Valid

GB/T 10188-2013Fixed capacitors for use in electronic equipment -- Part l3: Sectional specification -- Fixed polypropylene film dielectric metal foil d.c. capacitors (English PDF)

电子设备用固定电容器第13部分：分规范金属箔式聚丙烯膜介质直流固定电容器

Preview PDF

This is a limited preview

Buy now to download the full PDF (17 pages)

Need quotation for your management?

Get a formal quotation for GB/T 10188-2013 in 30 minutes.

Issued by

Standardization Administration of China

Level / Type

National · Recommended

Issue date

December 31, 2013

Implementation date

August 15, 2014

Scope

GB/T 10188-2013 is the English-translated version of 电子设备用固定电容器第13部分：分规范金属箔式聚丙烯膜介质直流固定电容器.

GB/T 10188-2013 — This section applies to an electronic device for polypropylene film as a medium, a metal foil as an electrode of the DC capacitors. This section does not include fixed electromagnetic interference suppression capacitors IEC 60384-14 regulations.

Found what you need?

Document preview — GB/T 10188-2013

National Standard of the People's Republic of China

ICS: 31.060.30
Classification: L 11
Replacing: GB/T 10188-1988

Issued by: Standardization Administration of China

Preface
1 General
1.1 Scope
1.2 Objective
1.3 Normative references
1.4 Detail specification shall specify the contents of
1.5 Terms and Definitions
1.6 Flag
2 3 priority ratings and characteristics
2.1 Priority 3 properties
2.2 Priority Rating
3 Quality assessment procedures
3.1 The initial stage of manufacture
3.2 Structurally similar elements
3.3 Certified records of released lots of
5 3.4 Qualification approval
3.5 Quality conformance inspection
4 Test and measurement methods
4.1 Size and appearance inspection seized
4.2 Electrical Test
14 4.3 Terminal Strength
4.4 Resistance to soldering heat
4.5 Weldability
4.6 Rapid change of temperature
15 4.7 Vibration
15 4.8 Collision
4.9 Shock
4.10 Climatic sequence

Foreword

"Fixed capacitors for use in electronic equipment" series of national standards divided into the following sections.

--- Part 1. Generic specification (GB/T 2693-2001/IEC 60384-1:1999);

--- Part 2. Sectional specification - Fixed metallized polyethylene terephthalate film dielectric dc capacitors (GB/T 7332-2011 /IEC 60384-2:2005);

--- Part 2-1. Blank detail specification - Fixed metallized polyethylene terephthalate film dielectric dc capacitors - Assessment level E and EZ (GB/T 7333-2012/IEC 60384-2-1:2005);

--- Part 3. Sectional specification for surface mounting MnO2 solid electrolyte capacitors - (IEC 60384-3:2007);

--- Part 3-1. Blank detail specification surface mount MnO2 solid electrolyte tantalum capacitors - Assessment level EZ (IEC 60384-3-1:2007);

--- Part 4. Sectional specification solid and non-solid electrolyte aluminum electrolytic capacitors (GB/T 5993-2003/IEC 60384-4.

1998, No. 1 amendments 2000);

--- Part 4-1. Blank detail specification non-solid electrolyte aluminum electrolytic capacitors - Assessment level EZ (GB/T 5994-2003 /IEC 60384-4:2000);

--- Part 4-2. Blank detail specification solid (MnO2) electrolyte aluminum electrolytic capacitors - Assessment level EZ (SJ/T 11068-96/IEC 60384-4-2. 1985);

--- Part 6. Sectional specification - Fixed metallized polycarbonate film dielectric dc capacitors (IEC 60384-6:2005);

--- Part 7. Sectional specification metal foil polystyrene film dielectric dc capacitors (GB/T 10185-2012);

--- Part 7-1. Blank detail specification polystyrene film dielectric metal foil dc capacitors - Assessment level E (GB/T 10186-2012);

--- Part 8. Sectional specification Fixed capacitors of ceramic dielectric, Class 1 (GB/T 5966-2011/IEC 60384-8:2005);

--- Part 8-1. Blank detail specification Fixed capacitors of ceramic dielectric, Class 1 - Assessment level EZ (GB/T 5967-2011 /IEC 60384-8-1:2005);

