GB 31573-2015Emission standards of pollutants for inorganic chemical industry (English PDF)

Foreword

In order to implement the Environmental Protection Law of the People's Republic of China, the Law of the People's Republic of China on the Prevention and Control of Water Pollution,

The People's Republic of China Marine Environmental Protection Law "and other laws and regulations, to protect the environment,

Prevention and control of pollution, promote inorganic chemical industry production process and pollution control technology progress, the development of this standard.

This standard specifies the emission limits, monitoring and monitoring requirements for water and air pollutants in inorganic chemical industrial enterprises.

Inorganic chemical industrial enterprises emissions of stench pollutants, environmental noise applicable to the corresponding national pollutant discharge standards, resulting in solid

The identification, disposal and disposal of waste shall apply to national standards for pollution control of solid wastes. Supporting the implementation of the power boiler "boiler big

Air Pollutant Discharge Standard "or" Thermal Power Plant Air Pollutant Emission Standard ".

This standard is the first release.

New enterprises Since July 1,.2015, the existing enterprises since July 1,.2017 from the implementation of this standard, the water pollutants and large

Air pollutant emission control in accordance with the provisions of this standard, no longer implement the "Integrated Wastewater Discharge Standard" (GB 8978-1996),

"Integrated Emission Standards for Air Pollutants" (GB 16297-1996) and "Industrial Furnace Air Pollutant Emission Standards" (GB

9078-1996). Local can also be based on local environmental protection needs and economic and technical conditions, by the provincial level

The people 's government approves the implementation of this standard in advance.

The state for the inorganic chemical industry has issued a special emission standards (such as "sulfuric acid industrial pollutant discharge standards" (GB

26132-2010)) shall be subject to the implementation of special emission standards in accordance with the applicable subject and shall not be subject to this standard.

This standard is the inorganic chemical industry, the basic requirements of pollutant discharge control. Local provincial people's government on this standard not yet

The provisions of the project, you can develop local pollutant discharge standards; the standards have been provided for the project, you can develop strict standards

Of the local pollutant discharge standards. Environmental impact assessment documents or sewage permit requirements are strictly in accordance with this standard or local standards, press

According to the approved environmental impact assessment document or the implementation of the sewage permit.

This standard is organized by the Ministry of Environmental Protection Science and Technology Standards Division.

The main drafting unit of this standard. China inorganic salt industry association, environmental protection department environmental standards institute, Kunming science and technology big

Science, Environmental Protection Department of South China Environmental Science Research Institute, Chongqing Municipal Environmental Science Research Institute, Jinan City Environmental Protection Science Research Institute.

This standard is approved by the Ministry of Environmental Protection on April 3,.2015.

This standard has been implemented since July 1,.2015.

This standard is explained by the Ministry of Environmental Protection.

Inorganic Chemical Industry Pollutant Discharge Standard

1 Scope of application

This standard specifies the inorganic acids, alkalis, salts, oxides, hydroxides, peroxides and simple industrial enterprises of water and the atmosphere

Pollutant emission limits, monitoring and supervision and management requirements.

This standard applies to inorganic acids, alkalis, salts, oxides, hydroxides, peroxides and simple industrial enterprises of water and the atmosphere

Pollutant Discharge Management and Construction of Inorganic Acid, Alkali, Salt, Oxide, Hydroxide, Peroxide and Elementary Industrial Enterprises

Environmental impact assessment, environmental protection facilities design, completion of environmental protection and acceptance of water pollutants and air pollution

Emissions management.

This standard does not apply to sulfuric acid, hydrochloric acid, nitric acid, caustic soda, soda ash, calcium carbide, inorganic phosphorus, inorganic coatings and pigments, phosphorus

Fertilizer, nitrogen and potash, potassium hydroxide and other inorganic chemical products and non-ferrous metals industry, water pollutants and air pollutants discharge pipe

Reason.

