Valid

GB/T 18216.17-2026Electrical safety in low voltage distribution systems up to 1000V AC and 1500V DC—Equipment for testing, measuring or monitoring of protective measures—Part 17: Non-contact AC voltage indicators (English PDF)

交流1000V和直流1500V及以下低压配电系统电气安全 防护措施的试验、测量或监控设备 第17部分:非接触式交流电压指示器

Preview PDF

This is a limited preview

Buy now to download the full PDF

Need quotation for your management?

Get a formal quotation for GB/T 18216.17-2026 in 30 minutes.

Issued by

State Administration for Market Regulation; Standardization Administration of China

Level / Type

National · Recommended

Issue date

October 30, 2026

Implementation date

May 1, 2027

Scope

GB/T 18216.17-2026 is the English-translated version of 交流1000V和直流1500V及以下低压配电系统电气安全 防护措施的试验、测量或监控设备 第17部分:非接触式交流电压指示器.

GB/T 18216.17-2026 is the Chinese national standard "Electrical safety in low voltage distribution systems up to 1000V AC and 1500V DC—Equipment for testing, measuring or monitoring of protective measures—Part 17: Non-contact AC voltage indicators".

It was issued on October 30, 2026 by the State Administration for Market Regulation and the Standardization Administration of China, and takes effect on May 1, 2027. It is a current standard.

Found what you need?

Document preview — GB/T 18216.17-2026

National Standard of the People's Republic of China

Issued by: State Administration for Market Regulation; Standardization Administration of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative References
  • 2.1 Terms
  • 2.2 Symbols
  • 3 Terms and Definitions

1 Foreword

GB/T 18216.17-2026 was issued by State Administration for Market Regulation; Standardization Administration of China on 30 October 2026 and takes effect on 1 May 2027.

It is one of 25 parts of the GB/T 18216 series.

The GB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

GB/T 18216.17-2026 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 76,457 other GB/T standards.

Of the 47,415 GB/T standards that do carry an ICS number, 3,437 (7%) fall under ICS 77, in the field of metallurgy.

3 About this standard

Issued by: State Administration for Market Regulation; Standardization Administration of China

4 Related standards

Other parts of this standard:

GB/T 18216.1-2000 — AC 1 000 V DC 1 500 V low voltage power distribution system electrical safety detection test, measurement or monitoring equipment - Part 1: General requirements

GB/T 18216.1-2012 — Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 1: General requirements

GB/T 18216.1-2021 — Electrical safety in low voltage distribution systems up to 1 000 V a. c. and 1 500 V d. c. - Equipment for testing, measuring or monitoring of protective measures - Part 1: General requirements

GB/T 18216.2-2002 — 1000V AC and 1500V dc low voltage distribution system Electrical Safety Equipment for testing, measuring or monitoring equipment - Part 2: Insulation resistance

GB/T 18216.2-2012 — Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 2: Insulation resistance

GB/T 18216.2-2021 — Electrical safety in low voltage distribution systems up to 1 000 V a. c. and 1 500 V d. c. - Equipment for testing, measuring or monitoring of protective measures - Part 2: Insulation resistance

GB/T 18216.3-2007 — 1000V AC and 1500V dc low voltage distribution system electrical safety measures for testing, measuring or monitoring equipment - Part 3: Loop impedance

GB/T 18216.3-2012 — Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 3: Loop impedance

GB/T 18216.3-2021 — Electrical safety in low voltage distribution systems up to 1 000 V a. c. and 1 500 V d. c. - Equipment for testing, measuring or monitoring of protective measures - Part 3: Loop impedance

GB/T 18216.4-2007 — 1000V AC and 1500V dc low voltage distribution system electrical safety measures testing, measuring or monitoring equipment - Part 4: grounding resistance and equipotential grounding resistance

GB/T 18216.4-2012 — Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 4: Resistance of earth connection and equipotential bonding

GB/T 18216.4-2021 — Electrical safety in low voltage distribution systems up to 1 000 V a. c and 1 500 V d. c - Equipment for testing, measuring or monitoring of protective measures - Part 4: Resistance of earth connection and equipotential bonding

GB/T 18216.5-2007 — 1000V AC and DC 1500V following low voltage distribution system electrical safety protection measures for testing, measuring or monitoring equipment - Part 5: Resistance to earth

GB/T 18216.5-2012 — Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 5: Resistance to earth

GB/T 18216.5-2021 — Electrical safety in low voltage distribution systems up to 1 000 V a. c. and 1 500 V d. c. - Equipment for testing, measuring or monitoring of protective measures - Part 5: Resistance to earth

GB/T 18216.6-2022 — Electrical safety in low voltage distribution systems up to 1000V a. c. and 1500V d. c. - Equipment for testing, measuring or monitoring of protective measures - Part 6: Effectiveness of residual current devices(RCD) in TT, TN and IT systems

GB/T 18216.7-2024 — Electrical safety in low voltage distribution systems up to 1000V a. c. and 1500V d. c. - Equipment for testing, measuring or monitoring of protective measures - Part 7: Phase sequence

GB/T 18216.8-2015 — Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. -- Equipment for testing, measuring or monitoring of protective measures -- Part 8: Insulation monitoring devices for IT systems

GB/T 18216.9-2015 — Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. --Equipment for testing, measuring or monitoring of protective measures -- Part 9: Equipment for insulation fault location in IT systems

GB/T 18216.10-2022 — Electrical safety in low voltage distribution systems up to 1000V a.c. and 1500V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 10: Combined measuring equipment for testing, measuring or monitoring of protective measur

GB/T 18216.11-2024 — Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 11: Effectiveness of residual current monitors(RCM)in TT, TN and IT systems

GB/T 18216.12-2010 — Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 12: Performances measuring and monitoring devices (PMD)

GB/T 18216.12-2025 — Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 12: Power metering and monitoring devices(PMD)

GB/T 18216.15-2026 — Electrical safety in low voltage distribution systems up to 1000V AC and 1500V DC—Equipment for testing, measuring or monitoring of protective measures—Part 15: Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems

5 Classification and status

Prefix GB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — all pages — is available in the English PDF.

How to Download GB/T 18216.17-2026

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 18216.17-2026

$255.00