--- Part 9. Sectional specification Fixed capacitors of ceramic dielectric, Class 2 (GB/T 5968-2011/IEC 60384-9:2005);

--- Part 9-1. Blank detail specification Fixed capacitors of ceramic dielectric, Class 2 - Assessment level EZ (GB/T 5969-2012 /IEC 60384-9-1:2005);

--- Part 11. Sectional specification metal foil polyethylene terephthalate film dielectric dc capacitors (IEC 60384-11:2008);

--- Part 11-1. Blank detail specification metal foil polyethylene terephthalate film dielectric dc capacitors Assessment level EZ (IEC 60384-11-1:2008);

13.2006);

--- Part 13-1. Blank detail specification polypropylene film dielectric metal foil dc capacitors - Assessment levels E and EZ (GB/T 10189-2013/IEC 60384-13-1:2006);

--- Part 14. Sectional specification curb the power of electromagnetic interference with a fixed capacitor (GB/T 14472-1998/IEC 60384-14.

1993, No. 1 amendments 1995);

--- Part 14-1. Blank detail specification curb the power of electromagnetic interference capacitors - Assessment level D (GB/T 14473-1998/IEC 60384-14-1:1993);

--- Part 15. Sectional specification non-solid or solid electrolyte capacitors - (GB/T 7213-2003/IEC 60384-15. 1982, no. 1 amendments. 1987, No. 2 amendments 1992);

--- Part 15-1. Blank detail specification solid electrolyte tantalum foil capacitors - Assessment level E (GB/T 12794-1991 /IEC 60384-15-1. 1984);

--- 15-2. Blank detail specification sintered solid electrolyte tantalum capacitors - Assessment level E (GB/T 12795-1991/IEC 60384-15-2. 1984);

--- 15-3. Blank detail specification solid electrolyte and porous anode tantalum capacitors - Assessment level E (GB/T 7214-2003/IEC 60384-15-3. 1984);

--- Part 16. Sectional specification - Fixed metallized polypropylene film dielectric dc capacitors (GB/T 10190-2012/IEC 60384-16:2005);

--- Part 16-1. Blank detail specification metallized polypropylene film dielectric dc capacitors - Assessment levels E and EZ (GB/T 10191-2011/IEC 60384-16-1:2005);

--- Part 17. Sectional specification - Fixed metallized polypropylene film dielectric ac and pulse capacitors (GB/T 14579-2013 /IEC 60384-17:2005);

--- Part 17-1. Blank detail specification metallized polypropylene film dielectric ac and pulse capacitors - Assessment level E and EZ (GB/T 14580-2013/IEC 60384-17-1:2005);

--- Part 18. Sectional specification surface mount solid and non-solid electrolyte aluminum electrolytic fixed capacitors (GB/T 17206-1998 /IEC 60384-18:1993, No. 1 amendments 1998);

--- Part 18-1. Blank detail specification surface mount solid (MnO2) electrolyte aluminum capacitors - Assessment level EZ (GB/T 17207-2012/IEC 60384-18-1:2007);

--- 18-2. Blank detail specification non-solid electrolyte chip aluminum electrolytic capacitors - Assessment level E (GB/T 17208-1998/IEC 60384-18-2:1993);

--- Part 19. Sectional specification - Fixed metallized polyethylene terephthalate film dielectric surface mount dc capacitors (GB/T 15488-2013/IEC 60384-19:2006);

--- Part 19-1. Blank detail specification - Fixed metallized polyethylene terephthalate film dielectric surface mount dc capacitors Assessment level EZ (GB/T 16467-2013/IEC 60384-19-1:2005);

--- Part 21. Sectional specification Class 1 surface mount multilayer ceramic capacitors fixed (GB/T 21041-2007/IEC 60384-21.

2004);

--- Part 21-1. Blank detail specification Class 1 surface mount multilayer ceramic capacitors fixed (GB/T 21038-2007 /IEC 60384-21-1:2004);

--- Part 22. Sectional specification surface mount multilayer ceramic multilayer Class 2 Fixed capacitors (GB/T 21042-2007/IEC 60384-22.

2004);

--- Part 22-1. Blank detail specification Class 2 surface mount multilayer ceramic capacitors fixed (GB/T 21040-2007 /IEC 60384-22-1:2004).

