GB/T 16857.9-2022Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems(CMS) - Part 9: CMMs with multiple probing systems (English PDF)

foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules for Standardization Documents"

drafting.

This document is GB/T 16857 "Geometric Product Specification (GPS) Coordinate Measurement System (CMS) Acceptance Test and Re-inspection Test"

Part 9 of. GB/T 16857 has issued the following parts.

--- Part 1.Vocabulary;

--- Part 2.Coordinate measuring machines for measuring linear dimensions;

--- Part 3.Coordinate measuring machine with the axis of the turntable as the fourth axis;

--- Part 4.Coordinate measuring machines used in scanning mode;

--- Part 5.Coordinate measuring machines using single-probe or multi-probe tactile probing systems;

--- Part 6.Evaluation of errors in calculating Gaussian fitting elements;

--- Part 7.Coordinate measuring machine equipped with image detection system;

--- Part 8.Coordinate measuring machines using optical distance sensors;

--- Part 9.Coordinate measuring machines equipped with multiple detection systems;

--- Part 901.Coordinate measuring machines equipped with multi-image detection systems;

--- Part 10.Laser tracker;

--- Part 12.Articulated arm coordinate measuring machine.

This document is equivalent to ISO 10360-9.2013 "Geometric Product Specification (GPS) Coordinate Measuring System (CMS) Acceptance Test

and re-inspection testing Part 9.Coordinate measuring machines equipped with multiple probing systems".

Please note that some contents of this document may refer to patents. The issuing agency of this document assumes no responsibility for identifying patents.

Introduction

Aiming at the key issues such as the lack of acceptance testing and re-inspection testing standards of coordinate measuring machines, and the urgent demand for corresponding testing standards, the focus of research

Acceptance testing and re-inspection testing methods of coordinate measuring machines, qualification judgment rules, application of acceptance testing and re-inspection testing, formulate conforming product

National standard for acceptance testing and re-inspection testing of Coordinate Measuring System (CMS) for Geometric Specifications (GPS).

GB/T 16857 "Geometric Product Specification (GPS) Coordinate Measurement System (CMS) Acceptance Test and Re-inspection Test" is based on the product

Geometry Specification (GPS) system, using coordinate measurement technology, sensor technology and error theory, etc., through theoretical analysis, international standard research

Recommended national standards for acceptance testing and re-inspection testing of coordinate measuring machines formulated through research, measurement application practice experience summary, etc.

The formulation of GB/T 16857 can fill in the gaps in my country's coordinate measuring machine acceptance testing and re-inspection testing standards, and contribute to the development of relevant coordinate measuring machines.

The manufacturer unifies the detection method, improves the consistency and stability of the performance of the coordinate measuring machine at the factory, and provides a basis for the acceptance detection and re-inspection of the coordinate measuring machine.

provide strong technical support.

GB/T 16857 is proposed to consist of 14 parts.

--- Part 1.Vocabulary. The purpose is to define the vocabulary of coordinate measuring machines and their acceptance and re-inspection tests.

--- Part 2.Coordinate measuring machines for measuring linear dimensions. The purpose is to specify coordinate measuring machines for measuring linear dimensions, according to

The verification method of acceptance testing according to the characteristic indicators given by the manufacturer, and the verification method of periodic re-inspection testing of the measuring machine by the user

proof method.

--- Part 3.Coordinate measuring machine configured with the axis of the turntable as the fourth axis. The purpose is to specify the verification of a specified by the manufacturer

Acceptance test specifications for the performance of four-axis coordinate measuring machines, and re-inspection tests for users to periodically re-verify the performance of four-axis coordinate measuring machines

specification.

--- Part 4.Coordinate measuring machine used in scanning mode. The purpose is to specify the coordinate measuring machine used in scan mode

Performance acceptance testing and re-inspection testing.

--- Part 5.Coordinate measuring machines using single-probe or multi-probe tactile probing systems. The purpose is to specify the

Methods for acceptance testing and re-inspection testing of coordinate measuring machine characteristics for measurement systems.

--- Part 6.Evaluation of the error of calculating Gaussian fitting elements. The purpose of this document is to specify a method for testing software that is used for

The coordinate measurement calculates the fitted features.

