Valid

GB/T 13163.2-2021Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 2: Specific requirements for 222Rn and 220Rn measuring instruments (English PDF)

辐射防护仪器 氡及氡子体测量仪 第2部分:222Rn和220Rn测量仪的特殊要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (37 pages)

Need quotation for your management?

Get a formal quotation for GB/T 13163.2-2021 in 30 minutes.

Issued by

State Administration for Market Regulation, China National Standardization Administration

Level / Type

National · Recommended

Issue date

May 21, 2021

Implementation date

December 1, 2021

Scope

GB/T 13163.2-2021 is the English-translated version of 辐射防护仪器 氡及氡子体测量仪 第2部分:222Rn和220Rn测量仪的特殊要求.

GB/T 13163.2-2021 is the Chinese standard "Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 2: Specific requirements for 222Rn and 220Rn measuring instruments".

Its scope clause reads: This document specifies special instruments for measuring airborne 222Rn and 220Rn activity concentrations in outdoor, residential and workplace (including underground mines).

Claim. This document applies to almost all types of electronic instruments based on single-point measurement or continuous measurement. 222Rn is made by pumping or diffusion And/or 220Rn air enters the sensitive volume of the detection unit or the activity concentration can be measured by air sampling (instantaneous sampling) at a specific time.

Various types of instruments for measurement are specified in IEC 61577-1. This document does not apply to instruments using activated carbon adsorption, electret or solid nuclear track detectors.

Found what you need?

Document preview — GB/T 13163.2-2021

National Standard of the People's Republic of China

Classification
F 84

Issued by: State Administration for Market Regulation, China National Standardization Administration

Contents

  • Foreword
  • Introduction
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Overall design considerations
  • 4.1 Measurement design considerations
  • 4.2 Operation and maintenance design considerations
  • 5 Technical components
  • 5.1 Sampling device
  • 5.2 Radiation detection device
  • 5.3 Data Processing and Recording
  • 5.4 Display of measurement
  • 5.5 Power supply
  • 6 Test conditions
  • 6.1 Overview
  • 6.2 Standard test conditions
  • 6.3 Conduct of the test
  • 6.4 Reference Radon
  • 7 Requirements and tests for radiation detection performance
  • 7.1 Reference response to test source
  • 7.2 Cross-interference of other radon isotopes
  • 7.3 Linearity of the indicated value
  • 7.4 The statistical fluctuation of the instrument
  • 7.5 Response time
  • 7.6 Signal accumulation
  • 8 Air circuit performance requirements and tests
  • 8.1 Overview
  • 8.2 Flow stability
  • 8.3 Accuracy of flow measurement
  • 8.4 Influence of filter pressure drop
  • 8.5 Indication value of low sampling flow rate
  • 9 Environmental performance requirements and tests
  • 9.1 Environmental gamma radiation response
  • 9.2 Ambient temperature
  • 9.3 Relative humidity and condensate
  • 9.4 Atmospheric pressure
  • 10 Electrical performance requirements and tests
  • 10.1 Power changes
  • 10.2 Battery test
  • 11 Mechanical performance requirements and tests
  • 11.1 Requirements
  • 11.2 Test method
  • 12 Operation and Maintenance Manual
  • 13 Type test report and certificate

1 Scope

This document specifies special instruments for measuring airborne 222Rn and 220Rn activity concentrations in outdoor, residential and workplace (including underground mines).

Claim.

This document applies to almost all types of electronic instruments based on single-point measurement or continuous measurement. 222Rn is made by pumping or diffusion

And/or 220Rn air enters the sensitive volume of the detection unit or the activity concentration can be measured by air sampling (instantaneous sampling) at a specific time.

Various types of instruments for measurement are specified in IEC 61577-1.

This document does not apply to instruments using activated carbon adsorption, electret or solid nuclear track detectors.

2 Normative references

The contents of the following documents constitute the indispensable clauses of this document through normative references in the text. Among them, dated quotations

Only the version corresponding to that date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to

This document.

ISO 11665-1 Radioactivity measurement in the environment Air. 222Rn Part 1.Sources and related measurements of radon and its short-lived progeny

Method (Measurementofradioactivityintheenvironment-Air.radon-222-Part 1.Originsofradonand itsshort-liveddecayproductsandassociatedmeasurementmethods)

ISO /IEC Guide 98-3.2008 Measurement Uncertainty Part 3.Guidelines for Expression of Measurement Uncertainty (GUM.1995)

[Uncertaintyofmeasurement-Part 3.Guidetotheexpressionofuncertaintyinmeasurement(GUM.

1995)]

IEC 60068-2-27 Environmental Testing Part 2-27.Test Method Test Ea and Guideline. Impact (Environmentaltes- ting-Part 2-27.Test-TestEaandguidance.Shock)

Note. GB/T 2423.5-2019 Environmental Test Part 2.Test Method Test Ea and Guideline. Impact (IEC 60068-2-27.2008, IDT)

IEC 61000-6-4 Electromagnetic Compatibility (EMC) Part 6-4.General Standards for Emission Standards in Industrial Environments (Electromag- neticcompatibility(EMC)-Part 6-4.Genericstandards-Emissionstandardforindustrialenviron- ments]

Note. GB 17799.4-2012 EMC general standard emission in industrial environment (IEC 61000-6-4.2011, IDT)

IEC 61140 Electric shock protection devices and common parts of equipment (Protection against electricshock-Commonas- pectsforinstalationandequipment)

Note. GB/T 17045-2020 Electric shock protection devices and general parts of equipment (IEC 61140.2016, IDT)

IEC 61187 Electrical and electronic measuring equipment documents (Electricalandelectronicmeasuringequipment-Docu- mentation)

Note. GB/T 16511-1996 electrical and electronic measuring equipment accompanying documents (IEC 61187.1993, IDT)

IEC 61577-1 Radon and Radon Progeny Measuring Instruments for Radiation Protection Part 1.General Principles (Radiationprotectionin- strumentation-Radonandradondecayproductmeasuringinstruments-Part 1.Generalprinciples)

Note. GB/T 13163.1-2009 Radon Protection Instruments Radon and Radon Progeny Measuring Instruments Part 1.General Principles (IEC 61577-1.2006, IDT)

GB/T 4079 | GB/T 13286 | NB/T 20318 | GB/T 13161 | GB/T 13163.4 | GB/T 13163.3 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 37 pages — is available in the English PDF.

Referenced standards

How to Download GB/T 13163.2-2021

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
37 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 13163.2-2021

$300.00