Valid

GB/T 17255.2-2009Prosthetics and orthotics -- Classification and description of prosthetic components -- Part 2: Description of lower-limb prosthetic components (English PDF)

假肢与矫形器 假肢部件的分类和描述 第2部分:下肢假肢部件的描述

Preview PDF

This is a limited preview

Buy now to download the full PDF (1996 pages)

Need quotation for your management?

Get a formal quotation for GB/T 17255.2-2009 in 30 minutes.

Issued by

General Administration of Quality Supervision, Inspection and Quarantine of the People 's Republic of China

Level / Type

National · Recommended

Issue date

September 30, 2009

Implementation date

December 1, 2009

Scope

GB/T 17255.2-2009 is the English-translated version of 假肢与矫形器 假肢部件的分类和描述 第2部分:下肢假肢部件的描述.

GB/T 17255.2-2009 — This part of GB/T 17255 specifies a method for describing prosthetic components of lower limbs.

Found what you need?

Document preview — GB/T 17255.2-2009

National Standard of the People's Republic of China

ICS
11.040.40
Classification
C 45
Replacing
GB/T 17255.2-1998

Issued by: General Administration of Quality Supervision, Inspection and Quarantine of the People 's Republic of China

Contents

  • Preface
  • Introduction
  • 1 Scope
  • 2 Normative reference document
  • 3 Terms and definitions
  • Category
  • 5 Engaging parts
  • 6 Functional components
  • 7 Pairs of wire parts
  • 8 Structural parts (prosthetic structure)
  • 9 Decorative parts

Foreword

GB/T 17255 "prosthesis and orthopedic prosthetic components of the classification and description" is divided into three parts.

- Part 1. Classification of prosthetic components;

- Part 2. description of lower limb prosthetic components;

Part 3. Description of upper limb prosthetic components.

This part is part 2 of GB/T 17255.

This part is equivalent to ISO 13405-2.:1996 "Classification and description of prosthetic limbs and prostheses Part 2. Lower limb prostheses Component Description "(English version).

For ease of use, this section makes the following editorial changes.

a) the introduction of the preamble of international standards;

b) "this International Standard" is replaced by "this part".

This part of the replacement GB/T 17255.2-1998 "prosthetic and orthopedic prosthetic components of the classification and description of the second part. lower limb prosthesis Part description ". This part compared with GB/T 17255.2-1998, the main changes are as follows.

a) quoted in the normative reference document GB/T 14191.1 "Terminology of prosthetics and orthopedics Part 1. In vitro prostheses and the basic terminology of in vitro orthoses "(GB/T 14191.1-2009, ISO 8549-1. 1989, IDT);

b) changes to terms and definitions that are not sufficiently accurate for partial expressions, such as "support period" to "support phase", "swing period" to "pendulum" Moving "," instantaneous rotation of the shaft "to" instantaneous rotation center "and so on.

This part is made by the Ministry of Civil Affairs of the People's Republic of China.

This section is headed by the National Standardization Technical Committee for the Rehabilitation and Special Equipment for Persons with Disabilities (SAC/TC148).

This part of the drafting unit. China Rehabilitation Equipment Association, Beijing artificial limb orthosis technology center, Chinese orthopedic technology SCHOOL.

This part of the main drafters. Yang Chengrui, Wu Guoshi, Fang Xin.

This part of the previous version of the standard to replace the release of the situation.

--- GB/T 17255.2-1998.

GB/T 17255.2-2009/ISO 13405-2.:1996

Introduction

There is currently no method of classifying and describing prosthetic components that can be used internationally. It is conceivable that this situation it is difficult for the manufacturer to use the text to describe the product and the operator who wrote the medical record when receiving the specific patient.

The purpose of this part of the standard is to ensure that users according to the classification and description system can clearly explain the basic components of the finished prosthesis Features.

The manufacturer's name, material and the production process used are not included here.

GB/T 17255.2-2009/ISO 13405-2.:1996 Classification and description of prosthetic limbs and prostheses Part 2. description of lower limb prosthetic components

1 Scope

This part of GB/T 17255 specifies a method for describing prosthetic components of lower limbs.

2 Normative reference documents

The terms of the following documents are the terms of this part by reference to this part of GB/T 17255. Any reference to the date of the text , All subsequent amendments (excluding corrigenda) or revisions do not apply to this part, however, encouragement under this section the parties to the agreement study whether the latest version of these documents can be used. For undated references, the latest edition of this document applies section.

GB/T 14191.1 Terminology for prosthetics and orthopedics - Part 1. Basic terms for prostheses and orthotics in vitro (GB/T 14191.1-2009, ISO 8549-1. 1989, IDT) GB/T 17255.1 Classification and description of prosthetic limbs for prostheses and orthoses - Part 1. Classification of prosthetic components (GB/T 17255.1-2009, ISO 13405-1.:1996, IDT) ISO 8549-2. 1989 Terminology for prosthetics and orthopedics - Part 2. Relevant to prosthetic prostheses and prostheses the term

3 Terms and definitions

The terms and definitions established in GB/T 14191.1, ISO 8549-2. 1989 apply to this part of GB/T 17255.

4 Classification

Lower limb prosthetic components include five types according to the definition in GB/T 17255.1.

5 Engagement parts

5.1 Accept the cavity

5.1.1 Overview

The receiving chamber is described by the following information.

5.1.2 Amputation site

According to the series specified in ISO 8549-2, the amputation sites associated with the production of prosthetic receptors are expressed as follows.

a) partial amputation;

b) ankle off;

c) leg amputation (knee amputation);

d) knee off;

e) thigh amputation (knee amputation);

f) hip break;

g) pelvic excision.

5.1.3 Force transfer performance

Note. The force transfer performance is directly related to the shape of the receiving cavity, which is necessary to support, stabilize and suspend the receiving cavity.

GB/T 17255.2-2009/ISO 13405-2.:1996

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 1996 pages — is available in the English PDF.

How to Download GB/T 17255.2-2009

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
1996 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 17255.2-2009

$145.00