GB/T 13277.2-2015Compressed air -- Part 2: Test methods for oil aerosol content (English PDF)
压缩空气 第2部分:悬浮油含量测量方法
This is a limited preview
Buy now to download the full PDF (22 pages)
Need quotation for your management?
Get a formal quotation for GB/T 13277.2-2015 in 30 minutes.
Issued by
General Administration of Quality Supervision, Inspection and Quarantine of the People 's Republic of China
Level / Type
National · Recommended
Issue date
December 31, 2015
Implementation date
June 30, 2016
Scope
GB/T 13277.2-2015 is the English-translated version of 压缩空气 第2部分:悬浮油含量测量方法.
GB/T 13277.2-2015 — This part of GB/T 13277 specifies the sampling and quantitative analysis of liquid and suspended oils in compressed air (Method A and Method B).
This part applies to the general use of compressed air system in the oil content measurement, oil measurement range of 0.001mg/m3 ~ 40mg/m3. This section does not apply to the measurement of the oil vapor content in compressed air.
See also ISO 8573-5 "Compressed Air Part 5 Points. oil vapor and organic solvent measurement method ".
Found what you need?
Document preview — GB/T 13277.2-2015
National Standard of the People's Republic of China
- ICS
- 23.140
- Classification
- J 72
Issued by: General Administration of Quality Supervision, Inspection and Quarantine of the People 's Republic of China
Contents
- Preface
- 1 Scope
- 2 Normative reference document
- 3 Terms and definitions
- 4 Units
- 5 Standard state
- 6 Test Method Selection Guide
Foreword
GB/T 13277 "Compressed air" is divided into 9 parts.
- Part 1. Pollutant Purification Level;
- Part 2. Suspended oil content measurement method;
- Part 3. Humidity measurement method;
- Part 4. Solid particle measurement methods;
- Part 5. Methods for the measurement of oil vapor and organic solvents;
- Part 6. Measurement of gaseous pollutant content;
- Part 7. Measurement of active microbial content;
- Part 8. Solid particle mass concentration measurement method;
Part 9. Methods for the measurement of liquid water content.
This part is part 2 of GB/T 13277.
This part is drafted in accordance with the rules given in GB/T 1.1-2009.
This part uses the re-drafting method to modify ISO 8573-2.:2007 "Compressed air Part 2. Suspended oil content measurement method" (English version).
Taking into account our national conditions, this part of the use of ISO 8573-2.:2007, made some changes. The technical differences have been incorporated into the text and in the margins of the terms to which they relate. These technical differences and their originals are given in Appendix D for a list of references.
For ease of use, this section also makes the following editorial changes.
a) the word "international standard" is replaced by the words "this part";
b) Replace the comma as a decimal point with a decimal point "."
c) Replace "bar" with "MPa" for pressure units;
d) Deleting ISO 8573-2.:2007 Preface.
This part is made by the China Machinery Industry Federation.
This part is headed by the National Standardization Technical Committee of Compressors (SAC/TC145).
This part of the drafting unit. Hefei General Machinery Research Institute, Hangzhou Risheng purification equipment Co., Ltd., Guangzhou, Guangdong and Guangdong purification Technology Co., Ltd.
Division, Wuxi City Hualing Filter Equipment Co., Ltd., Hefei General Environmental Control Technology Co., Ltd., Hefei General Electromechanical Products Testing Institute Limited liability company, Shanghai ultrafiltration compressor purification equipment Co., Ltd., Xi'an joint ultrafiltration purification equipment Co., Ltd., Hangzhou than Beisi filter technology Limited company, Guangdong Tai'an Iraq Overseas Chinese Gas Equipment Co., Ltd., Shenzhen Hong-day purification equipment Technology Co., Ltd.
1 Scope
This part of GB/T 13277 specifies the sampling and quantitative analysis of liquid and suspended oils in compressed air (Method A and Method B).
This part applies to the general use of compressed air system in the oil content measurement, oil measurement range of 0.001mg/m3 ~ 40mg/m3.
This section does not apply to the measurement of the oil vapor content in compressed air. See also ISO 8573-5 "Compressed Air Part 5 Points. oil vapor and organic solvent measurement method ".
2 Normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document.
GB/T 13277.1 Compressed air - Part 1. Degree of purification of pollutants (GB/T 13277.1-2008, ISO 8573-1.:2001, MOD) GB/T 30475.1 Test methods for compressed air filters - Part 1. Suspension oils (GB/T 30475.1-2013, ISO 12500-1.:2007, MOD)
3 Terms and definitions
GB/T 13277.1 Definitions and the following terms and definitions apply to this document.
Oil
A mixture of six or more carbon atoms, i.e., C6, 3.2 Suspension oil oilaerosol Suspension of suspended liquid oil mixture suspended in the gaseous medium.
Wall flow walflow
Tube part of the air flow is no longer suspended when the part of the liquid pollutants.
4 Units
The units used in this section are units commonly used by the International System of Units (SI).
5 Standard status
The standard conditions for the description of the suspended oil content are as follows.
a) air temperature. 20 ° C;
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 22 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 16665-2025Monitoring and testing for energy saving of air compressor unit and air distribution system
- GB/T 42525-2023Technical specification for microfiltration membrane sterilizing system
- GB/T 13277.9-2022Compressed air - Part 9: Test methods for liquid water content
- GB/T 13277.5-2019Compressed air -- Part 5: Test methods for oil vapour and organic solvent content
- GB/T 30475.4-2017Filters for compressed air -- Test methods -- Part 4: Water
How to Download GB/T 13277.2-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 13277.1-2023 — Compressed air - Part 1: Contaminants and purity classes
GB/T 13277.3-2015 — Compressed air -- Part 3: Test methods for measurement of humidity
GB/T 13277.4-2015 — Compressed air -- Part 4: Test methods for solid particle content
Secure payment via Stripe
Payments accepted
GB/T 13277.2-2015
$305.00