--- Part 7.Coordinate measuring machine with image detection system. The purpose is to specify the verification of coordinate measuring machines used to measure dimensions

Acceptance testing methods to determine whether it meets the performance specified by the manufacturer, and the user regularly verifies the performance of the coordinate measuring machine

capable retesting methods.

--- Part 8.Coordinate measuring machines using optical distance sensors. The purpose is to specify the parameters specified by the CMM manufacturer or user

The specified performance requirements, the acceptance test method for verifying the coordinate measuring machine according to the characteristic indicators given by the manufacturer, and the user regularly verifying the position

The application of re-inspection testing methods, qualification judgment rules, acceptance testing and re-inspection testing for standard measuring machine performance.

--- Part 9.Coordinate measuring machine configured with multiple detection systems. The purpose is to provide for multiple probes equipped with contact/non-contact measurement modes.

The detection method of the coordinate measuring machine of the measurement system.

--- Part 901.Coordinate measuring machine with multi-image detection system. The purpose is to specify the location of the multi-image detection system

Method for acceptance testing and re-inspection testing of marking measuring machines.

--- Part 10.Laser tracker. The purpose is to specify the acceptance test specifications for the performance of the laser tracker and the user's periodic re-verification incentives.

Re-inspection test specification for optical tracker performance.

--- Part 11.Industrial CT. The purpose is to specify the principle of X-ray computed tomography (CT) based on X-ray attenuation

Inspection methods and metrological characteristics of coordinate measuring systems (CMS) for dimensional measurement of technical components as a single sensor.

--- Part 12.Articulated arm coordinate measuring machine. The purpose is to specify the acceptance testing and review of the performance of articulated arm coordinate measuring machines

detection.

--- Part 13.Optical three-dimensional coordinate measuring machine. The purpose is to specify the acceptance testing and re-inspection of the performance of optical three-dimensional coordinate measuring machines

detection.

Product Geometry Specification (GPS) Coordinate Measurement

System (CMS) acceptance testing and re-inspection testing

Part 9.Coordinate measuring machines equipped with multiple probing systems

1 Scope

This document specifies inspection methods for coordinate measuring machines equipped with multiple probing systems for contact/non-contact measurement modes.

This document applies to the following situations.

---Acceptance testing of the performance indicators of the coordinate measuring machine and its measuring head proposed by the manufacturer;

---Periodic re-inspection of the performance indicators of the coordinate measuring machine and its probe is proposed by the user;

---Proposed by the user to check the performance indicators of the coordinate measuring machine and its probe between two re-inspection tests.

This document covers CMMs with single probe axes as well as multiple probe axes with little or most overlap in the measurement space, and is suitable for use with different

A variety of probing systems composed of the same type of probe (for example, a combination of a vision probe and a touch probe, or a combination of two touch probes for different purposes

combine).

The detection method described in this document is closely related to the various errors introduced by the coordinate measuring machine and the detection system.

Complementary to the length measurement error and the detection error of each detection system. Before executing this document, it is advisable to detect length measurement errors on the coordinate measuring machine.

The detection error of each detection system of the coordinate measuring machine is tested according to the standard (such as ISO 10360-5, ISO 10360-7 or ISO 10360-8).

2 Normative references

The contents of the following documents constitute the essential provisions of this document through normative references in the text. Among them, dated references

For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to

this document.

ISO 10360-1 Technical specifications for product geometry (GPS) Coordinate measuring machine (CMM) acceptance testing and re-inspection testing Part 1

Note. GB/T 16857.1-2002 Technical specification for product geometry (GPS) - Acceptance testing and re-inspection testing of coordinate measuring machines - Part 1.Vocabulary (eqv

ISO 10360-1.2000)

ISO 10360-5 Product geometric specification (GPS) Coordinate measuring system (CMS) acceptance test and re-inspection test Part 5

Note. GB/T 16857.5-2017 Product Geometric Specifications (GPS) Coordinate Measuring Machine Acceptance Test and Re-inspection Test Part 5.Using a Single Probe

Or multi-probe contact probe system coordinate measuring machine (ISO 10360-5.2010, IDT)

ISO 10360-7 Product geometric specification (GPS) Coordinate measuring machine (CMM) acceptance test and re-inspection test Part 7

probingsystems]