GB/T 15721.3-2009Prosthetics and orthotics -- Limb deficiencies -- Part 3: Method of describing upper limb amputation stumps (English PDF)
假肢与矫形器 肢体缺失 第3部分:上肢截肢残肢的描述方法
This is a limited preview
Buy now to download the full PDF (8 pages)
Need quotation for your management?
Get a formal quotation for GB/T 15721.3-2009 in 30 minutes.
Issued by
Standardization Administration of China
Level / Type
National · Recommended
Issue date
September 30, 2009
Implementation date
December 1, 2009
Scope
GB/T 15721.3-2009 is the English-translated version of 假肢与矫形器 肢体缺失 第3部分:上肢截肢残肢的描述方法.
GB/T 15721.3-2009 — This section GB/T 15721 specifies the way of describing upper limb amputation stumps method, and recording information as described.
Found what you need?
Document preview — GB/T 15721.3-2009
National Standard of the People's Republic of China
- ICS
- 11.180
- Classification
- C 05
- Replacing
- GB/T 15721.3-1995
Issued by: Standardization Administration of China
Contents
- Foreword
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Measuring upper limb amputation stumps
- 4.1 Reference level and plane
- 4.2 Stumps Measurement
Foreword
GB/T 15721 "Prosthetics and orthotics - Limb deficiencies" is divided into five parts.
--- Part 1. congenital limb deficiencies described method;
--- Part 2. Method of describing lower limb amputation stumps;
--- Part 3. Method of describing upper limb amputation stumps;
--- Part 4. Description amputation reasons;
--- Part 5. description of the clinical symptoms of amputees.
This section GB/T 15721 Part 3.
This section identical with ISO 8548-3:1993 "Prosthetics and orthotics - Limb deficiencies - Part 3. Description of upper limb amputation stumps Party Law "(in English).
For ease of use, this section made the following editorial changes.
a) Remove the preface to the international standards;
b) "this International Standard" by "this section." this Part replaces GB/T 15721.3-1995 "Prosthetics and orthotics - Limb deficiencies - Part 3. Description of upper limb amputation stumps Party law". Section compared with the GB/T 15721.3-1995, major changes in the following.
a) the normative references, the references GB/T 14191.1 "Prosthetics and orthotics academic language - Part 1. In vitro false limbs in vitro and limb orthotics basic terminology "(GB/T 14191.1-2009, ISO 8549-1. 1989, IDT);
b) on the part of the terms and definitions have been modified, such as the "axillary plane" to "armpit plane", "front elbow folds flat" to "elbow Anterior cubital fossa stripes at the plane, "and so on;
c) a description of upper limb amputation stumps partially modified, such as the "residual limb paresthesias" to "residual limb skin feel weakened" "Residual limb soft tissue hardness. moderate/hard/soft" to "the hardness of the residual limb soft tissue. moderate/relaxation/solid" and so on.
Appendix A of this section is an informative annex.
This section proposed by the People's Republic of China Ministry of Civil Affairs.
This part of the National Rehabilitation and special equipment Standardization Technical Committee on Persons with Disabilities (SAC/TC148) centralized.
This section drafted by. China Rehabilitation Devices Association, China Rehabilitation Research Center, the National Research Center for Rehabilitation Technical Aids.
Introduction
There have been many kinds of amputation stump to the classification of methods, but none of the generally accepted method in which a variety of reasons. Small clinical Group members in different countries, different patients, which can only study different methods to suit their needs. Hence the need for an international to compare the works of different, from patient to patient's general approach. A variety of medical staff, including surgeons received training in different (especially Notably those related to rehabilitation), physical therapists and occupational therapists and prosthetists, accept and use a descriptive standard stump party law. This method epidemic experts and government officials responsible for health equally valuable.
Methods have been developed should meet the needs of different members of the treatment team, and be able to describe the stumps for ease reflected in the records of the party Type record, this part of GB/T 15721 is intended to define the minimum information described, this information should have taken the computer analysis Carolina capacity.
GB/T 15721.3-2009/ISO 8548-3:1993 Prosthetics and orthotics - Limb deficiencies Part 3. Method of describing upper limb amputation stumps
1 Scope
This section GB/T 15721 specifies the way of describing upper limb amputation stumps method, and recording information as described.
2 Normative references
The following documents contain provisions which, through reference GB/T 15721 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section.
GB/T 14191.1 Prosthetics and orthotics academic language - Part 1. Basic terminology external limb prostheses and external orthoses (GB/T 14191.1-2009, ISO 8549-1. 1989, IDT) GB/T 15721.1 Prosthetics and orthotics - Limb deficiencies - Part 1. congenital limb deficiencies described method (GB/T 15721.1-2009, ISO 8548-1. 1989, IDT) ISO 8549-2. 1989 Prosthetics and orthotics academic language - Part 2. With external limb prostheses and prosthetic users such relevant the term
3 Terms and Definitions
GB/T 14191.1, GB/T 15721.1 and ISO 8549-2. terms and definitions established in 1989 applies to GB/T 15721 of the present section.
4 Measuring upper limb amputation stumps
4.1 Reference level and plane
Define the respective amputation 4.1.1 and 4.1.2 as described in the relevant reference position and the plane. Patients make the best use of standing posture Stump in a natural state droop.
4.1.1 Reference level
4.1.1.1 --- armpit plane perpendicular to the centerline of the most proximal arm plane, this can be measured to the top of the girth.
4.1.1.2 plane --- the medial condyle of the humerus through the horizontal plane.
4.1.1.3 stump stump end plane --- located at the end of the level.
4.1.1.4 ulnar styloid ulnar styloid flat --- by the top level.
4.1.1.5 humerus bone end flat --- by and through the radial amputation stumps end of the bone level.
4.1.1.6 The minimum girth plane position --- elbow amputation stump smallest girth location.
4.1.2 Plane
--- Ulnar shaft plane behind the plane after 4.1.2.1 ulna, elbow flexion 90 ° when the forearms parallel to the centerline.
4.1.2.2 elbow antecubital fossa stripes at the plane --- when elbow flexion 90 °, is located in front of the elbow elbow fossa stripes at the surface. That Plane perpendicular to the center line of the forearm.
4.2 Stumps Measurement
4.2.1 Length Measurement
(Table 1 to Table 7) Measure and record the measurement results in accordance with the provisions of the corresponding table of the various parts of the amputation.
GB/T 15721.3-2009/ISO 8548-3:1993
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 8 pages — is available in the English PDF.
Referenced standards
Normative references
GB/T 15721 · GB/T 14191.1 · GB/T 14191.1-2009 · ISO 8549 · GB/T 15721.1 · GB/T 15721.1-2009 · ISO 8548
How to Download GB/T 15721.3-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 10009-2026 — Acrylonitrile-butadiene-styrene (ABS) plastic extruded sheets
Secure payment via Stripe
Payments accepted
GB/T 15721.3-2009
$165.00