GB/T 18311.25-2026Fibre optic interconnecting devices and passive components—Basic test and measurement procedures—Part 3-25: Examinations and measurements—Concentricity of non-angled ferrules and non-angled ferrules with fibre installed (English PDF)
纤维光学互连器件和无源器件 基本试验和测量程序 第3-25部分:检查和测量 无角度插针和装有光纤的无角度插针的同心度
This is a limited preview
Buy now to download the full PDF
Need quotation for your management?
Get a formal quotation for GB/T 18311.25-2026 in 30 minutes.
Issued by
State Administration for Market Regulation; Standardization Administration of China
Level / Type
National · Recommended
Issue date
October 30, 2026
Implementation date
May 1, 2027
Scope
GB/T 18311.25-2026 is the English-translated version of 纤维光学互连器件和无源器件 基本试验和测量程序 第3-25部分:检查和测量 无角度插针和装有光纤的无角度插针的同心度.
GB/T 18311.25-2026 is the Chinese national standard "Fibre optic interconnecting devices and passive components—Basic test and measurement procedures—Part 3-25: Examinations and measurements—Concentricity of non-angled ferrules and non-angled ferrules with fibre installed".
It was issued on October 30, 2026 by the State Administration for Market Regulation and the Standardization Administration of China, and takes effect on May 1, 2027. It is a current standard.
Found what you need?
Document preview — GB/T 18311.25-2026
National Standard of the People's Republic of China
Issued by: State Administration for Market Regulation; Standardization Administration of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 2.1 Terms
- 2.2 Symbols
- 3 Terms and Definitions
1 Foreword
GB/T 18311.25-2026 was issued by State Administration for Market Regulation; Standardization Administration of China on 30 October 2026 and takes effect on 1 May 2027.
It is one of 20 parts of the GB/T 18311 series.
The GB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
GB/T 18311.25-2026 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 76,457 other GB/T standards.
Of the 47,415 GB/T standards that do carry an ICS number, 3,437 (7%) fall under ICS 77, in the field of metallurgy.
3 About this standard
Issued by: State Administration for Market Regulation; Standardization Administration of China
4 Related standards
Other parts of this standard:
GB/T 18311.1-2003 — Fibre optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 3-1: Examinations and measurements -- Visual examination
GB/T 18311.1-2026 — Fibre optic interconnecting devices and passive components—Basic test and measurement procedures—Part 3-1:Examinations and measurements—Visual examination
GB/T 18311.2-2001 — Fibre optic interconnecting devices and passive component -- Basic test and measurement procedures -- Part 3-2: Examinations and measurements -- Polarization dependence of a single-mode fibre optic device
GB/T 18311.2-2026 — Fibre optic interconnecting devices and passive components—Basic test and measurement procedures—Part 3-2: Examination and measurements—Polarization dependent loss in a single-mode fibre optic device
GB/T 18311.3-2001 — Fibre optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 3-3: Examinations and measurements -- Monitoring change in attenuation and in return loss (multiple paths)
GB/T 18311.4-2003 — Fibre optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 3-4: Examinations and measurements -- Attenuation
GB/T 18311.5-2003 — Fibre optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 3-5: Examinations and measurements -- Wavelength dependence of attenuation
GB/T 18311.6-2001 — Fibre optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 3-6: Examinations and measurements -- Return loss
GB/T 18311.16-2007 — Fibre optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 3-16: Examinations and measurements -- End face radius of spherically polished ferrules
GB/T 18311.20-2007 — Fibre optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 3-20: Examinations and measurements -- Directivity of fibre optic branching devices
GB/T 18311.26-2007 — Fibre optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 3-26: Examinations and measurements -- Measurement of the angular misalignment between fibre and ferrule axes
GB/T 18311.28-2007 — Fibre optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 3-28: Examinations and measurements -- Transient loss
GB/T 18311.28-2026 — Fiber optic interconnecting devices and passive components—Basic test and measurement procedures—Part 3-28:Examinations and measurements—Transient loss
GB/T 18311.30-2007 — Fibre optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 3-30: Examinations and measurements -- Polish angle and fibre position on single ferrule multi-fibre connectors
GB/T 18311.31-2007 — Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-31: Examinations and measurements - Coupled power ratio measurement for fibre optic sources
GB/T 18311.34-2003 — Fibre optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 3-34: Examinations and measurements -- Attenuation of random mated connectors
GB/T 18311.40-2003 — Fibre optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 3-40: Examinations and measurements -- Extinction ratio of a polarization maintaining (pm) fibre pigtailed connector
GB/T 18311.47-2026 — Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-47: Examinations and measurements - End face geometry of PC/APC spherically polished ferrules using interferometry
GB/T 18311.55-2026 — Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-55: Examinations and measurements - Polarisation extinction ratio and keying accuracy of polarisation maintaining, passive, optical components
5 Classification and status
Prefix GB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — all pages — is available in the English PDF.
How to Download GB/T 18311.25-2026
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 18311.26-2007 — Fibre optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 3-26: Examinations and measurements -- Measurement of the angular misalignment between fibre and ferrule axes
GB/T 18311.20-2007 — Fibre optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 3-20: Examinations and measurements -- Directivity of fibre optic branching devices
GB/T 18311.28-2026 — Fiber optic interconnecting devices and passive components—Basic test and measurement procedures—Part 3-28:Examinations and measurements—Transient loss
GB/T 18311.25-2026
$255.00