GB/T 14208.1-2009Textile-glass-reinforced plastics -- Determination of mechanical properties on rods made of roving-reinforced resin -- Part 1: General considerations and preparation of rods (English PDF)

Foreword

GB/T 14208 "glass fiber reinforced plastic roving - reinforced resin rod measuring mechanical properties" is divided into four parts.

--- Part 1. General considerations and preparation of rods;

--- Part 2. Determination of flexural strength;

--- Part 3. Determination of compression strength;

--- Part 4. apparent interlaminar shear strength was measured.

This section GB/T 14208 Part 1, this part identical with ISO 3597-1:2003 "woven glass fiber reinforced plastic Part 1 Determination of roving-reinforced resin material mechanical properties on rods. General and rods prepared "(in English).

This section is equivalent translation ISO 3597-1:2003, identical in technical content.

For ease of use, this section made the following editorial changes.

a) to the "international standards" to the "standard" to "this part of ISO 3597" with the words "GB/T 14208 this part" or "the section";

b) Remove the preface international standards;

c) increase the national standard foreword;

d) the "Normative references" international standards with the corresponding equivalent international standards in place of national standards listed chapter.

Appendix A of this section is an informative annex.

This part is proposed by the China Building Materials Federation.

The fiber-reinforced plastic part by the National Standardization Technical Committee (SAC/TC39) centralized.

This section is responsible for drafting unit. Beijing glass Composite Material Co., Ltd.

1 Scope

This section GB/T 14208 specifies the rovings for the GB/T 14208 other part of the test reinforced resin rod (hereinafter referred to as Stick) preparation.

2 Normative references

The following documents contain provisions which, through reference GB/T 14208 in this section constitute provisions of this section. For dated references, all subsequent amendments (excluding corrections) or revisions do not apply to this section, however, encourage an agreement under this section Parties to study the latest versions of these documents. For undated reference documents, the latest versions apply to this section.

GB/T 2918 plastic conditioning and environmental standards (GB/T 2918-1998, idtISO 291.1997) Test GB/T 14208.2 Textile glass reinforced plastics - Determination of roving - reinforced resin rod mechanical properties Part 2. Bending strength Determination (GB/T 14208.2-2009, ISO 3597-2:2003, IDT) GB/T 14208.3 Textile glass reinforced plastics - Determination of roving - reinforced resin rod mechanical properties - Part 3. Compressive strength Determination (GB/T 14208.3-2009, ISO 3597-3:2003, IDT) GB/T 14208.4 Textile glass reinforced plastics - Determination of roving - reinforced resin rod mechanical properties - Part 4. apparent interlaminar Determination of shear strength (GB/T 14208.4-2009, ISO 3597-4:2003, IDT) ISO 1172 Textile glass reinforced plastics --- prepregs, molding compounds and laminates of textile glass and mineral filler content measurement calcination Principle 3