GB 50774-2012Code for construction and acceptance of dry-type smoothing reactors in converter stations at ±800kV and below (English PDF)
±800kV及以下换流站干式平波电抗器施工及验收规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB 50774-2012 in 30 minutes.
Issued by
State Administration for Market Regulation; Standardization Administration of China
Level / Type
National · Mandatory
Issue date
January 1, 2012
Implementation date
January 1, 2012
Scope
GB 50774-2012 is the English-translated version of ±800kV及以下换流站干式平波电抗器施工及验收规范.
GB 50774-2012 is the Chinese standard "Code for construction and acceptance of dry-type smoothing reactors in converter stations at ±800kV and below".
Found what you need?
Document preview — GB 50774-2012
National Standard of the People's Republic of China
- ICS
- 29.240.01
Contents
- [Preview only]
- 1 General Provisions
- 2 Normative references
- 2.1 Terms
- 2.2 Symbols
- 2.3 Other windows
- 3 Terms and definitions
- 3.1 Basic Requirements
- 3.2 Technical Requirements on the Connection of Power Plant to the Power System
- 3.3 Requirement on the Regulating Performance of the Generating Unit
- 4 Meteorological Conditions
- 4.1 Heating (Cooling) Electrical Loads and Heating (Cooling) Medium
- 4.2 Electrical Loads
- 4.3 Installation of stator and rotor 7
- 4.4 Installation of collector ring, brush and coaxial excitation device 10
- 4.5 Installation of cooling system 11
- 4.6 Drying 12
- 4.7 Start up and commissioning 13
- 5 Test 2 Overview
- 5.1 General requirements 17
- 5.2 Storage and hoisting 17
- 5.3 Inspection and installation 17
- 5.4 Commissioning of individual equipment 20
- 6 Insulators and Fittings
- 6.1 General Requirements
- 6.2 Internal Planning of Plant Area
- 6.3 External Planning of Plant Area
- 6.4 Foundation for Concrete Pole and Precast Concrete Foundation
- 6.5 Rock Foundation
- 6.6 Winter, High-temperature and Raining Season Construction
- 6.7 Foundation Construction in Permafrost Regions
- 6.8 Maintenance and Repair
- 6.9 Requirements on Comprehensive Facilities
- 7 Insulation Coordination, Lightning Protection and Grounding
- 7.2 Layout of Main Plant Building
- 7.3 Overhaul Facilities
- 7.4 Comprehensive Facilities
- 7.5 Guy
- 7.6 Coal Blending Facilities
- 7.7 Coal Handling System of CFB Boiler
- 7.8 Limestone Handling and Pulverizing System of CFB Boiler
- 7.9 Auxiliary Coal Handling Facilities
- 8 Conductor Arrangement
- 8.2 Coal Unloading Facilities and External Transportation
- 8.3 Belt Conveyor System
- 8.4 Coal Storage Yard and Its Equipment
- 8.5 Coal Screening and Crushing Equipment
- 8.6 Storage and Preparation of Limestone
- 8.7 Control Mode
- 8.8 Auxiliary Facilities and Buildings for Coal Handling
- 8.9 CFB Boiler System
- 9 Tower Type
- 9.1 Boiler Equipment
- 9.2 Pulverized Coal Preparation
- 9.3 Air and Flue Gas System
- 9.4 Oil System for Ignition and Combustion Support
- 9.5 Auxiliary System and Equipment of Boiler
- 9.6 Startup Boiler
1 Foreword
GB 50774-2012 was issued by State Administration for Market Regulation; Standardization Administration of China on 28 May 2012.
The GB prefix, without a suffix, marks a mandatory standard: within its scope, compliance is required.
The document runs to 15 pages in English translation.
2 Scope Preview
GB 50774-2012 falls under ICS 29.240.01, in the field of electrical engineering.
This catalogue holds 209 other GB standards in that field.
In this catalogue, GB standards carry edition years from 1963 to 2026.
3 About this standard
Issued by: State Administration for Market Regulation; Standardization Administration of China
English translation: about 15 pages (approximate)
4 Classification and status
International classification (ICS): 29.240.01
Chinese Standard Classification (CCS): P 62
Prefix GB: mandatory standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download GB 50774-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 11118-2026 — Hydraulic fluids (L-HL, L-HM, L-HV, L-HS and L-HG type)
GB 11557-2026 — Provisions for protecting drivers from injury by the steering mechanism of motor vehicles
GB 11887-2026 — Jewellery - Fineness, marking and designation of precious metals
GB 50774-2012
$325.00