This standard applies to pollutant discharge permitted by law. Newly established sources of pollution and existing areas of special protection

Pollution source management, in accordance with the "People's Republic of China Water Pollution Control Law", "People's Republic of China Air Pollution Control Law"

"The People's Republic of China Marine Environmental Protection Law", "People's Republic of Solid Waste Pollution Prevention Law", "Chinese

The People's Republic of China Environmental Impact Assessment Law "and other laws, regulations, rules of the phase

Off regulations.

The water pollutant emission control requirements stipulated in this standard apply to enterprises that directly or indirectly discharge water pollution outside their statutory borders

The behavior of the dye.

2 normative reference documents

The contents of this standard refer to the following documents or their terms. Those who do not specify the date of the reference file, the effective version of the appropriate

For this standard.

Comprehensive Emission Standard for Wastewater

GB 9078 Emission standard for air pollutants from industrial furnaces

GB 16297 Integrated Emission Standard for Air Pollutants

Water quality - Determination of total phosphorus - Ammonium molybdate spectrophotometric method

Water quality - Determination of silver - Flame atomic absorption spectrophotometric method GB 11907

GB/T 6920 Determination of water quality pH - Glass electrode method

GB/T 7466 Determination of total chromium in water quality

GB/T 7467 Water quality - Determination of hexavalent chromium - Diphenylcarbazide spectrophotometric method

GB/T 7469 Determination of water quality Mercury potassium permanganate - Potassium persulfate digestion Dithizone spectrophotometric method

GB/T 7470 Water quality - Determination of lead - Dithizone spectrophotometric method

GB/T 7471 Water quality - Determination of cadmium - Dithizone spectrophotometric method

GB/T 7472 Determination of water quality - Dithizone spectrophotometric method

GB/T 7475 Water quality - Determination of copper, zinc, lead and cadmium - Atomic absorption spectrophotometric method

Water quality - Determination of fluoride - Ion selective electrode method

GB/T 7485 Water quality - Determination of total arsenic - Silver diethyldithiocarbamate spectrophotometric method

Water quality - Determination of suspended solids - Gravimetric method GB/T

Water quality - Determination of manganese - Potassium periodate spectrophotometric method GB/T 11906

GB/T 11910 Determination of water quality - Determination of butanedione oxime spectrophotometric method

Water quality - Determination of iron and manganese - Flame atomic absorption spectrophotometric method GB/T

Water quality - Determination of nickel - Flame atomic absorption spectrophotometric method GB/T

Water quality - Determination of chemical oxygen demand - Dichromate method GB/T

GB/T 14671 Determination of barium in water by potentiometric titration

GB/T 14678 Air quality - Hydrogen sulfide, methyl mercaptan methyl sulfide Dimethyl disulfide - Gas chromatographic method

Ambient air - Determination of lead - Flame atomic absorption spectrophotometric method GB/T

Determination of particulate matter and sampling method of gaseous pollutants in exhaust gas of fixed pollution sources GB/T 16157

Water quality - Determination of sulfide - Methylene blue spectrophotometric method GB/T 16489

HJ 480 ambient air - Determination of fluoride - Filtration - Fluoride ion selective electrode method

Environmental air - Determination of fluoride - Lime filter paper sampling - Fluoride ion selective electrode method

Determination of water quality cyanide and its spectrophotometric method

Determination of copper in water - Determination of copper - Diethyl dithiocarbamate spectrophotometric method

Determination of copper in water HJ 486 Determination of copper in water 2,9 - Dimethyl - 1, 10 - phenanthroline spectrophotometric method

HJ 487 Determination of water quality Fluoride - Alizarin blue sulfide visual colorimetric method

Water quality - Determination of fluoride - Fluorine reagent spectrophotometric method

HJ 489 Determination of water quality silver 3,5-Br2-PADAP spectrophotometric method

Determination of water quality silver - Cadmium reagent 2B spectrophotometric method

