper Board Production;

---Part 6. Brewing Industry;

---Part 7. Alcohol Production;

---Part 8. Ammonia Synthesis;

---Part 9. Monosodium L-glutamate Production;

---Part 10. Pharmaceutical Products;

---Part 11. Coal Cleaning;

---Part 12. Alumina Production;

---Part 13. Ethylene Production;

---Part 14. Wool Textile Product;

---Part 15. Chinese Spirits Production;

---Part 16. Electrolytic Aluminum Production;

---Part 17. Manufacture of Accumulating Type of Bauxite;

---Part 18. Copper Smelting Production;

---Part 19. Lead Smelting Production;

---Part 20. Chemical Filament Yarns Weaving Products;

---Part 21. Silk Production;

---Part 22. Starch Sugar Production;

---Part 23. Citrate Acid Production;

---Part 24. Long Vegetable Fiber Production;

---Part 25. Chinese Spirits Production;

---Part 26. Soda Ash;

---Part 27. Urea;

---Part 28. Sulphuric Acid for Industrial Use;

---Part 29. Caustic Soda;

---Part 30. Coking;

---Part 31. Sintering and Pelletizing for Iron and Steel Industry;

---Part 32. Iron Ore Mineral Processing;

---Part 33. Indirect Coal Liquefaction;

---Part 34. Direct Coal Liquefaction;

---Part 35. Methyl Alcohol Produced by Coal;

---Part 36. Ethylene Glycol Produced with Coal as Raw Material;

---Part 37. Phosphoric Acid by Wet Process;

---Part 38. Polyvinyl Chloride;

---Part 39. Natural Gas Produced by Coal.

This is Part 35 of GB/T 18916.

This Part is drafted in accordance with stipulations in GB/T 1.1-2009.

1 Scope

This Part of GB/T 18916 specifies the terms and definitions, calculation methods and norm of water intake of methyl alcohol produced by coal.

This Part is applicable to the management of water intake of the existing, newly constructed, reorganized and expanded enterprises in the production of methyl alcohol produced by coal (including synthetic ammonia combined methanol whose capacity exceeds 10% of total ammonia).

2 Normative References

The following documents are indispensable to the application of this Standard. In terms of references with a specified date, only versions with a specified date are applicable to this Standard. The latest version (including all the modifications) of references without a specified date is also applicable to this Standard.

GB/T 12452 The General Principles of Water Balance Test in Enterprises

GB/T 18820 General Principles of Stipulation of Water Intake Norm for Industrial Product

GB/T 21534 Industrial Water Usage and Conservation - Terminology

GB 24789 General Provisions on Equipping and Managing of the Measuring Instrument of Water in Organization of Water Using

3 Terms and Definitions

What is defined in GB/T 18820 and GB/T 21534, and the following terms and definitions are applicable to this document.

3.1 Methyl Alcohol Produced by Coal

Methyl alcohol produced by coal refers to the production process of air separation oxygen production, coal-to-gas, gas purification, methanol synthesis and methanol refining, in which, coal, water and air are the main raw materials.

3.2 Methyl Alcohol Product Produced by Coal

Methyl alcohol product produced by coal refers to products that are obtained through the production process of air separation oxygen production, coal-to-gas, gas purification, methanol synthesis and methanol refining, in which, coal, water and air are the main raw materials.

3.3 Quantity of Water Intake for Per Ton Methyl Alcohol Produced by Coal

Quantity of water intake for per ton methyl alcohol produced by coal refers to the quantity of water that enterprises need to extract from various water resources for the production of per ton methyl alcohol product produced by coal.

4 Calculation Methods

4.1 General Stipulations

4.1.1 Scope of water intake

Range of water intake refers to the quantity of water that enterprises extract from various conventional water resources, including water extracted from surface water (calculated by water supply from water purification plants), underground water, water supply engineering in cities and towns, and other water or water products (such as steam, hot water and geothermal water, etc.) that enterprises purchase from the market.