This section "Fixed capacitors for use in electronic equipment" in Section 13.

This section drafted in accordance with GB/T 1.1-2009 given rules.

This Part replaces GB/T 10188-1988 "Fixed capacitors for use in electronic equipment - Part 13. Sectional specification metal foil polypropylene film DCcapacitor. " This section compared with the GB/T 10188-1988, the main changes are as follows.

--- A1 group and B1 group increased element solvent and solvent resistance test mark;

--- Table 5 added A0 grouping requirements;

--- The A1 IL packet by the S-4 to S-3;

--- A2 by the grouping IL II to S-3;

--- Low air pressure by the pressure to 8.5kPa 8kPa;

--- Varies with temperature characteristics by the ND to D;

--- 3.5.4 in Table 5 and Table 6 Assessment level EZ increased requirements;

--- 2.1.1 duration steady state damp heat test canceled 4 days.

This section identical with IEC 60384-13:2006 "Fixed capacitors for use in electronic equipment - Part 13. Sectional specification metal foil polypropylene Ene-film dielectric dc capacitors "in this section do the following editorial changes.

--- IEC Page 2 Note 2 to Note 1;

--- In IEC 60384-13:2006 in 3.4.1.2, will "have to go through Table 1 and Table 2 provides that" corrected to "must Tables 3 and 4 after specified. " this part of the former People's Republic of China Ministry of Information Industry.

This section is under the jurisdiction of the National electronic equipment with a resistor-capacitor Standardization Technical Committee member.

This section is drafted. a state-run seventh Wuchang.

1 General

1.1 Scope

This section applies to an electronic device for polypropylene film as a medium, a metal foil as an electrode of the DC capacitors.

This section does not include fixed electromagnetic interference suppression capacitors IEC 60384-14 regulations.

1.2 Purpose

The purpose of this section is to this type of capacitor predetermined priority ratings and characteristics, and from GB/T 2693-2001 "electronic equipment Fixed capacitors - Part 1. Generic specification ", select the appropriate quality assessment procedures, tests and measuring methods and to give general performance begging. Detailed specifications referenced test severities and requirements prescribed in this section, this section shall have the same performance level or higher, do not allow Xu reduce performance levels.

1.3 Normative References

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 321-2005 priority number and priority number system (ISO 3. 1973, IDT) GB/T 2421.1-2008 Environmental testing for electric and electronic products overview and guidance (IEC 60068-1. 1988, IDT) GB/T 2471-1995 resistors and capacitors priority number and priority number system (idt IEC 60063. 1963, No. 1 amendments (1967), No. 2 amendments (1977)) GB/T 2693-2001 Fixed capacitors for use in electronic equipment - Part 1. Generic specification (idt IEC 60384-1:1999) GB/T 14472-1998 Fixed capacitors for use in electronic equipment - Part 14. Sectional specification curb the power of electromagnetic interference with a fixed electrode Container (idt IEC 60384-14:1993) IEC 60410 count inspection Sampling plans and procedures

1.4 Detailed specification content to be specified

Blank detail specification shall be about to develop a detailed specification.

Detail specification shall prescribe a lower total specification, sectional or blank detail specification requirements stipulated. When including more stringent requirements, should Listed in the detailed specification of 1.9, and should be noted in the test schedule, with the "*" indicates.

Note. For convenience, the contents of 1.4.1 can be represented in tabular form.

Each detail specification shall specify the following, and reference values \u200b\u200bshould be given priority from the corresponding provisions of this section given selection.

1.4.1 Outline drawing and dimensions

For easier identification and comparison with other capacitor, the capacitor should outline drawing. Detailed specification should provide interchangeability and influence its installation size tolerances. All dimensions should be in millimeters.

Should normally be given capacitor body length, width and height and the lead pitch, for a cylindrical capacitor should give a straight body

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.

Referenced standards

Normative references

GB/T 321-2005Preferred numbers -- Series of preferred numbers

ISO 3 · GB/T 2421.1-2008 · IEC 60068 · GB/T 2471-1995 · IEC 60063 · GB/T 2693-2001 · IEC 60384 · GB/T 14472-1998 · IEC 60410

How to Download GB/T 10188-2013

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.