Technical specification for preservation and management of samples of water quality sampling

Technical Guidance for Water Quality Sampling

Technical specification for water quality sampling scheme design of HJ 495

HJ 533 Ambient air and determination of waste ammonia - Nessler reagent spectrophotometric method

HJ 535 - Determination of ammonia nitrogen - Nessler 's reagent spectrophotometric method

HJ 536 Water quality - Determination of ammonia - Salicylic acid spectrophotometric method

Determination of ammonia nitrogen in water - Distillation - neutralization titration method

HJ 540 Determination of ambient air and waste arsenic - Silver diethyldithiocarbamate spectrophotometric method (provisional)

HJ 542 Ambient air - Determination of mercury - Mercapto cotton enrichment - Atomic fluorescence spectrophotometry (provisional)

HJ 543 Fixed sources of waste - Determination of mercury - Cold atomic absorption spectrophotometric method (provisional)

HJ 544 fixed source of waste gas sulfur acid mist determination of ion chromatography (temporary)

HJ 547 Fixed source of waste gas Determination of chlorine gas Iodometric method (provisional)

HJ 548 Fixed source of waste gas Determination of hydrogen chloride Silver nitrate volumetric method (provisional)

HJ 549 Determination of Ambient Air and Waste Hydrogen Chloride Ion Chromatography (Temporary)

HJ 550 Water quality Determination of total cobalt 5-Chloro-2- (pyridylazo) -1,3-diaminobenzene spectrophotometry (provisional)

HJ 597 Water quality - Determination of mercury - Cold atomic absorption spectrophotometric method

Determination of barium in water - Graphite furnace atomic absorption spectrophotometric method

Determination of barium in water - Flame atomic absorption spectrophotometric method

HJ 629 Fixed sources - Determination of waste gas - Determination of sulfur dioxide - Non - dispersive infrared absorption method

HJ 636 Water quality - Determination of total nitrogen - Alkaline persulfate - resolved violet spectrophotometric method

HJ 637 Water quality - Determination of petroleum and animal and vegetable oils - Infrared spectrophotometric method

HJ 657 Determination of lead and other metal elements in air and waste particulate matter - Inductively coupled plasma mass spectrometry

HJ 665 - Determination of ammonia nitrogen - Continuous flow - Salicylic acid spectrophotometric method

Determination of ammonia nitrogen in water - Flow injection - salicylic acid spectrophotometric method

Determination of total nitrogen content - Continuous flow - Naphthylenediamine hydrochloride spectrophotometric method

Determination of total nitrogen content - Flow injection - Naphthylenediamine hydrochloride spectrophotometric method

HJ 670 Water quality - Determination of phosphate and total phosphorus - Continuous flow - Ammonium molybdate spectrophotometric method

HJ 671 Water quality - Determination of phosphate and total phosphorus - Flow injection - Ammonium molybdate spectrophotometric method

HJ 675 Fixed sources - Determination of exhaust nitrogen oxides - Acid - base titration method

HJ 685 Fixed source of waste gas - Determination of lead - Flame atomic absorption spectrophotometric method

HJ 692 Fixed sources - Determination of waste nitrogen oxides - Non - dispersive infrared absorption method

Determination of nitrogen oxides for fixed sources of pollution - Determination of potential oxides

Determination of mercury, arsenic, selenium, bismuth and antimony by atomic fluorescence spectrometry

Determination of 65 kinds of elements in water quality of HJ 700 - Inductively coupled plasma mass spectrometry

HJ/T 27 Determination of hydrogen chloride in fixed sources - Mercury thiocyanate spectrophotometric method

HJ/T 28 Determination of hydrogen cyanide in fixed exhaust gas by isonicotinic acid - Pyrazolone spectrophotometric method

HJ/T 29 Determination of chromic acid fog in fixed exhaust gas Diphenylcarbazide spectrophotometric method

