Valid

GB/T 16608.1-2023Electromechanical telecom elementary relays of assessed quality - Part 1: Generic specification and blank detail specification (English PDF)

有质量评定的电信用基础机电继电器第1部分：总规范与空白详细规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (94 pages)

Need quotation for your management?

Get a formal quotation for GB/T 16608.1-2023 in 30 minutes.

Issued by

State Administration for Market Regulation, China National Standardization Administration

Level / Type

National · Recommended

Issue date

March 17, 2023

Implementation date

October 1, 2023

Scope

GB/T 16608.1-2023 is the English-translated version of 有质量评定的电信用基础机电继电器第1部分：总规范与空白详细规范.

GB/T 16608.1-2023 is the Chinese standard "Electromechanical telecom elementary relays of assessed quality - Part 1: Generic specification and blank detail specification".

Its scope clause reads: This document applies to basic electromechanical relays for telecommunications: Relays conforming to this document are suitable for use in telecommunication equipment, but as a basic Basic electromechanical relays are also suitable for use in specific industrial and other equipment: This document selects the appropriate test methods from IEC 61810 (all parts) and other documents for the detailed specification developed in accordance with this document use: Basic inspection tables are also specified in this document, applicable to detail specifications developed in accordance with this document: Detailed inspection tables are specified in the detail specification:.

Found what you need?

Document preview — GB/T 16608.1-2023

National Standard of the People's Republic of China

ICS: 29.120.70
Classification: L 25
Replacing: GB/T 16608.1-2003,GB/T 16608.50-2012,GB/T 16608.51-2012,GB/T 16608.52-2012,GB/T 16608.53-2012,GB/T 16608.54-2012,GB/T 16608.55-2012

Issued by: State Administration for Market Regulation, China National Standardization Administration

Preface
Introduction
1 Scope
2 Normative references
3 Terms and Definitions
4 rating
5 Signs and Documents
6 Blank detail specification and formulation of detail specification
7 Quality assessment procedure
8 Inspection Form
9 trials
10 Ordering Information
Appendix A (Informative) Relay Reliability---Failure Rate Data
Appendix B (Normative) Relay Characteristics
Appendix C (Normative) Blank detail specification and detail specification
Appendix D (Informative) Grouping Definitions

1 Scope

This document applies to basic electromechanical relays for telecommunications: Relays conforming to this document are suitable for use in telecommunication equipment, but as a basic

Basic electromechanical relays are also suitable for use in specific industrial and other equipment:

This document selects the appropriate test methods from IEC 61810 (all parts) and other documents for the detailed specification developed in accordance with this document use: Basic inspection tables are also specified in this document, applicable to detail specifications developed in accordance with this document:

Detailed inspection tables are specified in the detail specification:

2 Normative references

The contents of the following documents constitute the essential provisions of this document through normative references in the text: Among them, dated references

For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document:

GB/T 2423:23-2013 Environmental testing Part 2: Test method Test Q: Sealing (IEC 60068-2-17:1994,

IDT)

GB/T 2691-2016 Marking codes for resistors and capacitors (IEC 60062:2004, IDT)

GB/T 21711:7-2018 Basic electromechanical relays Part 7: Test and measurement procedures (IEC 61810-7:2006, IDT)

Note: GB/T 2828 (all parts) counting sampling inspection procedures [ISO 2859 (all parts)] and guidance)

Note: GB/T 2423:1-2008 Environmental testing for electric and electronic products Part 2: Test method Test A: Low temperature (IEC 60068-2-1:2007, IDT)

IEC 60068-2-20:2008 Environmental testing Part 2-20: Test method Test T: Solderability and reliability of terminal components

Note: GB/T 2423:28-2005 Environmental testing for electric and electronic products Part 2: Test method Test T: Soldering (IEC 60068-2-20:1979,

IDT)

IEC 60068-2-58:2004 Environmental testing No: 2-58: Test method Test Td: Solderability of surface mount components (SMD) utes)

IEC 60695-11-5:2004 Fire Hazard Tests for Electrical and Electronic Products Test Methods for Flame Needle Flame Test Devices and Confirmation Tests

Methods and guidelines (Firehazardtesting-Testflames-Needle-flametestmethod-Apparatus, confirmatory

Note: GB/T 5169:5-2020 Fire Hazard Tests for Electrical and Electronic Products Part 5: Test Flame Needle Flame Test Method Device, Confirmation Test Method

GB/T 17737.101 | GB/T 17737.100 | GB/T 21711.1 | GB/T 21711.3 | GB/T 21711.10 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 94 pages — is available in the English PDF.

Referenced standards

Normative references

GB/T 2691-2016Marking codes for resistors and capacitors

GB/T 2423 · IEC 60068 · IEC 60062 · GB/T 21711 · IEC 61810 · GB/T 2828 · ISO 2859 · IEC 60695 · GB/T 5169

Cited by

How to Download GB/T 16608.1-2023

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.