GB/T 17737.100-2018Coaxial communication cables -- Part 1-100: Electrical test methods -- General requirements (English PDF)

Foreword

GB/T 17737 "Coax Cable" has been or is planned to release the following parts.

--- Part 1. General rules, definitions and requirements;

---Part 1-100. General requirements for electrical test methods;

--- Part 1-101. Electrical test method Conductor DC resistance test;

--- Part 1-102. Electrical test method cable dielectric insulation resistance test;

--- Part 1-1-3. Electrical test method for cable capacitance test;

--- Part 1-1-4. Electrical test method for the capacitance stability test of cables;

--- Part 1-105. Electrical test method for withstand voltage test of cable media;

---Parts 1-106. Electrical test method - Withstand voltage test for cable sheathing;

--- Part 1-107. Electrical test method cable trembling charge level (mechanical induction noise) test;

--- Part 1-108. Electrical test methods for characteristic impedance, phase delay, group delay, electrical length and propagation speed test;

--- Part 1-110. Electrical test method continuity;

--- Part 1-111. Stability test of phase constants of electrical test methods;

--- Part 1-112. Electrical test method return loss (impedance consistency) test;

--- Part 1-113. Electrical test method attenuation constant test;

--- Part 1-114. Electrical test method inductance;

--- Part 1-115. Electrical test method impedance uniformity (pulse/step function return loss) test;

--- Part 1-161. Electrical test method TDR method to measure characteristic impedance;

--- Part 1-119. Electrical test methods - RF rated power;

--- Part 1-122. Electrical test method Crosstalk test between coaxial cables;

This part is part 1-100 of GB/T 17737.

This part is drafted in accordance with the rules given in GB/T 1.1-2009.

This part uses the translation method equivalent to IEC 61196-1-100.2015 "Coaxial Communication Cables Part 1-100. Electrical Test Side

General Requirements for Law.

The documents of our country that have a consistent correspondence with the international documents referenced in this part are as follows.

Coaxial communication cables - Part 1 . General rules, definitions and requirements (IEC 61196-1.

2005, IDT)

1 Scope

This part of GB/T 17737 gives the general requirements and conditions for the electrical test of coaxial communication cables. This section applies to

GB/T 17737.1xx series standard, which specifies the electrical test method for coaxial communication cables.

Test details (eg temperature, duration) and/or test requirements will be given in the relevant cable standards.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

Coaxial communication cables - Part 1. General specification, definitions and requirements (Coaxialcommunication

cables-Part 1. Genericspecification-General, definitionsandrequirements)

3 Terms and definitions

The terms and definitions defined in IEC 61196-1 apply to this document.

4 sample

5 test

The test and performance characteristics required for cables of different sizes are specified by the relevant cable standards.

6 Test conditions

7 test report

The test report shall include the measurement results and their maximum error, actual measurement conditions and their maximum error.

Appendix A

(informative appendix)

IEC 61196-1-1xx series electrical test method

IEC 61196-1-1xx consists of the following standards.

IEC 61196-1-100 (general requirements)

IEC 61196-1-101 (conductor DC resistance test)

IEC 61196-1-102 (Cable dielectric insulation resistance test)

IEC 61196-1-103 (capacitance test of cables)

IEC 61196-1-104 (Stability test of cable capacitance with temperature)

IEC 61196-1-105 (withstand voltage test of cable media)

IEC 61196-1-106 (withstand voltage test of cable sheath)

IEC 61196-1-107 [Cable Diffraction Charge Level (Mechanical Induction Noise) Test]

IEC 61196-1-108 (characteristic impedance, phase delay, group delay, electrical length and propagation speed test)

IEC 61196-1-110 (continuity)

IEC 61196-1-111 (Phase stability test method)

IEC 61196-1-112 [Return loss (impedance consistency) test]

IEC 61196-1-113 (Attenuation Constant Test)

IEC 61196-1-114 (inductance)

IEC 61196-1-115 [Impedance uniformity (pulse/step function return loss) test]

IEC 61196-1-116 (TDR method for measuring characteristic impedance)

IEC 61196-1-119 (RF rated power)

IEC 61196-1-122 (coaxial cable crosstalk test)

......