HJ/T 30 Determination of chlorine in exhaust gas from stationary sources - Methyl orange spectrophotometric method

HJ/T 42 Determination of nitrogen oxides in the exhaust gas of fixed sources - Ultraviolet spectrophotometric method

HJ/T 43 Determination of nitrogen oxides in fixed exhaust gases - Naphthylenediamine hydrochloride spectrophotometric method

HJ/T 56 Determination of sulfur dioxide in exhaust gas from stationary sources - Iodometric method

Determination of Sulfur Dioxide in Fixed Air Pollutants by HJ/T 57

HJ/T 60 Determination of water quality sulfide iodometric method

HJ/T 63.1 Atmospheric fixed sources - Determination of nickel - Flame atomic absorption spectrophotometric method

HJ/T 63.2 Atmospheric fixed sources - Determination of nickel - Graphite furnace atomic absorption spectrophotometric method

HJ/T 63.3 Determination of nickel in atmospheric stationary sources Determination of nickel by butanedione oxime-n-butanol extraction spectrophotometry

HJ/T 64.1 Atmospheric fixed sources of pollution - Determination of cadmium - Flame atomic absorption spectrophotometric method

HJ/T 64.2 Atmospheric fixed sources of pollution - Determination of cadmium - Graphite furnace atomic absorption spectrophotometric method

HJ/T 64.3 Determination of Cadmium in Atmospheric Immobilization Source P-Azobenzene Diazoaminoazobenzenesulfonic acid Spectrophotometry

HJ/T 65 Atmospheric fixed sources - Determination of tin - Graphite furnace atomic absorption spectrophotometric method

HJ/T 67 Determination of fluoride in airborne fixed sources - Ion selective electrode method

HQ/T 70 Determination of chemical oxygen demand for high chlorine wastewater - Chlorine calibration method

Technical specification for continuous monitoring of flue gas emissions from fixed pollution sources HJ/T 75 (Trial)

HJ/T 76 fixed pollution source flue gas emissions continuous monitoring system technical requirements and testing methods (Trial)

Technical specification for surface water and wastewater monitoring

HQ/T 132 Determination of chemical oxygen demand for high chlorine wastewater. Potassium iodide alkaline potassium permanganate method

Determination of ammonia nitrogen in water. Determination of ammonia nitrogen by gas phase molecular absorption spectrometry

Water quality - Determination of total nitrogen - Gas phase molecular absorption spectrometric method

HJ/T.200 - Determination of water quality Sulfide - Gas phase molecular absorption spectrometric method

Technical specification for quality assurance and quality control of fixed pollution source monitoring

Technical specification for HJ/T 397 fixed source exhaust gas monitoring

HJ/T 399 Water quality - Determination of chemical oxygen demand - Fast digestion spectrophotometric method

"Administrative Measures for Automatic Monitoring of Pollution Sources" (State Environmental Protection Administration Decree No. 28)

"Environmental Monitoring Management Measures" (State Environmental Protection Administration Decree No. 39)

3 terms and definitions

The following terms and definitions apply to this standard.

Inorganic chemical industry

Production of inorganic acids, bases, salts, oxides, hydroxides, peroxides and inorganic acids by natural resources and industrial by-products.

Simple chemical products industry. This standard refers specifically to sulfuric acid, hydrochloric acid, nitric acid, caustic soda, soda ash, calcium carbide, inorganic phosphorus, inorganic

Paint and pigments, phosphate fertilizer, nitrogen fertilizer and potassium fertilizer, potassium hydroxide, nonferrous metals and other inorganic compounds manufacturing industry, the main

Including. heavy metal inorganic compounds industry, inorganic cyanide compounds industry, sulfur compounds and sulfate industry, halogen and its

Compound industry, boron compound and borate industry, silicon compound and silicate industry, calcium compound and calcium salt industry, magnesium compound

And magnesium salt industry, peroxide industry and metal potassium (sodium) industry.