GB 31617-2014National Food Safety Standard -- Food Nutrition Enhancer -- Casein phosphopeptide (CPP) (English PDF)
食品安全国家标准 食品营养强化剂 酪蛋白磷酸肽
This is a limited preview
Buy now to download the full PDF (5 pages)
Need quotation for your management?
Get a formal quotation for GB 31617-2014 in 30 minutes.
Issued by
National Health and Family Planning Commission of PRC
Level / Type
National · Mandatory
Issue date
December 24, 2014
Implementation date
May 24, 2015
Scope
GB 31617-2014 is the English-translated version of 食品安全国家标准 食品营养强化剂 酪蛋白磷酸肽.
GB 31617-2014 is the Chinese standard "National Food Safety Standard -- Food Nutrition Enhancer -- Casein phosphopeptide (CPP)". Its scope clause reads: This standard applies to the food nutrition enhancer - casein phosphopeptide, which is produced by enzymatic hydrolysis, using milk or casein products as raw materials.
Its clauses include molecular structure and relative molecular mass; technical requirements. It was issued by the National Health and Family Planning Commission of PRC on 2014-12-24 and took effect on 2015-05-24.
Found what you need?
Document preview — GB 31617-2014
National Standard of the People's Republic of China
Issued by: National Health and Family Planning Commission of PRC
Contents
- 1 Scope...3
- 2 Molecular structure and relative molecular mass...3
- 3 Technical requirements...3
- Appendix A Inspection method...5
1 Scope
This standard applies to the food nutrition enhancer - casein phosphopeptide, which is produced by enzymatic hydrolysis, using milk or casein products as raw materials.
2 Molecular structure and relative molecular mass
The main active ingredient is a polypeptide, which contains 1 ~ 6 phosphoserine residues. The relative molecular mass is 1000 u ~ 5000 u.
3 Technical requirements
3.1 Sensory requirements
It shall comply with the provisions of Table 1.
3.2 Physical and chemical indicators
It shall comply with the provisions of Table 2.
3.3 Microbial indicators
Appendix A
Inspection method
A.1 General provisions
Unless otherwise specified in this standard, the purity of the reagents used shall be of analytical pure or higher. For the standard titration solutions, the standard solutions, preparations, products used for the determination of impurities, they shall be prepared in accordance with GB/T 601, GB/T 602, GB/T 603. The test water shall meet the requirements of grade 3 water in GB/T 6682. The solution, which is used in the test, refers to the aqueous solution, when the solvent is not specified.
A.2 Identification test
A.2.1 Reagents and materials
A.2.1.1 Sulfuric acid.
A.2.1.2 Copper sulfate (CuSO4·5H2O).
A.2.1.3 Potassium sulfate (K2SO4).
A.2.1.4 Mixed reagents: Sulfuric acid solution (mass fraction 25%) + ammonium
molybdate solution (25 g/L) + water + vitamin C solution (100 g/L), 1 + 1 + 2 +
1.
A.2.2 Analytical procedures
Transfer the dry precipitate (A.3.4), which is obtained from the determination of the content of casein phosphopeptide, into a Kjeldahl digestion tube. Add 10 mL of sulfuric acid and 1 g of catalyst (0.1 g of copper sulfate and 0.9 g of potassium sulfate). Heat to digest it completely. Take 1 mL of digestion solution in a test tube. Add 1 mL of water. Put it in boiling water bath, for 10 min. Take it out. Cool it to room temperature. Pipet 100 µL into another test tube. Add 1.9 mL of water. Then add 3 mL of mixed reagent. Keep it in a 45 °C water bath, for
20 min. Take out. The solution shall be blue.
A.3 Determination of casein phosphopeptide content
A.3.1 Method summary
Add a certain concentration of barium ions to the sample solution. The barium ions form bridges, between the casein phosphopeptide molecules. At an appropriate temperature and pH, adding a certain concentration of ethanol can
......
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 5 pages — is available in the English PDF.
How to Download GB 31617-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 11118-2026 — Hydraulic fluids (L-HL, L-HM, L-HV, L-HS and L-HG type)
GB 11557-2026 — Provisions for protecting drivers from injury by the steering mechanism of motor vehicles
GB 12021.4-2026 — Maximum allowable values of the energy consumption, water consumption and grades for electric washing machines and washer-dryers
Secure payment via Stripe
Payments accepted
GB 31617-2014
$75.00