GB/T 16722.2-2008Technical product documentation -- Handling of computer-based technical information -- Original documentation (English PDF)

Foreword

In GB/T 16722 "Technical product documentation - computer-aided information processing technology" This general heading comprises the following four components.

--- GB/T 16722.1 Technical product documentation computer-aided technical information - Security requirements

--- GB/T 16722.2 Technical product documentation computer-aided technical information - Original documentation

--- GB/T 16722.3 Technical product documentation - computer-aided information processing technology product design process state

--- GB/T 16722.4 Technical product documentation computer-aided technical information - Document management and retrieval system this section is based on the International Organization for Standardization ISO 11442:2006 "Technical Product File Management" in Chapter 4, "original and complex System files "compiled modify to adopt the international standard technical content, the degree of consistency in the use of non-equivalent.

This Part replaces GB/T 16722.2-1996 "Technical product documentation - computer-aided technical information - Original documentation", the main Modify the contents are.

--- According to GB/T 1.1 and the requirements of this section, modify and increase the "scope" and content "Normative documents";

--- According to the International Organization for Standardization ISO 11442:2006 "Technical Product File Management" content, an increase of Chapter 4 "See copy 4.4", 4.5 "original file" and "4.6 copies of the documents and fidelity," and as the content of these articles 5. Add this section;

--- Also, relevant content on standard text on the modifications made.

This part of the National Technical product documentation Standardization Technical Committee.

This part of the National Technical product documentation Standardization Technical Committee.

This section is drafted. the machine Productivity Promotion Center, China Electronics Technology Group Corporation 28th Research Institute, China Aviation First Aircraft Institute the study, atomic Transtech Services Limited.

1 Scope

This section GB/T 16722 specifies the original document and its terms.

This section applies to computer-aided technical information required for the original file, manual design may also be used.

2 Normative references

The following documents contain provisions which, through reference GB/T 16722 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section.

GB/T 13361 Technical Drawing generic term GB/T 15751 Technical product documentation computer-aided design and drafting vocabulary (GB/T 15751-1995eqv ISO/T R10623.

1992)

3 Terms and Definitions

This part of GB/T 13361 definitions and GB/T 15751 in, some definitions described in detail in Part 4 of this chapter.

4 Original file

The original file is a combination of the original data and the original medium, constitute a technical definition of products, but also carry out repair product life cycle Change basis.

In the manual design is based on a graphic or text data is recorded in a medium (or) on the underlay film and tracing paper, these documents are original Start pattern, known as the original file. When the original file is generated by a computer, the data medium is a tape, disk or CD-ROM. The data is character and (or) graphics, and any amendment can be carried out on the original document.

The structural relationship of the various parts of the original file (manual or computer generated) as shown in FIG.

Structure Diagram 1 in the original file