4.1.2 Range of water intake supply

Range of water intake supply for methyl alcohol produced by coal includes primary production (the production process of air separation oxygen production, coal-to-gas, gas purification, methanol synthesis and methanol refining, in which, coal, water and air are the main raw materials), auxiliary production (including machine maintenance, boiler, air compression station, sewage treatment station, testing and inspection, comprehensive utilization transportation and self-owned power plant, etc.) and subsidiary production (including office, afforestation, plant canteen, bathroom and toilet, etc.).

4.1.3 Measuring of water intake

The quantity of water intake shall be measured with enterprises' Level-1 measuring table.

4.2 Quantity of water intake for Methyl Alcohol Produced by Coal

The quantity of water intake for methyl alcohol produced by coal shall be calculated in accordance with Formula (1). Where.

Vi---quantity of water intake for methyl alcohol produced by coal, expressed in (m3);

Vg---water consumption of coal gasification, expressed in (m3);

Vm---water consumption of methanol synthesis unit, expressed in (m3);

Va---water apportionment of ancillary facilities of methyl alcohol produced by coal, expressed in (m3).

4.3 Quantity of Water Intake for Per Ton Methyl Alcohol Produced by Coal

The quantity of water intake for per ton methyl alcohol produced by coal shall be calculated in accordance with Formula (2). Where.

Vui---quantity of water intake for per ton methyl alcohol produced by coal, expressed in (m3/t);

Vi---within a certain measuring time, total quantity of water intake during the production process, expressed in (m3);

Q---within a certain measuring time, output of methyl alcohol product produced by coal, expressed in (t).

5 Norm of Water Intake

5.1 Water Intake Norm of Existing Enterprises

The norm of water intake of existing enterprises in methyl alcohol produced by coal shall be <= 15 m³/t.

5.2 Water Intake Norm of Newly Constructed, Reorganized and Expanded Enterprises

The norm of water intake of newly constructed, reorganized and expanded enterprises in methyl alcohol produced by coal shall be <= 11 m³/t.

5.3 Water Intake Norm of Advanced Enterprises

The norm of water intake of advanced enterprises in methyl alcohol produced by coal shall be <= 9 m³/t.

6 Instructions for Norm Usage

6.1 In the management of the norm of water intake, enterprises' water balance test shall comply with the requirement in GB/T 12452.

6.2 The configuration and management of water measuring instrument for enterprises in methyl alcohol produced by coal shall comply with the requirement in GB 24789.

6.3 Please refer to Appendix A for the method of calculating the quantity of water intake for methyl alcohol produced by coal.

Appendix A (Informative) Calculation of Quantity of Water Intake for Methyl Alcohol Produced by Coal

In the calculation of the quantity of water intake of methyl alcohol products, how to obtain the total quantity of water intake within a certain period of production becomes the key to accurate calculation of water intake quantity of methyl alcohol products. In accordance with the nature of methyl alcohol product production, the total quantity of water intake shall be calculated in accordance with this formula. Where.

Vi---total quantity of water intake;

Vg---water consumption of coal gasification. it refers to water or steam that is consumed in the stage of methyl alcohol production, which needs coal gasification to generate effective gas (CO + H2) and obtains methanol synthesis gas through transformation, refinement and hydrogen distribution. It includes steam, that is involved in chemical reaction. Mostly, it is steam brought out by effective gas, and cooling washing water that is generated through the rinsing of effective gas.

Vm---water consumption of methyl alcohol device. it refers to water consumption in the conversion of circulating water hydration, softened water, demineralized water, steam and condensate water that are needed in methanol synthesis and the operation of methanol refining device;

Va---water apportionment of ancillary facilities. it refers to water consumption that is apportioned to methyl alcohol device at a certain proportion by ancillary facilities (including office, afforestation, plant canteen, bathroom and toilet, etc.). […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 18916.35-2018

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 18916.35-2018

$75.00